强直电流伸展弧CVD硬质合金金刚石涂层工具

采用自行研制的强电流直流扩展电弧设备对酸浸和渗硼预处理的YG6刀片进行了金刚石薄膜涂层沉积，并对放于不同位置的沉积刀片表面涂层的激光Raman谱和SEM形貌进行了分析、研究。结果表明：渗硼预处理工艺优于酸浸预处理工艺；在渗硼处理的GY6刀片上，沉积的金刚石薄膜涂层具有大面积、均匀性好和质量高的特点。     

冲击压实机在商开高速公路中的试验及应用

结合商丘至开封高速公路介绍了冲击压实机的试验工艺、结果及应用.     

Fabrication and Application of High Quality Diamond-coated Tools

Diamond-coated tools were fabricated using Co-cemented carbide inserts as substrates by the electronically aided hot filament chemical vapor deposition (EACVD). An amount of additive in an acid solution was used to promote the Co etching of the substrate surface. The surface of the WC-Co substrate was decarburized by microwave plasma with Ar-H 2 gas. Effect of the new substrate pretreatment on the adhesion of diamond films was investigated. A boron-doped solution was brushed on the tool surface to diffuse ...     

基于小波包能量特征的滚动轴承故障监测方法

对滚动轴承的故障特点进行分析，根据小波包变换能将信号按任意时频分辨率分解到不同频段的特性，提出了小波包能量特征的概念及算法，并给出两个仿真算例，然后将小波包能量特征与径向基函数网络相结合，提出了一种新的滚动轴承故障诊断方法，数字仿真实验证实了该方法的正确性和有效性。     

浅谈土工格栅填石路堤质量控制

通过汾柳高速公路土工格栅填石路堤实体工程的实践,论述了土工格栅填石路堤具体的施工工艺及质量控制办法。     

CVC轧机的应用及技术问题分析

文章主要分析了CVC轧机的板形控制原理,应用中轴向力、磨损、轧辊热凸度及设备结构等技术问题。     

板材辊式矫直机辊数研究

本文根据弹塑性弯曲理论，应用迭代法计算了板材一次弯曲矫直时的弯曲力矩和相应的反弯曲率，计算给定方案下形成的残余曲率，给出了压下量与反弯曲率的数学表达式．对于一定的矫直精度要求，提出了上排工作辊集体倾斜调整的辊式矫直机辊数的计算方法．     

WC—Co硬质合金刀片热丝法金刚石薄膜涂层附着力

用热丝法研究了ＷＣ－６％Ｃｏ硬质合金刀片金刚石薄膜涂层附着力。结果表明：采用温度为８０℃,（ＨＣｌ：ＨＮＯ３：Ｈ２Ｏ）（体积比）为１∶１∶１溶液对硬质合金刀片表面去Ｃｏ１５ｍｉｎ后,经４０ｕｍ金刚石粉及１．５ｕｍ金刚石加２０ｕｍＴａＣ混合粉进行超声预处理,结果表明,沉积的金刚石薄膜与硬质合金刀片基底具有良好的附着力,而经４０ｕｍ金刚石粉处理的薄膜涂层组织与附着力要好一些。     

Diamond synthesis from a system of chromium-carbide and Ni70Mn25Co5 alloy

In order to ascertain the mechanism of interaction between carbide and metallic catalyst and formation of diamond under high pressure and high temperature, and find a new method to synthesize diamond with special properties, it is necessary to investigate the reaction behavior of different carbides and metallic solvent_catalysts under high pressure and high temperature. A system of Cr-3C-2 powder and Ni 70Mn 25Co 5 alloy in weight ratio of 1∶6 was treated under 6 0 GPa and 1 500℃ for 20, 30 or 60 min respectively. X_ray diffraction of the samples indicated the Cr 3C 2 decomposed partially after high pressure and temperature treatment, and Cr 7C 3, Cr and diamond formed respectively. There was not any trace of graphite in the samples. The result suggested that the separated carbon atoms could form diamond directly without conversion process of graphite into diamond. The observation of SEI, WDX and EDX also showed that diamond crystals were synthesized in the system, which have perfect surfaces and shapes, with the average grain size of about 40 μm. The properties of the crystals are being investigated.     

用参数变换方法研究—族钻石分形晶格上Ising模型的相变

采用英国著名学者Stinchcombe提出的理论方法——参数变换，研究了一族钻石分形晶格上Ising模型的相变和临界性质，结果表明：与实空间部分格点消约(decimation)RG变换的结果完全一致．这似乎暗示着用该方法精确求解其他等级晶格上的离散自旋模型是有效的．