Microstructure,mechanical properties and wear resistance of an Al–Mg–Si alloy produced by equal channel angular pressing

Microstructure, mechanical properties and wear resistance in an ultrafine-grained Al–Mg–Si alloy fabricated utilizing a combination of equal channel angular pressing (ECAP) and dynamic aging were investigated in this paper. The results indicated that the grain size of the ECAP alloy was significantly refined, i.e., to ~239 nm after three ECAP passes. Meanwhile, the yield and tensile strength of the ECAPed material reached 340 MPa and 445 MPa, respectively, while maintaining a significant uniform elongation of 14%. Wear resistance results demonstrated that the wear rate, wear depth and width of the ECAPed material decreased in comparison with the solution-treated (SST) and peak-aged (T6) conditions under a load range of 5–25 N. The adhesive wear that occurs in the undeformed specimens at 10 N does not appear in the ECAPed specimen at the same load, indicating that the ECAPed specimen delay the appearance of more serious wear mechanisms under certain loads. The cooperative interaction of high density nano-scale β" precipitates and dislocations resulted in a combination of super-high strength and good work hardening ability which suppressed the extension of cracks between the friction layer and the plastic deformation zone. As a consequence, the combination of ECAP and dynamic aging brings a significant improvement for antifriction performance of the 6061 aluminum alloy.     

Effect of heat treatment on microstructures and properties of a novel Al-Zn-Mg-Cu alloy for oil drilling

In view of the special requirements for strength, heat resistance and corrosion resistance of Al-Zn-Mg-Cu alloy for oil drilling, the Al-6.2 Zn-2.5 Mg-1.6 Cu alloy was prepared by increasing Cu content on basis of Russian Series 1953 alloy. The effect of heat treatment on the microstructures and properties of the alloy was characterized by optical microscope(OM), scanning electron microscope(SEM) and transmission electron microscope(TEM), and investigated by tensile test at room temperature, thermal exposure test and corrosion test. The results show that the strength after T6 aging treatment exhibit a decrease trend as an increase of the solution temperature from465 °C to 480 °C. After the solution treated by the rate of 470 °C/1 h, second phases dissolve into the matrix very well and the strength property reaches optimum. The alloy has better comprehensive properties treated by a solution treatment of 470 °C/1 h and then followed by an aging treatment of 120 °C/24 h + 170 °C/1 h + 120 °C/24 h. Under the aging state, the precipitated phases inside the grains are suitable in size, while on the grain boundary distribute discontinuously and the precipitate-free zone is obvious. Besides, the alloy still maintain high tensile properties. The yield strength, tensile strength and elongation are 650 MPa, 686 MPa,12.0%, respectively. The yield strength retention after heat exposure is 92%. The alloy has good corrosion resistance and the exfoliation corrosion degree. The average corrosion rate in the H_2S and CO_2 environment is 0.0024 mm/a, which is far less than the required 0.12 mm/a. It is insensitive to H_2S and CO_2 environments.     

基于Sinc插值与相关谱的纵横波速度比扫描方法

在多分量地震技术中，准确地求取出纵、横波速比（γ）是多分量资料处理、反演、解释各环节中的一个重要步骤。由于地下同一层位具有相同的波阻抗比，因此该层位的反射纵波和反射转换波相互关联，纵横波速比与时间比存在相互转化关系。基于Sinc插值算法与相关系数谱分析的纵横波速比扫描方法是通过设置一系列γ，利用Sinc插值算法将纵波拉伸后与转换波进行互相关，当互相关系数达到最大时即可求出相应的γ。理论数据和实际资料的测试，验证了该方法的有效性、准确性和实用性。     

中国大气颗粒物污染与致癌研究进展

 室外空气污染和污染空气中的颗粒物是一类致癌物，而近年中国的大气颗粒物污染仍然维持在较高浓度水平。通过综述中国近年大气颗粒物污染现状和开展的颗粒物致癌机制研究，分析中国研究中颗粒物有关实验动物致癌性的证据和颗粒物致癌的人群流行病学线索，阐述大气颗粒物与癌症的关系，提出中国亟需开展相关研究。     

带有临界增长的Kirchhoff方程极小能量变号解的存在性

为了深入研究Kirchhoff方程的性质,讨论了带有Hartree项和临界增长非线性项的Kirchhoff方程极小能量变号解的存在性。利用能量泛函在变号Nehari流形上的下确界C_λ收敛于0,得到空间E紧嵌入L~6(R~3)这一技术性结果。结果表明,利用限制变分方法和定量形变引理获得极小化序列对应的极小值点是该问题的非平凡解。研究方法在理论证明方面得到了良好的结果,对研究其他Kirchhoff方程解的存在性有一定的指导意义。     

智能高速罐身电阻焊机数字化控制系统

提出了以国产MCT80 0 0F8运动控制器为核心的智能高速罐身电阻焊机数字化控制系统 ,并介绍了系统的组成、工作原理、硬件接口、电机控制方法以及伺服电机的运动关系数学模型 .新的系统有利于提高罐身电阻焊机的制罐生产速度 ,并具有功能全面、可靠性高、控制精确、开放性好以及成本较低等优点     

超临界水氧化处理有机物废料的新技术

和传统方法相比，超临界水氧化处理有机物废料有着极大的优势。介绍了处理废料的原理和工业应用的可能性。     

NIPA类共聚温敏水凝胶中水的状态和耐热性

用N-异丙基丙烯酰胺（NIPA）与丙烯酸钠（SA）及甲基丙烯酸钠（SMA）共聚合成了两个系列的水凝胶，研究了共聚组成与水凝胶基本性质的关系，并用示差扫描量热法（DSC）和热失重法（TG）研究了此类水凝胶中水的状态和耐热性。     

风能地板辐射采暖系统

随着经济快速发展,化石燃料已被大量开发和使用,一方面人类面临能源日渐匮乏的危机,另一方面能源大量浪费也引起全球环境问题.本文以环保和节能为目标,提出一种综合利用风力发电技术、热泵技术和低温地板辐射采暖技术的新型采暖模式,对使用可再生风能进行采暖,进行了可行性探讨.     

锭子弹性管的刚度计算及其对动态性能的影响

首先推导了纺纱锭子中开螺旋槽弹性管的等效抗弯刚度及底部刚度系数的计算公式，分析了弹性管各参数对其刚度及振动性能的影响，并进行了模态测试，实验值与计算值基本一致。