动量策略及反向策略研究评述

对动量策略与反向策略的热点研究领域——异常收益的来源做了重点评述;对如何建立输家组合与赢家组合的几种方法进行了分析,并指出了优缺点。最后,对动量效应微观机制的研究进展作了介绍,并对将来的研究进行了展望。     

标枪最后用力影响因素的研究

运用运动生物力学理论，对标枪最后用力影响因素进行分析。结果表明，要提高标枪成绩，重点应放在右腿及时地发力，左腿有力的制动，这可直接影响动量传递效果。     

Internal interactions within the human circadian system: the masking effect

Summary In the realm of human circadian rhythms, the masking effect is defined as the change in the course of deep body temperature induced by changes in the degree of physical activity, or by the alteration between sleep and wake. This effect is particularly obvious during internal desynchronization where the rhythms of deep body temperature, and the sleep-wake sleep-wake sleep cycle — i.e. one of the masking factors — run with different periods.Every sleep onset is accompanied by a rapid drop, and wake onset by a rapid rise in deep body temperature, each one with an overshoot of about 50% of the steady state variations. When rhythms are calculated, with the dominant temperature period as the screening period, exclusively from data obtained during sleep episodes, on the one hand, and from those obtained exclusively during wake, on the other, two average cycles emerge: the sleep temperature curve and the wake temperature curve. Both run in parallel but are separated by the masking effcct. As derived from many experiments, the mean masking effect amounts to 0.28±0.06°C. The masking effect also depends to some extent on the phase of the temperature rhtthm; it is larger than average around the temperature maximum and during the descending phase of the temperature cycle, where the alertness commonly is highest and the probability to sleep, in general, and the REM sleep propensity, in particular, are smaller than average. This also can be interpreted to indicate that the sleep temperature curve is phase advanced relative to the wake temperature curve; this, on the average, by 0.9±0.3 h.If the individually determined amount of masking is added to the temperature data obtained during sleep, or substracted from the temperature data obtained during wake, a temperature curve emerges that can be though of as being purified of the masking effect. Analyses of this artificial curve allow estimation of that part of the internal interactions uninfluenced by the masking effect. On the average, about half of the amount of interaction between the rhythm of sleep-wake and that of deep body temperature is explained by the masking effect, whereas the other half is oscillatory interaction. Both types of interaction are inherent and inseparable parts of the circadian clock mechanism, as can be deduced from model considerations.     

自动网格体系在柱体绕流大涡模拟中的适用性评估

为了评估基于snappyHexMesh方法生成的自动网格体系在二维柱体绕流大涡模拟中的适用性,比较了该自动网格体系与人工网格体系对于Re为3 900圆柱绕流和Re为22 000方柱绕流的数值模拟结果。通过设置合理的计算域以及数值格式,采用snappyHexMesh自动网格以及人工网格的算例都表现出良好的数值稳定性。将不同网格体系的数值模拟结果与物理试验结果进行对比,结果表明,采用snappyHexMesh网格可以提高数值求解效率;圆柱绕流对网格体系的变化比较敏感,不同密度的snappyHexMesh网格会显著影响圆柱气动力特征以及尾流区域的流场结果;snappyHexMesh网格体系可以准确预测方柱绕流,在方柱绕流大涡模拟中具有相较于圆柱绕流更好的适用性。     

等衰落轨道角动量索引调制系统的信道容量性能分析

射频轨道角动量(orbital angular momentum,OAM)提供了一种可以在同一载波频率物理信道上复用一组正交模式以提高信道容量的方法。现有研究大多专注于信道容量提升,对系统复杂度的研究相对较少。在基于均匀圆形阵列(uniform circular array,UCA)的OAM通信系统中,发射机需要完成大量调制运算以生成OAM信号。于是,提出了一种等衰落轨道角动量索引调制(equal fading orbital angular momentum index modulation,EOAM-IM)方案,其中,IM有效降低了OAM调制运算复杂度,且等衰落发射机也保证了不同模式OAM子信道传输增益。此外,还详细推导了所提EOAM-IM方案的系统信道容量。仿真结果表明,所提EOAM-IM方案能以更低的调制复杂度获得比传统OAM方案更高的信道容量。     

坐标动量几率相关分布的辛普森法研究

用辛普森法研究了不同体系的粒子在动量空间和坐标空间的几率分布的相关性及坐标和动量的分布宽度之积与宽度内所含几率的关系。     

前向多翼离心风机叶片尾迹和蜗壳二次流动的试验研究

对前向多翼式离心风机建立了性能及流场测试台位 性能试验及流场测试表明,性能试验重复性良好,曲线符合理论性能曲线.用粒子图像速度场仪技术对叶片尾迹区及蜗壳出口横截面上的二次流做了详细的变工况测量与分析.结果表明:叶片尾迹区脉动强度达20%～70%;在设计工况附近叶片尾迹影响区域小,在非设计工况下叶片尾迹影响区域大,尾迹区域占到蜗壳径向宽度的15%～25%,约是叶片弦高的2～3倍;在蜗壳横截面上明显存在二次流旋涡;沿着蜗壳旋出方向二次流对称分布,但是到达出口时,小流量下两侧旋涡结合成一个旋涡,大流量下两侧旋涡一直保持到蜗壳出口.     

对力的一种新定义的质疑

通过对一种力的新定义的分析,说明新定义的不足及与此相关的需要进一步研究的问题.     

瞬时冲力历时数据的处理及程序实现

提出了一种对碰撞过程冲力采样数据进行处理的方法及处理程序,通过对实验数据的分析,给出了从数据文本中搜索有效冲力数据的途径.该方法结合冲力瞬态数字测量仪和普通计算机系统,可用于广泛的力学测量研究中.     

单桨船螺旋桨安装位置确定

通过船模螺旋桨在3个不同安装位置的自航试验，探讨了螺旋桨位置对推进效率的影响，试验结果表明，选择合适的螺旋奖位置，有利于提高舵的整流作用，改善船后伴流分布，减小推力减额，从而提高推进效率，达到船舶节能的目的，作为一个典型试验的结果，在0.1D(D为螺旋桨直径）范围内移动螺旋桨，在航速上可获得3％－5％的增量，因此，在船舶设计中有必要重视螺旋桨安装位置的选择。