Microstructure,mechanical properties and wear resistance of an Al–Mg–Si alloy produced by equal channel angular pressing

Microstructure, mechanical properties and wear resistance in an ultrafine-grained Al–Mg–Si alloy fabricated utilizing a combination of equal channel angular pressing (ECAP) and dynamic aging were investigated in this paper. The results indicated that the grain size of the ECAP alloy was significantly refined, i.e., to ~239 nm after three ECAP passes. Meanwhile, the yield and tensile strength of the ECAPed material reached 340 MPa and 445 MPa, respectively, while maintaining a significant uniform elongation of 14%. Wear resistance results demonstrated that the wear rate, wear depth and width of the ECAPed material decreased in comparison with the solution-treated (SST) and peak-aged (T6) conditions under a load range of 5–25 N. The adhesive wear that occurs in the undeformed specimens at 10 N does not appear in the ECAPed specimen at the same load, indicating that the ECAPed specimen delay the appearance of more serious wear mechanisms under certain loads. The cooperative interaction of high density nano-scale β" precipitates and dislocations resulted in a combination of super-high strength and good work hardening ability which suppressed the extension of cracks between the friction layer and the plastic deformation zone. As a consequence, the combination of ECAP and dynamic aging brings a significant improvement for antifriction performance of the 6061 aluminum alloy.     

Effect of heat treatment on microstructures and properties of a novel Al-Zn-Mg-Cu alloy for oil drilling

In view of the special requirements for strength, heat resistance and corrosion resistance of Al-Zn-Mg-Cu alloy for oil drilling, the Al-6.2 Zn-2.5 Mg-1.6 Cu alloy was prepared by increasing Cu content on basis of Russian Series 1953 alloy. The effect of heat treatment on the microstructures and properties of the alloy was characterized by optical microscope(OM), scanning electron microscope(SEM) and transmission electron microscope(TEM), and investigated by tensile test at room temperature, thermal exposure test and corrosion test. The results show that the strength after T6 aging treatment exhibit a decrease trend as an increase of the solution temperature from465 °C to 480 °C. After the solution treated by the rate of 470 °C/1 h, second phases dissolve into the matrix very well and the strength property reaches optimum. The alloy has better comprehensive properties treated by a solution treatment of 470 °C/1 h and then followed by an aging treatment of 120 °C/24 h + 170 °C/1 h + 120 °C/24 h. Under the aging state, the precipitated phases inside the grains are suitable in size, while on the grain boundary distribute discontinuously and the precipitate-free zone is obvious. Besides, the alloy still maintain high tensile properties. The yield strength, tensile strength and elongation are 650 MPa, 686 MPa,12.0%, respectively. The yield strength retention after heat exposure is 92%. The alloy has good corrosion resistance and the exfoliation corrosion degree. The average corrosion rate in the H_2S and CO_2 environment is 0.0024 mm/a, which is far less than the required 0.12 mm/a. It is insensitive to H_2S and CO_2 environments.     

论高校图书馆学科馆员个人素质和业务能力的提升

学科馆员是图书馆馆藏资源的重要载体,也是图书馆提供读者服务的关键。阐述了学科馆员的定义与内涵,介绍了学科馆员的工作内容,探讨了学科馆员个人素质和业务能力的提升空间。     

冷轧带钢局部高点卷取过程起筋控制的建模与仿真

为了研究带钢局部高点卷取起筋的控制方法，利用三维弹塑性变形基本理论，并引入带钢塑性流动因子，建立了弹塑性卷取应力和起筋量模型.基于应力函数假设、S. Timoshenko最小功原理和伽辽金虚位移法建立了起筋带钢的应力场分布和可用于在线计算的起筋临界卷取张力设定模型.仿真结果表明：局部高点在径向累积叠加所引起的带钢张力不均匀分布和轴向压应力是导致带钢起筋的主要原因；起筋量随局部高点高度、卷径和卷取张力增加而增大，薄带钢比厚带钢起筋量增幅明显；临界卷取张力随卷径、带钢厚度和局部高点高度增大而减小.     

智能高速罐身电阻焊机数字化控制系统

提出了以国产MCT80 0 0F8运动控制器为核心的智能高速罐身电阻焊机数字化控制系统 ,并介绍了系统的组成、工作原理、硬件接口、电机控制方法以及伺服电机的运动关系数学模型 .新的系统有利于提高罐身电阻焊机的制罐生产速度 ,并具有功能全面、可靠性高、控制精确、开放性好以及成本较低等优点     

论家庭教育中儿童人格的塑造与培养

父母及家庭环境对儿童人格形成与发展具有十分重要的影响。父母要以身示范,营造和睦、健康、向上的家庭氛围。在儿童人格塑造和培养中,要十分重视智力因素的培养,特别注意早期智力与创造力的开发,重视社会适应能力的培养,包括融入集体生活的能力、人际适应能力和环境适应能力等。     

与时俱进,提升高校党委的工作水平

面对新时期新形势新任务，要与时俱进做好工作．高校党委必须提高认识水平、协调水平、管理水平和创新水平，最终体现为发展水平。     

高师大学生体育行为调查与研究

采用问卷调查、数理统计和文献资料法对六所不同地区的高师非体育专业不同专业和各年级师范类大学生的体育行为进行了调查研究。结果表明,影响高师大学生体育行为形成的最主要因素是对体育运动的兴趣;对体育运动的价值取向主要是增进身心健康;对参加体育运动的频率调查显示当前高师大学生参加体育运动的状况并不很理想,只偶尔参加体育运动的同学占调查者的四分之一多;大学生最常参加的体育运动项目主要是球类项目;影响同学参加体育锻炼的主要因素是体育运动场地和器材的缺少;高师大学生最需要提高的体育能力是科学锻炼能力。     

浅析我院高职学生创业能力的培养

我国正由工业经济向知识经济转变，产业结构不断调整。在新形势下，高职教育必须改革创新，增强自身活力，积极主动地适应经济和社会发展的需要。而大力加强对学生创业能力的培养是高职教育生存和发展的必经途径，也是高职教育永保青春活力的必由之路。     

浅谈体育教育专业学生试教的指导

“试教”是从学生到教师进行角色转换的必修课 .本文从实践中提炼出试教的指导方法 ,旨在为教师在试教过程中有针对性地指导学生提供帮助 ,从而达到提高学生教学能力的目的 ,使学生从心理、教学能力等诸方面顺利完成从学生到教师的角色过渡 .