Effect of heat treatment on microstructures and properties of a novel Al-Zn-Mg-Cu alloy for oil drilling

In view of the special requirements for strength, heat resistance and corrosion resistance of Al-Zn-Mg-Cu alloy for oil drilling, the Al-6.2 Zn-2.5 Mg-1.6 Cu alloy was prepared by increasing Cu content on basis of Russian Series 1953 alloy. The effect of heat treatment on the microstructures and properties of the alloy was characterized by optical microscope(OM), scanning electron microscope(SEM) and transmission electron microscope(TEM), and investigated by tensile test at room temperature, thermal exposure test and corrosion test. The results show that the strength after T6 aging treatment exhibit a decrease trend as an increase of the solution temperature from465 °C to 480 °C. After the solution treated by the rate of 470 °C/1 h, second phases dissolve into the matrix very well and the strength property reaches optimum. The alloy has better comprehensive properties treated by a solution treatment of 470 °C/1 h and then followed by an aging treatment of 120 °C/24 h + 170 °C/1 h + 120 °C/24 h. Under the aging state, the precipitated phases inside the grains are suitable in size, while on the grain boundary distribute discontinuously and the precipitate-free zone is obvious. Besides, the alloy still maintain high tensile properties. The yield strength, tensile strength and elongation are 650 MPa, 686 MPa,12.0%, respectively. The yield strength retention after heat exposure is 92%. The alloy has good corrosion resistance and the exfoliation corrosion degree. The average corrosion rate in the H_2S and CO_2 environment is 0.0024 mm/a, which is far less than the required 0.12 mm/a. It is insensitive to H_2S and CO_2 environments.     

齐次核的Hilbert型多重级数不等式取最佳常数因子的等价条件及应用

利用实分析技巧和权函数方法, 讨论具有齐次核的多重级数Hilbert型不等式, 得到了其取最佳常数因子的充分必要条件, 并给出其应用.     

凋亡抑制蛋白与肿瘤关系的研究

凋亡抑制蛋白(inhibitor of apoptosis proteins,IAPs)可以作为癌症诊断和治疗的靶点,在肿瘤研究方面备受关注,就凋亡抑制蛋白的结构、功能、在肿瘤中的表达与肿瘤的关系等研究进展作一综述,为凋亡抑制蛋白的研究提供信息和思路.     

页岩气低伤害超临界CO2凝胶压裂液研究

针对常规水压裂液会对页岩造成伤害，容易产生水锁，不易返排，还造成水资源消耗和污染环境等问题，制备了低伤害二氧化碳凝胶压裂液。将自备的F2EU和F4EU增稠剂加入到超临界CO₂基液中，探究两种增稠剂的加入量对CO₂凝胶压裂液黏度的影响，综合考虑成本与效果，优选了2%的F4EU增稠剂，可将CO₂的黏度增至15.4 mPa·s。研究了温度、压力以及剪切速率对凝胶压裂液黏度的影响。实验结果表明，随着温度升高黏度总体降低，但中间出现一个短暂升高阶段；随着压力上升压裂液黏度增加；随着剪切速率的增加压裂液黏度下降，属于一种典型的剪切变稀的假塑性流体。F4EU超临界CO₂凝胶压裂液的平均伤害率为1.39%，远远小于常规压裂液对岩芯的伤害率。实验表明，F4EU超临界CO₂凝胶压裂液在页岩气压裂开采中具有良好的应用前景。     

宁波市公共自行车服务满意度评价模型构建研究

以宁波市公共自行车为例，将因子分析法与二项logistic法相结合，对采集的1 688份居民满意度有效问卷展开分析。利用因子分析法筛选出6个因子，利用二项logistic法剔除并筛选出5个有效因子构建公共自行车服务满意度评价模型，合理评估当前宁波市公共自行车服务满意度。同时，利用随机抽取并不参与建模的5%问卷样本对评价模型进行校验，以确保模型的准确性与合理性。该研究有助于合理评价当前宁波市居民对公共自行车的服务满意度，同时适用于对未来一段时间内公共自行车服务满意度的预测。     

浙江省县市综合经济实力分析

利用浙江省2005年有关统计数据,分别采用加权平均法、主成分分析法、因子分析法和聚类分析法对浙江省58个县级市、县的综合经济实力进行了综合评价和排位.其方法科学、合理.对于帮助各地区看到自己所处的位置,明确自己的经济实力提供了一个度量准则.     

不良地质条件下管道基础处理与施工

管道输送是一种较为安全的运输手段，但在不同的地质条件下的管道设计与施工有着不同的技术要求。文章介绍了在湿陷性黄土地区基处理的几种方法以及灰土及砂垫层处理方法。     

浅谈功率因数的补偿及其应用

根据我国当前电力系统运行情况，对电网无功功率补偿的必要性及通用补偿方法及其装置进行了具体阐述。     

Pilot Study on Nanofiltration Combined with Ozonation and GAC for Advanced Drinking Water Treatment

IntroductionThe conventional process for surface water treatment,which consists of flocculation, sedimentation and filtrationcurrently, had been applied inproducingdrinkingwater formany years. Although this process can remove turbidityand bacteria in surface water effectively, only about from20% to 30% of natural organic matter ( NOM) can beeliminated. When the purified water is disinfected bychlorination, these NOMs may react with chlorine. As aresult some dis…     

建筑物地基处理的设计与施工探讨

以具体工程为例，介绍了建筑物地基处理的设计、施工中遵循的原则，施工中遇到特殊情况时采取的处理方法和必要的检测方法，对几种桩基的设计要求、施工工艺及过程、质量控制等情况进行了简单阐述。