FeCo-based hybrid MOF derived active species for effective oxygen evolution

Metal-organic frameworks(MOFs) have been regarded as promising catalyst materials due to the richness of coordinately unsaturated metal sites on the surface,which can act as catalytic active centres.In this study,a hybrid MOF material composed of Fe-based MOF and Co-based MOF was prepared with the involvement of graphene oxide nanosheets as additive.It was demonstrated that the hybrid MOF materials showed much higher electro-catalytic activity towards oxygen evolution than the single-phase counterparts.To drive current density of 10 mA cm~(-2),the hybrid CoFe-based MOF only needed an over potential of 290 mV in 1 M KOH.The catalytic activity could sustain for a longer time with only slight current density decrease.During oxygen evolution operation,the MOF catalyst evolved into catalytic active species but kept well the microscale sheet-like structure.It is thus believed that this study will provide an avenue for the development of advanced electrocatalysts.     

Acyl-chloride functionalized graphene oxide chemically grafted with hindered phenol and its application in anti-degradation of polypropylene

In this study,graphene oxide (GO) nanosheets were first functionalized by the acyl-chloride reaction and then reacted with hindered phenol (HP) to obtain HP grafted GO (GO-g-HP).The GO-g-HP prepared under the optimized condition exhibited a high efficiency against both thermal and photo oxidation of isotactic polypropylene (iPP).GO-g-HP exhibited a much better anti-aging efficiency than that of HP and GO used individually or that of their physical mixture.The outstanding anti-aging effect of GO-g-HP was attributed to the excellent synergistic effect produced between the chemically bonded GO and HP,which resulted in an improved oxygen barrier property of GO and excellent utilization of the free radical scavenging capability of GO and HP.Also,thanks to the grafting of HP on GO,the physical loss of HP,which was one of the main shortcomings for traditional small molecular antioxidants,was largely suppressed.It is expected that the GO-g-HP prepared can well meet the requirement of long-term applications of polymers in some harsh service conditions.     

工程中常用的几种氧化沟及其发展

简要介绍了当今工程中常用的几种氧化沟技术的特点及其发展历程,主要包括Carrousel氧化沟、Orbal氧化沟、交替式氧化沟以及一体化氧化沟。     

pH、温度和浓度对苯酚在V掺杂MoOx-C/Ti电极上的电催化氧化的影响

采用溶胶-凝胶法合成MoOx、MoOx-V5 (x%)胶体,通过Vulcan XC-72炭黑负载制备炭载钼系氧化物电催化剂.利用循环伏安法(CV)测试手段研究苯酚在电极上的氧化降解,考察了掺杂元素、溶液pH值、苯酚浓度、扫描速率、温度对苯酚氧化性能的影响.测试结果表明:苯酚在电极上的氧化是受扩散和电子转移联合控制的复杂过程;掺杂过渡金属元素V可以降低苯酚氧化的表观活化能,提高电化学性能;溶液的pH值越低,MoOx-C/Ti电极对苯酚的催化氧化活性越高;pH在0～6,苯酚的氧化经历了相似的历程,包含了相同的电子数和质子数;苯酚氧化峰电流随着浓度、温度的增加而增加,到一定程度后趋于稳定.     

Fe_3Al的抗高温氧化和耐热腐蚀性能

在７００℃与８５０℃的高温下，Ｆｅ＿３Ａｌ金属间化合物表面形成了Ａｌ＿２Ｏ＿３保护膜，使其抗氧化性能远优于不妨钢，２％Ｃｒ（原子百分比）加入Ｆｅ＿３Ａｌ会导致氧化过程初期氧化速率的增高，在熔融的硫酸盐和高压锅炉的烟气中，Ｆｅ＿３Ａｌ的耐热腐蚀性能优于高温合金ＧＨ１３２．     

对无机化学教材中引进锰的自由能——氧化态图的探讨

本文对无机化学教材中引进锰的自由能——氧化态图进行了讨论.这对无机化学的教材改革是十分有意义的.对氧化态图直观性的分析和绘制氧化态图的研究对教学更具影响.     

小分子修饰型负载钌配合物的组成及其催化性能

对负载型钌配合物的组成进行了原位红外表征,并讨论了其催化氧化性能     

不同贮藏条件下鳗骨油氧化特性的研究

研究了室温下（15℃）鳗骨油在空气中的自氧化速度,以及温度和贮藏条件对鳗骨油氧化速度的影响。实验所设的温度梯度分别为6℃、15℃、35℃,贮藏条件分别是敞口,密封（蜡封）和用N2驱除氧气后密封保存。实验结果显示,室温下鳗骨油在空气中的自氧化速度,敞口存放4天,过氧化值就已超过0.15;温度和贮藏条件对鳗骨油的氧化速度有显著影响,驱除氧气低温贮藏可以有效地防止鳗骨油的氧化。     

1,3—二氯—2—丙醇氧化反应的研究

对１,３－二氯－２－丙醇的氧化反应进行了系统的研究,将８４％的硫酸溶液慢慢滴加到包含有１,３－二氯－２丙醇和重铬酸钠水溶液的反应容器中去,将体系保持在２４℃～２６℃拦反应６ｈ,反应完成后,过滤回收１,３－二氯丙酮粗品,粗品用冰水洗涤,然后通过蒸馏经可获得８０．４％的收率的１,３－二氯丙酮,这是一种合成１,３－二氯丙酮较好的工艺,这种工艺与同类文献介绍的方法比较目标产物收率提高１０％,而反应时间缩短     

粘胶基碳布电化学氧化表面处理的研究

本文用电化学氧化方法对粘胶基碳布进行表面处理。采用电位滴定法分析测定了氧化处理前后碳纤维表面酸性官能团含量的变化,用水滴铺展方法分析了处理前后碳布润湿性能的变化情况,探讨了酸性官能团含量、织物强力与复合材料层间剪切强度的关系,找出了以Ｈ３ＰＯ４为电解质的最佳电化学氧化表面处理工艺。