FeCo-based hybrid MOF derived active species for effective oxygen evolution

Metal-organic frameworks(MOFs) have been regarded as promising catalyst materials due to the richness of coordinately unsaturated metal sites on the surface,which can act as catalytic active centres.In this study,a hybrid MOF material composed of Fe-based MOF and Co-based MOF was prepared with the involvement of graphene oxide nanosheets as additive.It was demonstrated that the hybrid MOF materials showed much higher electro-catalytic activity towards oxygen evolution than the single-phase counterparts.To drive current density of 10 mA cm~(-2),the hybrid CoFe-based MOF only needed an over potential of 290 mV in 1 M KOH.The catalytic activity could sustain for a longer time with only slight current density decrease.During oxygen evolution operation,the MOF catalyst evolved into catalytic active species but kept well the microscale sheet-like structure.It is thus believed that this study will provide an avenue for the development of advanced electrocatalysts.     

Acyl-chloride functionalized graphene oxide chemically grafted with hindered phenol and its application in anti-degradation of polypropylene

In this study,graphene oxide (GO) nanosheets were first functionalized by the acyl-chloride reaction and then reacted with hindered phenol (HP) to obtain HP grafted GO (GO-g-HP).The GO-g-HP prepared under the optimized condition exhibited a high efficiency against both thermal and photo oxidation of isotactic polypropylene (iPP).GO-g-HP exhibited a much better anti-aging efficiency than that of HP and GO used individually or that of their physical mixture.The outstanding anti-aging effect of GO-g-HP was attributed to the excellent synergistic effect produced between the chemically bonded GO and HP,which resulted in an improved oxygen barrier property of GO and excellent utilization of the free radical scavenging capability of GO and HP.Also,thanks to the grafting of HP on GO,the physical loss of HP,which was one of the main shortcomings for traditional small molecular antioxidants,was largely suppressed.It is expected that the GO-g-HP prepared can well meet the requirement of long-term applications of polymers in some harsh service conditions.     

Polarized Emission of Molecular Film With Lanthanide (Ⅲ) Complex

1 Results In the coordination system by using complexation with organic ligand, the ff emission of lanthanide(Ⅲ) (Ln(Ⅲ)) is induced the excitation energy transfer form the organic chromophore under the light-irradiation. However, there are not so much number of reports to discuss the energy relaxation mechanism in such complexes with Ln(Ⅲ). Recently, we succeeded firstly to estimate the rate constant of the energy transfer between the ligand and Ln(Ⅲ) in Pr(Ⅲ)-phenanthroline analogs[1]. Here, we will di...     

新型纳米纤维膜对地下水中重金属的过滤去除研究

采用扫描电镜表征了氯化聚氯乙烯静电纺丝纳米纤维膜的微观结构特征,并进行了去除地下水中铜、铅、镉等重金属阳离子的过滤试验,包括直接过滤、加土壤过滤、加硅藻土过滤和胶束强化过滤。结果表明,最佳的过滤工艺是胶束强化过滤,其最佳试验条件是10层膜过滤和5mmol/L的SDBS浓度,对铜、铅、镉的去除率分别超过73%,82%和91%。     

工程中常用的几种氧化沟及其发展

简要介绍了当今工程中常用的几种氧化沟技术的特点及其发展历程,主要包括Carrousel氧化沟、Orbal氧化沟、交替式氧化沟以及一体化氧化沟。     

羧基淀粉的制备及其吸附性能的研究

本文研究羧基淀粉的制备条件与吸附重金属离子的容量关系,并研究它的使用条件和性能。     

pH、温度和浓度对苯酚在V掺杂MoOx-C/Ti电极上的电催化氧化的影响

采用溶胶-凝胶法合成MoOx、MoOx-V5 (x%)胶体,通过Vulcan XC-72炭黑负载制备炭载钼系氧化物电催化剂.利用循环伏安法(CV)测试手段研究苯酚在电极上的氧化降解,考察了掺杂元素、溶液pH值、苯酚浓度、扫描速率、温度对苯酚氧化性能的影响.测试结果表明:苯酚在电极上的氧化是受扩散和电子转移联合控制的复杂过程;掺杂过渡金属元素V可以降低苯酚氧化的表观活化能,提高电化学性能;溶液的pH值越低,MoOx-C/Ti电极对苯酚的催化氧化活性越高;pH在0～6,苯酚的氧化经历了相似的历程,包含了相同的电子数和质子数;苯酚氧化峰电流随着浓度、温度的增加而增加,到一定程度后趋于稳定.     

液态金属压铸机的实时压射控制系统

为了满足压铸工艺的要求，有必要进行压射机构的改造并对压射实施自动控制．为此，研究了液态金属压铸机压射结构的重新设计及其实时控制，设计了一套对压射进行实时控制的系统，着重研究了该系统的组成、基本原理及其特点．     

选择性催化氧化H2S的催化剂研究

在考察了几种单组分氧化物把硫化氢催化氧化为单质硫的基础上，采用共沉淀法合成了3种复合氧化物催化剂A，B，C，并考察了它们的催化活性和选择性．结果表明，在一定条件下，催化剂B的转化率和选择性分别在90％和97％以上，在40h的催化性能稳定性测试中，其转化率和选择性均能保持稳定，具有良好的催化性能．     

高功率型镍氢电池的循环性能

由于没有镉污染,对环境友好,用于高功率设备的镍氢电池的需求量增长很快,目前每年的需求量约为5亿只.但是镍氢电池的一些性能还不能完全满足电动工具的使用要求,突出表现在电池大电流充放循环寿命较差.因此,研制高性能的高倍率镍氢电池不仅具有重要的研究意义,也有很大的应用价值.本文研究影响SC型动力电池循环寿命衰减的主要因素,测量了在大电流循环过程中镍氢电池的内阻、温度及重量变化,并运用SEM、XRD对电池内阻升高的原因进行了分析.我们认为电池内阻升高是镍氢电池大电流循环寿命差的主要原因,分析发现在镍氢电池进行大电流充放电循环时,电池正极膨胀,负极微粉化,电池内部孔隙率增加,致使电解液干涸,电池内阻升高.通过增加负极容量,抑制正极膨胀,可以有效改进镍氢电池大电流充放时的循环性能.