各向同性介质与单轴晶体界面上e光波法线的折射

根据光的电矢量满足的边条件，对各向同性介质与单轴晶体界面上e光波法线的折射进行了具体的讨论，得到了确定e光波法线在单轴晶体中传播方向的公式，并对几种特殊情况进行了具体讨论。指出了由所得结果可以确定e光光线的行进方向。     

Decoration of disclinations by solidification-induced band texture and focal-conic texture for a low-molar-mass liquid crystal

Two decoration techniques, solidification-induced band texture decora tion and focal-conictexture decoration, have been established to exhibit the director field of disclinations in a low-molar-mass methacrylate liquid crystal. The disclinations with strength s = 1/2 and s = ±1 are observed by the two decor ation methods. For the solidification-induced band texture decoration, the molecular orientation is perpendicular to the direction of the band. While for focal- conictexture decoration, it has been proved by the results of IR dichroism that the direction of the director is parallel to the direction of the focal-conic. Therefore, the sketch map of the molecular director filed can be mapped according to the morphological pattern of the solidification-induced band textureor focal-conic texture.     

酸性硅溶胶沉淀法制备超微细活性白炭黑

对酸性硅溶胶沉淀法生产超微细活性白炭黑的工艺进行了研究；探讨了生产过程中硅溶胶的ｐＨ值，反应终点ｐＨ值，反应温度以及分散剂等条件；制备了较高品质的产品，其性能接近或超过国外同类产品．     

超微粒MnO_2的合成

以MnCl_2和NaOH为原料,采用胶溶法,制备了超微粒MnO_2制得的MnO_2超微粒为非晶态,直径6.0～10.0 nm,呈球状,在有机溶剂中具有良好的分散性和透明性,考察了影响氧化锰溶胶调制的因素,获得了最佳制胶条件,研究了表面活性剂用量与Mn迁移率的关系;通过X-光粉末衍射、红外光谱、热重及差热分析,研究了产品的结构性能。     

炭黑／结晶性含氟树脂合金在自控温加热电缆中应用

选择了结晶性含氟树脂添加改性剂为树脂基体，与炭黑制居复合导电体系。通过这个对体系不同条件下ＰＴＣ特性的研究，对其配方与加工工艺进行优化。并利用扫描电镜，Ｘ射线衍射，ＤＳＣ等分析测试手段，对体系的各种开矿结构进行了研究，阐明了该导电复合体系的形态结构与性能的关系。     

Microstructure transition of Al-Cu eutectic alloy during containerless rapid solidification

Droplets of Al-32.7%Cu eutectic alloy were rapidly solidified during containerless processing in a 3 m drop tube. The microstructural evolution of Al-Cu eutectic alloy depends strongly on droplet size. The eutectic growth morphology changes from regular lamellar eutectic to a kind of anomalous eutectic with the decrease in droplet size. This microstructural transition was analyzed within the current theories of eutectic growth. The results indicate that there exists a critical velocity for eutectic growth beyond which anomalous eutectic appears. The coupled zone of the Al-Cu eutectic alloy system has been calculated on the basis of the Trivedi-Magnin-Kurz(TMK) eutectic growth and the Lipton-Kurz-Trivedi(LKT)/Boettinger-Coriell-Trivedi(BCT) dendrite growth models, which provides a further interpretation for the morphological transition.     

CsLiB6O10晶体光参量振荡器的线宽分析

采用355nm脉冲激光作为泵浦源,对影响CsLiB_6O_(10)晶体光参量振荡器的信号光线宽的各种物理机制进行了数值模拟计算和分析.结果表明,泵浦光的发散角和偏轴方向对信号光线宽的影响较大。     

溶胶凝胶法制备三维规则排列大孔TiO2材料

以聚苯乙烯微球 (LatexSphere)离心后形成的三维规则排列的胶晶 (colloidcrystal)作模板 ,用钛酸丁酯、水、乙醇等配制的溶胶填充微球之间的间隙 ,然后原位形成凝胶 ,最后通过焙烧除去微球得到三维规则排列大孔TiO2 材料 (3DOM)。溶胶的浓度一般控制在 0 5～ 1 0md/L之间。焙烧过程的升温速度应控制在 5℃ /min以下。得到的样品表面可观察到五颜六色的彩光。从SEM照片可观察到 ,球形孔大小均匀 ,排列整齐 ,孔壁填充完全。孔径在 5 30nm左右 ,孔的排列呈面心立方结构 ,孔与孔之间由小孔窗相互交连。XRD表明孔壁含有锐钛矿和金红石两种晶型 ,2种晶型质量分数大约各占 5 0 %。     

(E)-3-(3,4-二甲氧基苯基)-2-氰基丙烯酸乙酯的合成和晶体结构

标题化合物C14 H15O4N(3)是由 3,4 二甲氧基苯甲醛 (1) 与氰乙酸乙酯 (2 ) 在KF/蒙脱土催化下以N ,N 二甲基甲酰胺 (DMF)作溶剂反应而得 .结构通过单晶X射线衍射分析确定 ,其晶体属于单斜晶系 ,空间群P2 1/n ,a =1.310 1(3) ,b =0 .80 32 (2 ) ,c =1.385 4 (2 )nm ,β =114 .2 1(1)° ,Mr=2 6 1.2 7,V =1.32 96 (5 )nm3 ,Dc=1.30 5 g/cm3 ,Z =4 ,μ(MoKα) =0 .0 96mm-1,F(0 0 0 ) =5 5 2 .晶体结构用直接法解出 ,使用全矩阵最小二乘法对原子参数进行修正 ,最后的偏离因子R =0 .0 398,RW =0 .0 816 .单晶X衍射分析表明标题化合物为 (E)式异构体产物 ,说明该反应具有立体选择性 .