锭子弹性管的刚度计算及其对动态性能的影响

首先推导了纺纱锭子中开螺旋槽弹性管的等效抗弯刚度及底部刚度系数的计算公式，分析了弹性管各参数对其刚度及振动性能的影响，并进行了模态测试，实验值与计算值基本一致。     

THE PRACTICE OF ACRYLIC SIROSPUN YARN ON THE SEMI WORSTED SPINNING FRAME

The technique of sirospun process is applied on a modified semi-worsted balloonless spinningframe to investigate the effect of spindle-speed,yarn-twist and strand-spacing on yarn properties.Yarn breaking strength,breaking extension,evenness and imperfection are examined on the basisof CCD experimental design.Yarn hairiness is particularly concerned,being found that all spinningparameters tested have significant effects on hairiness and that the minimum number of hairs oc-curs at the strand-spacing of 14.4 mm.Compared to conventional single spun yarn,experimentshave revealed the greatest advantage of using sirospun process is that all sirospun yarns have muchless hairiness.A new sirospun yarn fault,so called“loop”,has also been examined.The most likely cause forthis yarn fault is the strand-tension unbalance between the two strands when low tension spinningis applied.Further analysis and some initial tests have been carried out in the hope of overcomingthis loop fault which is an important obstacle to the application of balloonless spinning.     

收尘极板上沉降粉尘粘结性能研究

振打清灰效果不好，严重影响电除尘器的除尘效率和使用范围，而影响振打清灰效果的最主要因素是沉降粉体的粘结力。通过建立数学模型从微观的角度推导出粉尘之间各种粘结力的理论计算公式。分析了比电阻、外加电场和粉尘含水率等因素对粉尘粘结力的影响。在实验中，模拟电除尘器中的静电场，测出在不同外加电场下粉尘粘结力的大小，定量的反应了外加电场对粉尘粘结性能的影响。     

THE INFLUENCE OF SPINNING CONDITION ON STRUCTURE & PROPERTIES OF MASS-DYED SUPERFINE PP AS-SPUN FILAMENTS

The effect of colorant additive on the rheology of PP polymer melt and the influence of spinning conditions on the crystalline and orientation structure of mass-dyed as-spun PP filament are reported. The △E~~~ value for all colored chips is higher than that of blank chip to a varying degree. The crystallinity and orientation degree of dyed PP as-spun filament decrease with increasing melt temperature, decreasing spinning speed and increasing denier per filament (dpf), while the crystallinity of dyed as-spun filament increases with the content of colorant additive as a nucleation agent.     

管道纺包芯纱的研究

本文研究了在管道纺纱机上不添加构件而进行包芯纱的纺制。分析了其包芯纱的成纱机理。观察了实际成纱的横截面,证实了棉纤维能够均匀地、完全地包覆在芯丝的周围。也对不同性质的芯丝所纺包芯纱的结构作了观察,并对不同成纱的性质随速度增加而变化的规律作了研究。     

椭圆柱及旋转椭球导体面的静电张力探讨

文章基于一定平面与椭圆柱、椭球的截痕均为椭圆的性质和边值问题的唯一性定理,给出了一种计算一类导体静电表面张力的简捷方法:几何归类解法,规避了引用广义坐标和进行保角变换;同时,通过深入的探讨而指出了在静电表面张力分析中存在的误解和定势思维障碍。     

NiAl金属间化合物熔体旋转法制备工艺参数研究

研究了金属间化合物快速凝固薄带的成型过程和影响薄带质量的工艺参数。提出了熔体在喷嘴处进行层流流动的经验关系式，给出了金属间化合物快速凝固薄带制备的最佳工艺参数。     

二十一世纪纺纱工程展望

二十一世纪,一些相关高新技术的发展和应用,将对传统工程产生巨大的影响和推动。文章在此基础上,对新世纪前半叶纺纱技术、纺纱设备以及纺纱工厂自动化的发展进行了展望。     

喷丝头组合花板的真空熔炼

化纤生产行业的粘胶，经过装在组合花板上的喷丝头在酸浴里形成化学纤维。粘胶为碱性物质，酸浴的化学成份为稀硫酸、磷酸，酸浴温度为57℃左右，组合花板内压力为10kg／cm^2，要求组合花板材料在有足够的强度下，具有高耐腐蚀性能。     

静电像管均方根半径的计算及像质评价

探讨在电子光学成像系统中像评定的一种途径。方法,从静电这像差均方根理论出发,追迹计算大量空间轨迹的落点及系统均根半径,并由此衍算成弦财制传递函数。