海上电泵结蜡井热循环洗井工艺参数优化设计

为探索海上油田电泵举升结蜡井热循环洗井工艺井筒温度场分布规律，综合考虑潜油电机增温、电缆散热、热流体注入量、注入深度、注入温度、结蜡管段传热和海水空气导热的影响，基于热能守恒原理，建立了电泵井结蜡热循环洗井工艺井筒温度场计算模型，分析了热流体注入温度和注入量对混合产出流体的井筒温度分布的影响。研究结果表明，随着注入量的增加混合产出液沿程井筒温度增加，随着注入温度的增加混合产出液沿程井筒温度增加。该方法可有效指导现场措施工艺的实施，达到延长结蜡井的清蜡周期、延缓产液/产油量下降速度的目的。     

Evolution of ferronickel particles during the reduction of low-grade saprolitic laterite nickel ore by coal in the temperature range of 900–1250℃with the addition of CaO–CaF2–H3BO3

The method of producing ferronickel at low temperature(1250–1400℃)has been applied since the 1950s at Nippon Yakin Kogyo,Oheyama Works,Japan.Limestone was used as an additive to adjust the slag composition for lowering the slag melting point.The ferronickel product was recovered by means of a magnetic separator from semi-molten slag and metal after water quenching.To increase the efficiency of magnetic separation,a large particle size of ferronickel is desired.Therefore,in this study,the influences of CaO,CaF₂,and H₃BO₃ additives on the evolution of ferronickel particle at≤1250℃were investigated.The experiments were conducted at 900–1250℃with the addition of CaO,CaF₂,and H₃BO₃.The reduction processes were carried out in a horizontal tube furnace for 2 h under argon atmosphere.At 1250℃,with the CaO addition of 10 wt%of the ore weight,ferronickel particles with size of 20μm were obtained.The ferronickel particle size increased to 165μm by adding 10 wt%CaO and 10 wt%CaF₂.The addition of boric acid further increased the ferronickel particle size to 376μm,as shown by the experiments with the addition of 10 wt%CaO,10 wt%CaF₂,and 10 wt%H₃BO₃.     

稻砂土吸附铜镍铅砷能力的比较

通过对砂壤水稻土中Cu,Ni,Pb,As4种元素的单元及复合吸附试验,表明其吸附热力学符合Freundlich方程,吸附能力为Pb Cu>As>Ni.共存元素对土壤吸附某一元素的能力影响不大;用Langmuir方程粗略地估算出这4种元素在土壤中的化学容量.     

福州盆地南北港冲淤规律与洪涝灾害对策

本文探讨了福州盆地南北港冲淤规律，近年来北港洪水分流量呈上升趋势，洪峰对北港的压力加大，文中还对福州城防洪涝灾害的措施等方面作了研究。     

Electrochemical Preparation of WO_3 Nanowire Arrays

1 Results Ordered WO3 nanowires arrays have been fabricated by electrochemical deposition with anodic aluminum oxide (AAO) templates and annealing the W nanowire arrays in air at 400 ℃. The morphology and the chemical composition of WO3 nanowires arrays were characterized by Scanning Electron Microscopy (SEM),Transmission Electron Microscopy (TEM), X-ray Photoelectron Spectroscopy (XPS), and X-ray diffraction (XRD). The results show that the diameters of the WO3 nanowires are about 90 nm, which is in go...     

Electrocatalytic Oxidation of H_2 O_ 2 at a Carbon Paste Electrode Modified with a Nickel (Ⅱ)-5,11,17,23-Tetra-Tert-Butyl-25,27-Bis(Diethylcarbamoylmethoxy)Calix[4] Arene Complex and Its Application

0　IntroductionThegreatimportanceofnickelelectrochemistryinalkalinemedium ,especiallyforpotentialapplication ,hasattractedmuchattetionofresearcherseithertostudythebehaviorofnickel basedelectrodeitselforitsactivitytowardsothermolecules.Manyreportsshowedthatthenickelbasedelectrodeshaveelectro catalyticactivityforreactionsofappliedinterest,suchaselectro chemicaldeterminationofantioxidantsinfood[1 ] ,detectionofni tricoxide (NO )insolution[2 ] ,electrocatalyticoxidationofmethanol[1 ] ,alcohol[3] ,…     

催化裂解法制备螺旋状碳纳米管的实验研究

在硅片上用直流溅射镀铁的方法制备催化剂 ,通过乙炔在 70 0°C下催化裂解制备碳纳米管 .对热解产物进行了扫描电镜观察和 X射线衍射测试 .本文通过对有氢气预处理和没有氢气预处理两种情况下催化裂解法制备的碳纳米管的形貌、管径大小等性质的研究 ,来初步揭示螺旋状碳纳米管的生长机理 .     

化学镀镍过程中金属基体的引发催化特性研究

通过电位-时间曲线的特征,研究了化学镀镍反应初期不同基体材料的催化特征.在同质基体上可以瞬间诱发化学镀反应,而在异质基体上的诱导期因镀液组成不同而发生变化.在异质基体材料中,Pt无催化活性,Pd的诱发时间最长.     

高功率型镍氢电池的循环性能

由于没有镉污染,对环境友好,用于高功率设备的镍氢电池的需求量增长很快,目前每年的需求量约为5亿只.但是镍氢电池的一些性能还不能完全满足电动工具的使用要求,突出表现在电池大电流充放循环寿命较差.因此,研制高性能的高倍率镍氢电池不仅具有重要的研究意义,也有很大的应用价值.本文研究影响SC型动力电池循环寿命衰减的主要因素,测量了在大电流循环过程中镍氢电池的内阻、温度及重量变化,并运用SEM、XRD对电池内阻升高的原因进行了分析.我们认为电池内阻升高是镍氢电池大电流循环寿命差的主要原因,分析发现在镍氢电池进行大电流充放电循环时,电池正极膨胀,负极微粉化,电池内部孔隙率增加,致使电解液干涸,电池内阻升高.通过增加负极容量,抑制正极膨胀,可以有效改进镍氢电池大电流充放时的循环性能.     

NiTi合金表面氧化对镍离子释放的影响

采用原子吸收分光光度计,分别测试经机械抛光和高温氧化后的NiTi合金样品在人体生理模拟液中镍离子的释放速度,结果表明NiTi合金表面氧化膜的形成可以有效地减少镍离子的溶出.