基于多材质复合管柱的裸眼井壁支撑工艺及应用

已完钻超深裸眼水平井侧钻技术是经济、高效开发油藏剩余油的主要手段之一，传统的磨铣钢套管开窗侧钻技术存在下入摩阻大、磨铣耗时长导致开窗失败等问题。为此，提出了基于多材质复合管柱的超深水平井裸眼井壁支撑工艺，结合中国西北油田已完钻超深裸眼水平井井况，首先，提出了基于“铝合金+碳钢”的多材质复合管柱组合及设计方法；其次，开展了基于管柱实物屈曲实验数据的管柱临界屈曲载荷计算模型适用性评价，并优选出了适合于“铝合金+碳钢”多材质复合管柱的屈曲临界载荷计算模型；最后，研究了综合考虑管柱扭矩、摩阻、刚性、井眼条件、管柱强度及材质的多材质复合管柱下入性分析方法，并利用下入性分析软件对西北油田顺北X1井、X2井、X3井、X4井复合管柱进行了下入可行性评价。该方法在X1井和X2井得到成功应用，进一步论证了该工艺现场应用的可行性。研究成果可为超深水平井裸眼井壁支撑的复合管柱设计和下入可行性评价提供理论参考。     

模具结构对连续纤维增强热塑性复合材料性能的影响

采用自行设计的两种不同结构的熔融浸渍模具制备了连续玻璃纤维增强聚丙烯预浸带，测试了模具结构对预浸带的孔隙率、纤维断裂率、界面形貌、纤维分散均匀度和拉伸强度的影响，建立了纤维浸渍模型和纤维断裂模型，并通过理论模型对预浸带的孔隙率和断裂率进行理论预测。结果表明，本文建立的数学模型能够有效预测预浸带的浸渍程度和纤维断裂率，可用于浸渍模具结构的优化设计；在本文范围内，与波浪形模具相比，斜齿形模具的多楔形区结构可以有效地降低预浸带孔隙率和提升纤维分散程度；波浪形模具的流道圆角半径较大，楔形区个数较少，与斜齿形模具相比，可有效降低纤维断裂率并提升拉伸性能。     

数据驱动的铝基复合材料性能预测和逆向设计

采用数据驱动的方法对 SiCp(0.5CNT)/7075Al 铝基复合材料的化学成分以及制备工艺进行了分析, 针对抗拉强度和延伸率两个力学性能进行了特征重要性分析, 构建了包含 8 种机器学习算法的集成框架, 自动进行模型的参数调优和最优模型选择, 并在此基础上进行了材料逆向设计. 实验结果表明, 在 470 ${^\circ}$C 固溶 40 min, 120${^\circ}$C 时效 15 h 的热处理工艺下, SiCp(0.5CNT)/7075Al-1.0Mg 复合材料抗拉强度和延伸率的预测值为 617.48 MPa 和 2.98%, 实验值为 647.0 MPa 和 3.31%, 两项物理性能的平均绝对百分比误差(mean absolute percentage errors, MAPE)较小, 依次为 4.56% 和 9.97%. 这说明本数据驱动方法对铝基复合材料的工艺优化和性能提升有一定指导意义.     

高职生“学习参与度”对创新创业核心素养的影响机制研究

通过对523名高职学生进行实地调研,探析“学习参与度”对学生创新创业核心素养的影响机制。结果显示:课程建设、教师引导、资源支持对学习心理参与度影响显著;教师引导、资源支持、社会实践对学习行为参与度影响显著。学习参与度显著影响创业意识、创新精神、创业能力。提出优化对策:重视学生创新创业核心素养的培养;提高学生创新创业学习参与度;人际互动提升学习心理参与度;协同培育提高学习行为参与度。     

Microstructure,mechanical properties and wear resistance of an Al–Mg–Si alloy produced by equal channel angular pressing

Microstructure, mechanical properties and wear resistance in an ultrafine-grained Al–Mg–Si alloy fabricated utilizing a combination of equal channel angular pressing (ECAP) and dynamic aging were investigated in this paper. The results indicated that the grain size of the ECAP alloy was significantly refined, i.e., to ~239 nm after three ECAP passes. Meanwhile, the yield and tensile strength of the ECAPed material reached 340 MPa and 445 MPa, respectively, while maintaining a significant uniform elongation of 14%. Wear resistance results demonstrated that the wear rate, wear depth and width of the ECAPed material decreased in comparison with the solution-treated (SST) and peak-aged (T6) conditions under a load range of 5–25 N. The adhesive wear that occurs in the undeformed specimens at 10 N does not appear in the ECAPed specimen at the same load, indicating that the ECAPed specimen delay the appearance of more serious wear mechanisms under certain loads. The cooperative interaction of high density nano-scale β" precipitates and dislocations resulted in a combination of super-high strength and good work hardening ability which suppressed the extension of cracks between the friction layer and the plastic deformation zone. As a consequence, the combination of ECAP and dynamic aging brings a significant improvement for antifriction performance of the 6061 aluminum alloy.     

Constructing and evaluating core inflation measures from component‐level inflation data

This paper undertakes a comprehensive examination of 10 measures of core inflation and evaluates which measure produces the best forecast of headline inflation out‐of‐sample. We use the Personal Consumption Expenditure Price Index as our measure of inflation. We use two sets of components (17 and 50) of the Personal Consumption Expenditure Price Index to construct these core inflation measures and evaluate these measures at the three time horizons (6, 12 and 24 months) most relevant for monetary policy decisions. The best measure of core inflation for both sets of components and over all time horizons uses weights based on the first principal component of the disaggregated (component‐level) prices. Interestingly, the results vary by the number of components used; when more components are used the weights based on the persistence of each component is statistically equivalent to the weights generated by the first principal component. However, those forecasts using the persistence of 50 components are statistically worse than those generated using the first principal component of 17 components. The statistical superiority of the principal component method is due to the fact that it extracts (in the first principal component) the common source of variation in the component level prices that accurately describes trend inflation over the next 6–24 months.     

深井孤岛工作面过探巷技术研究

邢东矿2225工作面为孤岛工作面,承受地压大,回采过程中经过2225探巷,巷道围岩破坏剧烈,尤其是底鼓变形严重,初期采取排木垛、打单体等措施在一定程度上控制了探巷顶板下沉,而工作面临近时在煤帮注化学浆形成锚注加固结构使煤体自身强度及承载能力显著增强,锚注加固结构具有较好的整体性和稳定性,从而实现工作面顺利回采。     

红树林保护与修复标准发展现状及对策

回顾近20年来中国对红树林的保护以及通过人工造林进行恢复的情况, 梳理我国红树林保护与修复的相关标准, 厘清现行标准存在的问题, 提出如下相应的建议与对策。1) 应结合国家碳中和战略及红树林保护与恢复规划目标, 制定完善的红树林保护与生态修复技术标准体系规划, 加快相关国家标准的出台; 2) 在编制红树林保护与修复相关标准的同时, 应注重红树林固碳能力和增汇效应的提高; 3) 建议制定退塘还林相关标准, 填补国内空白; 4) 应充分落实“自然恢复为主、人工修复为辅”的生态修复原则, 重视并加强红树林保护与修复标准的技术细节制定; 5) 标准的制定和实施应由红树林研究专业机构及专家深度参与, 提高造林成活率。     

Supercritical Fluid Carbon Dioxide in the Extraction of Lanolin and Its Alcohol

The use of supercritical fluid carbon dioxide (SF-CO_2) in extraction of lanolin and its alcohol issuperior to the conventional solvent extractionmethod. Its distinctive advantages include highextractive ratio, nontoxic and nonflammablesolvents, and minimal by-product pollution. The     

碳钢在NaHCO3+NaCl溶液中的亚稳态孔蚀特征

用动电位极化和恒电位极化法研究了A3碳钢在不同浓度NaCl的0.5mol/LNaHCO₃溶液中亚稳态孔蚀行为。实验发现亚稳态电流波动峰具有快速上升、缓慢下降的特点。亚稳孔出现电位E_m 服从正态分布,随着Cl^-浓度的提高,E_m 值向负方向移动。亚稳孔的峰频变化规律与电位关系不大。恒电位极化时,当电位高于E_m而大大低于孔蚀电位E_b 时,电流波动保持一定时间后会最终消失,并产生直径为微米级的小蚀孔。当电位接近孔蚀电位时,一段时间的电流波动后电流往往迅速上升,最终转变为稳定蚀孔.