The detection of structural deformation errors in attitude determination

In the determination of the attitude parameters from a multi-antenna GPS array, one of the major assumptions is that the body frame is rigid at all times. If this assumption is not true then the derived attitude parameters will be in error. It is well known that in airborne platforms the wings often experience some displacement during flight, especially during periods of initializing maneouvres, such as taking off, landing,and banking. Often it is at these points in time that it is most critical to have the most precise attitude parameters.There are a number of techniques available for the detection of modeling errors.The CUSUM algorithm has successfully been implemented in the past to detect small persistent changes. In this paper the authors investigate different methods of generating the residuals, to be tested by the CUSUM algorithm, in an effort to determine which technique is best suited for the detection of structural deformation of an airborne platform. The methods investigated include monitoring the mean of the residuals generated from the difference between the known body frame coordinates, and those calculated from the derived attitude parameters. The generated residuals are then passed to a CUSUM algorithm to detect any small persistent changes. An alternative method involves transforming the generated residuals into the frequency domain through the use of the Fast Fourier Transform. The CUSUM algorithm is then used to detect any frequency changes. The final technique investigated involves transforming the generated residuals using the Haar wavelet. The wavelet coefficients are then monitored by the CUSUM algorithm in order to detect any significant change to the rigidity of the body frame.Detecting structural deformation, and quantifying the degree of deformation, during flight will ensure that these effects can be removed from the system, thus ensuring the most precise and reliable attitude parameter solutions. This paper, through a series ofsimulations, will assess the effectiveness of the above mentioned techniques for detecting structural deformation effects on a GPS multi-antenna array. These principles are then tested with experimental data.     

积分中值定理刍议

文章从积分中值定理的几何特征出发,对该定理作了一点补充说明,并通过实例进一步验证了这种改进的优点。     

波纹管的特征值分析

基于Novozhilov薄壳理论 ,用有限元法建立了旋转波纹管非轴对称自由振动的广义特征值方程并进行了求解。选取两结点非协调曲边旋转壳单元作为波纹管的离散单元 ,并将所有相关变量沿其环向进行了Fourier展开。该方法不仅给出了子午线曲率连续变化的U型波纹管任意环向谐波所对应的特征值 ,而且对子午线曲率有突变的C型波纹管旋转壳也能很好地适应。算例结果表明 ,波纹管不存在一个最低固有频率对应的固定环向波数 ,但其轴对称振型和低阶非轴对称振型在动态分析中占绝对优势 ,高阶振型的作用并不明显。     

R.C.曲线交叉粱系双目标优化设计的研究

本文对R.C正交直线-曲线粱系进行双目标优化设计,取结构造价和钢筋用量两类指标构造目标函数,建立了此类结构的基于Pareto最优性准则的数学模型,并对“线性加权和算法”进行改进,由此求得的综合最优解与一般算法的解答基本重合,而迭代计算的工作量却显著减少。对数值计算结果进行分析、讨论,得出一些比单目标优化设计更有理论和实际意义的结论。     

夹层曲板在均匀轴向压缩下的稳定性

研究四边简支具有不等厚度表层的３层夹层曲板在均匀轴向压缩下的稳定性问题。方法采用广义变分原理和布勃诺夫－伽辽金法。     

采用触发测头进行曲面自动跟踪测量

介绍触发测头的工作特点,并提出一种新的采用触发测头进行曲面自动跟踪测量的方法,该方法采集速度快,精度高,可以应用在数控机床上实现工件的数字化采集,尤其适用于薄壁受易变形工件的数据采集。     

前向多翼离心风机叶片尾迹和蜗壳二次流动的试验研究

对前向多翼式离心风机建立了性能及流场测试台位 性能试验及流场测试表明,性能试验重复性良好,曲线符合理论性能曲线.用粒子图像速度场仪技术对叶片尾迹区及蜗壳出口横截面上的二次流做了详细的变工况测量与分析.结果表明:叶片尾迹区脉动强度达20%～70%;在设计工况附近叶片尾迹影响区域小,在非设计工况下叶片尾迹影响区域大,尾迹区域占到蜗壳径向宽度的15%～25%,约是叶片弦高的2～3倍;在蜗壳横截面上明显存在二次流旋涡;沿着蜗壳旋出方向二次流对称分布,但是到达出口时,小流量下两侧旋涡结合成一个旋涡,大流量下两侧旋涡一直保持到蜗壳出口.     

扭矩对三维空间圆截面曲杆弹性屈曲的影响

采用自然坐标系,由Green应变张量的定义,给出了自然坐标形式的三维细长空间曲杆的Green应变计算公式,建立了同时考虑轴向压力和扭矩影响的能量变分方程.采用2节点12个自由度的自然坐标形式的三维空间曲梁单元,采用线性特征值分析方法,研究分析了同时受轴向压力和扭矩作用的具有初始曲率和挠率的三维空间杆柱的屈曲问题.数值结果与存在的理论解极为吻合,验证了公式的正确性.更为引人注意的是:不论直杆还是曲杆,扭矩对它们的弹性屈曲影响不可不计.     

最小二乘法在普通物理实验中的应用

用最小二乘法来处理普通物理实验数据和拟合曲线,此项工作涉及到大量的计算,若以手工计算会更加烦琐,但如果借助计算机编程计算,则处理的速度就会大大地加快,使得问题简单化.     

NURBS曲面造型方法

列举了基于NURBS方法的各种曲面造型方法和相应的数学表达式，同时也对各种方法的适用范围和优缺点进行了评述。