Choroidal and iris angioarchitecture of the newt: A scanning electron-microscopic study of vascular corrosion casts

The corrosion cast technique provided for the first time an excellent three-dimensional visualization of the vascular pattern of the choroid and iris in the newt eye. The results show the presence of a single arterial afference to the choroidal and iris capillaries: the ophthalmic artery is the origin fo both ciliary arteries and the long posterior ciliary artery. Slightly behind the equatorial circumference of the eyeball the venous drainage consists of a single vessel on the dorsal side and two distinct vessels on the ventral one. It receives blood from both iris and choroid. The surface of the plastic endocasts shows some details of fine luminal structures of the endothelial cells. Shallow depressions may be regarded as imprints of endothelial cell nuclei, and they are distinctly different for arteries and capillaries. The angioarchitecture of the newt eye differs from that of brain in that hairpin-shaped capillary loops are not observed at all.     

磁化合成铁氧体催化机理的探讨

本文用磁化合成法制取了一种新型高效铁氧体催化剂,用高分辨分析电镜,测定了其晶体结构、化学组成和原子级的显微形貌;提出了一种催化机制的新见解和一个研制催化剂的新方法.     

吉木萨尔陆相页岩油微观赋存类型

为了更好地认识页岩油微观赋存状态及类型,避免实验过程中水钻取样对原油分布的影响,选取吉木萨尔页岩典型含油岩芯,采用全程液氮钻、切、磨制样工序,通过全能谱扫描电子显微镜、二次电子成像及背散射相结合的技术手段,获得微观储层矿物类型和结构、储集空间类型、形貌以及C, O, Si, Al, Ca, K, Na,Mg等元素在微、纳米尺度的分布。依据去除矿物因素后的C元素含量分布,判别原油在微、纳米空间尺度的富集程度。结合矿物岩石组构和储集空间形貌,对微、纳米尺度页岩油原油的赋存状态及分布类型进行直观的定量表征,并基于C元素含量推测微观含油饱和度的相对变化。针对原油与孔喉的配置关系,进行储层微观孔喉结构与原油赋存状态的表征,明确原油赋存类型。总结出研究区4种微观原油赋存类型:白云质溶蚀微米级大孔道中的可动油、砂质粒间微纳米级孔中可动油、砂质粒间孔喉壁吸附的半束缚状态的油膜以及自生黏土矿物晶间孔内束缚油。     

H-800高分辨透射电镜的开发及其在矿物研究中的应用

本文介绍了在H-800透射电镜上获取高分辨矿物晶格象和薄箔样本能谱定量分析的开发工作。用环氧树脂包埋方法和离子减薄技术,对非导体的地质样品可以制成很好的超薄样本,从而可以方便地在透射电镜上观察样品的内部超微结构和高分辨的矿物晶格象。为了采用“比例法”进行薄箔样本的x-光能谱定量分析,先用已知化学组成的矿物薄箔标样,对配在透射电镜上的能谱分析系统进行校正,求出各元素的k-系数。最后将上述方法用于对我国不同海区绿色自生矿物颗粒的研究。     

环境大气可吸入颗粒物的矿物学研究

首先介绍了可吸入颗粒物中矿物颗粒的研究意义，随后对国内外矿物颗粒的研究现状和研究方向进行了详细论述；使用X射线衍射(XRD)和带能谱的扫描电镜(SEM/EDX)对北京春季可吸入颗粒物中矿物组分进行了初步研究，结果表明，北京春季可吸入颗粒物中的矿物有石英、粘土矿物、硅铝酸盐矿物、硫酸盐矿物等，以硅铝酸盐矿物为主，同时存在新生的矿物颗粒，新生矿物的存在表明有活跃的大气化学反应发生；在研究的基础上，对今后开展矿物颗粒的研究提出了建议。     

原子力显微术对人体腰椎间盘组织超微结构的研究

报道了采用原子力显微镜对腰椎间盘组织成分的观察结果，并对胶原组织从结构上进行了分类，为深入到生物分子层次的研究提供了非常有意义的依据。     

红螯螯虾感光器Gqα的亚细胞定位

利用免疫细胞化学的方法和电镜技术观察红螯螯虾感光器中Gq蛋白α亚基的亚细胞定位,结果表明Gqα以膜结合形式定位于感杆束和以可溶性形式定位于细胞质中,Gqα定位的变化依赖于不同的光照条件.在暗适应后,Gqα主要分布于感杆束,细胞质中很少,感杆束与细胞质中胶体金颗粒的密度比为1.44±0.074;在(日)光适应后,密度比减少为0.61±0.021;在不同波长的光照处理后,Gqα定位有差异,感杆束与细胞质中胶体金颗粒的密度比由高至低,依次为绿光(1.64±0.046)、红光(1.28±0.036)、蓝光(1.16±0.111)和黄光(0.96±0.099).光调节的Gqα转位可能控制了能被视紫红质激活的Gq蛋白的数量.研究表明光波可影响感光细胞中膜结合和可溶性Gqα的比例,而这一结果可能是由被光激活的视紫红质的数量来控制的.     

聚苯胺修饰电极的制备与形貌、阻抗表征

运用循环伏安(CV)法制取聚苯胺,结合扫描电子显微镜(SEM)、阻抗谱(EIS)等手段,对聚苯胺的表面形貌及其特征进行研究,并建立了聚苯胺覆盖Pt电极的阻抗模型.实验表明,随着循环次数的增加,聚苯胺膜厚增加,而且所制得的聚苯胺膜呈现多孔、疏松的特征,符合其作为基体材料的特点.     

SEM analysis of the changes of carbon layer structure of mesocarbon microbeads heat-treated at different temperatures

Mesocarbon microbeads (MCMB) with narrow size distribution, excellent sphericity and no obvious conglutination have been prepared with a coal tar pitch containing quinoline insolubles (QI) as the raw material. Optical microscopy and scanning electron microscopy (SEM) are used to examine the structure of the MCMB. It has been found that SEM technique shows the structural information of MCMB clearly in the form of micrographs even when the structure of MCMB is complex, while the optical technique is useful for analysis of the regular structure of the mesophase spheres but cannot be effectively used to analyze either the complex structure of the green MCMB or the structures of the further heat-treated ones at different temperatures. According to the characteristics of the carbon layers, the structures of the as-prepared MCMB in the present experiment could be classified as (I) Parallel Layer type structure and (2) Bent Layer type structure with the carbon layers gathering at one or two points in the MCMB. In the experiments, SEM is also utilized to investigate the structures of MCMB that are heat-treated at different temperatures. It has been found that the MCMB without any further heat-treatment show no layered-carbons, while the ones heat-treated at temperaturehigher than 1000℃ exhibit obvious layered carbons across their sections. When increasing the heat-treatment temperature, the carbon layers become thinner and flatter.