Microstructure,mechanical properties and wear resistance of an Al–Mg–Si alloy produced by equal channel angular pressing

Microstructure, mechanical properties and wear resistance in an ultrafine-grained Al–Mg–Si alloy fabricated utilizing a combination of equal channel angular pressing (ECAP) and dynamic aging were investigated in this paper. The results indicated that the grain size of the ECAP alloy was significantly refined, i.e., to ~239 nm after three ECAP passes. Meanwhile, the yield and tensile strength of the ECAPed material reached 340 MPa and 445 MPa, respectively, while maintaining a significant uniform elongation of 14%. Wear resistance results demonstrated that the wear rate, wear depth and width of the ECAPed material decreased in comparison with the solution-treated (SST) and peak-aged (T6) conditions under a load range of 5–25 N. The adhesive wear that occurs in the undeformed specimens at 10 N does not appear in the ECAPed specimen at the same load, indicating that the ECAPed specimen delay the appearance of more serious wear mechanisms under certain loads. The cooperative interaction of high density nano-scale β" precipitates and dislocations resulted in a combination of super-high strength and good work hardening ability which suppressed the extension of cracks between the friction layer and the plastic deformation zone. As a consequence, the combination of ECAP and dynamic aging brings a significant improvement for antifriction performance of the 6061 aluminum alloy.     

冷轧带钢局部高点卷取过程起筋控制的建模与仿真

为了研究带钢局部高点卷取起筋的控制方法，利用三维弹塑性变形基本理论，并引入带钢塑性流动因子，建立了弹塑性卷取应力和起筋量模型.基于应力函数假设、S. Timoshenko最小功原理和伽辽金虚位移法建立了起筋带钢的应力场分布和可用于在线计算的起筋临界卷取张力设定模型.仿真结果表明：局部高点在径向累积叠加所引起的带钢张力不均匀分布和轴向压应力是导致带钢起筋的主要原因；起筋量随局部高点高度、卷径和卷取张力增加而增大，薄带钢比厚带钢起筋量增幅明显；临界卷取张力随卷径、带钢厚度和局部高点高度增大而减小.     

放顶煤工作面综合防灭火技术研究与应用

对江苏大屯煤电公司龙东矿放顶煤工作面的防灭火实用技术进行了阐述。重点分析了放顶煤开采在掘进、回采、停采时期的煤炭自然发火的原因和所采取的针对性防治技术。     

泵站运行效率分析与节能措施

从泵站的电耗入手，讨论和分析了泵站机组实际运行工况与设计工况的偏离．并通过机组电耗和效率分析，提出了若干节能措施。     

开展项目教学,提高教与学质量

项目教学合理的选择了知识内容和教学方法,保证了学生获得相对完整的专业知识和专业能力,所以项目教学既提高了教师的教学素质,同时也提高了学生各方面的能力。     

旋流式低温送风口的实验研究

对新研制的一种旋流式低温送风口进行了空气动力、速度场、温度场及噪声测试.测试结果表明该旋流式低温送风口诱导效果好、阻力小、能耗低、噪声低、送风均匀、不结露,完全能满足低温送风要求.     

合金铸铁激光处理的探讨——Ⅱ.激光辐照工艺参数的控制

用热传导方程控制激光辐照温度,建立了一种新回归方程以控制激光辐照硬化深度,选用卡尔丹公式列热传导方程及同归方程联立求解,可得到同时满足一定的硬化深度及表面最高温度双重要求的工艺参数,此种方法可作为激光硬化处理工艺参数的控制或预报,对本合金铸铁的激光硬化处理,其表面温度的下限应大于其熔点温度,即以表面产生微熔的快速冷凝处理为宜,并以选取低功率慢扫描为最佳。     

液压传动系统设计中的几个关键问题

文章分析研究了液压传动系统设计中的几个关键性问题。     

王昌龄开元年间仕履新考辨

王昌龄开元年间初仁宦迹，史料记载语焉不详，今人考订又多分歧。通过对唐代选举制度及相关诗文钩稽，辩证，对王昌龄这段经历予以考订，昌龄开元十五年进士及第，通过关试进入守选，曾于当年五月参加制举而来中，开元十九年与二十二年两中宏词，分别被授予校书郎和汜水尉，而后职是开元二十三年春授的。