城市区域多物流无人机协同任务分配

针对城市区域多无人机协同物流任务分配问题, 综合考虑不同无人机性能、物流时效性、飞行可靠性等影响因素, 以经济成本、时间损失和安全风险最小为目标函数, 构建多无人机协同物流任务分配模型。因问题规模大、求解复杂度高, 设计改进的量子粒子群算法进行求解。首先，为增强粒子遍历性和多样性, 采用均匀化级联Logistic映射进行粒子初始化; 其次，为避免算法陷入局部最优解, 引入基于高斯分布的粒子变异方式; 最后，为提高算法运行效率, 运用自适应惯性权重方法对粒子赋值。仿真实验结果表明，所构建的模型能够实现任务分配多目标优化, 贴近城市区域无人机物流配送实际; 所提算法与传统量子粒子群算法和遗传算法相比, 任务分配代价分别下降了5.9%和6.3%;并进一步对参数权重设置进行分析, 当3个子目标函数权重系数分别为0.225、0.275和0.500, 种群规模为150时, 算法规划的结果最优。     

Microstructure,mechanical properties and wear resistance of an Al–Mg–Si alloy produced by equal channel angular pressing

Microstructure, mechanical properties and wear resistance in an ultrafine-grained Al–Mg–Si alloy fabricated utilizing a combination of equal channel angular pressing (ECAP) and dynamic aging were investigated in this paper. The results indicated that the grain size of the ECAP alloy was significantly refined, i.e., to ~239 nm after three ECAP passes. Meanwhile, the yield and tensile strength of the ECAPed material reached 340 MPa and 445 MPa, respectively, while maintaining a significant uniform elongation of 14%. Wear resistance results demonstrated that the wear rate, wear depth and width of the ECAPed material decreased in comparison with the solution-treated (SST) and peak-aged (T6) conditions under a load range of 5–25 N. The adhesive wear that occurs in the undeformed specimens at 10 N does not appear in the ECAPed specimen at the same load, indicating that the ECAPed specimen delay the appearance of more serious wear mechanisms under certain loads. The cooperative interaction of high density nano-scale β" precipitates and dislocations resulted in a combination of super-high strength and good work hardening ability which suppressed the extension of cracks between the friction layer and the plastic deformation zone. As a consequence, the combination of ECAP and dynamic aging brings a significant improvement for antifriction performance of the 6061 aluminum alloy.     

量子霍耳效应探讨

本文从线性响应理论的久保公式出发，用正则系综求统计平均的方法，导出了整数量子霍耳电导。从而解释了整数量子霍耳效应。     

Maxwll－Boltzmann统计分布浅析

本文详细讨论了通用教材中对ＭＢ系统的定义及ＭＢ统计分布和各种表述形式，指出ＭＢ系统的最主要标记应是“粒子的可分辨性”，提出了讲述ＭＢ统计分布的一些建议．     

电感耦合电路的量子力学处理

通过正则变换 ,用代数法求解了电感耦合电路的量子涨落 ,并指出电感耦合电路不存在量子压缩效应。     

C60偶联多孔硅系统的蓝光发射

用G60作为表面钝化剂，与多孔硅进行偶联．发现当C60偶联多孔硅系统在空气中存储一年后，能够发射460nm左右的强烈蓝光．经过系统的测量和分析，认为蓝光起源的发光中心与SiO2体材料中的“自捕获激子”模型类似．它是由一个氧空位和一个间隙氧组成的，间隙氧同时和相邻的晶格氧形成过氧连接．光激发载流子来自于Si纳米晶粒的核心，辐射复合过程则在多孔硅表面的发光中心进行．进一步的电子束辐照和臭氧辐照实验证明了这个发光中心的存在．从FTIR谱的分析，推测是样品表面Si=O双键的缓慢变化促使了蓝光中心的自发产生．     

海森伯—量子力学的奠基人之一

沃纳·海森伯是被公认为 2 0世纪最具创新能力的思想家之一 ,他从修改经典分析力学的途径创立了量子力学的矩阵形式 ,并提出了著名的“不确定原理”.通过对海森伯在量子力学领域这两项重要发现过程的描述 ,来展示这位伟大思想家敏锐的思维历程和独特的科研风格 .     

A NEW DESCRIPA NEW DESCRIPTOR OF AMINO ACIDS BASED ON THE THREEDIMENSIONAL VECTOR OF ATOMIC INTERACTION FIELD

QUANTITATIVE STRUCTURE ACTIVITY RELATIONSHIP (QSAR) IS A VERY IMPORTANT TOPIC FOR MANY SCIENTIFIC FIELDS AND CAN BE TERMED AS QUANTITATIVE SEQUENCE ACTIVITY MODELS(QSAM)[1] WHEN REFERRED TO THE RESEARCH ON RELATION- SHIPS BETWEEN STRUCTURES AND ACTIVITIES OF BIOLOGICAL MOLECULES, SUCH AS PROTEINS, AND NUCLEIC ACIDS. HOW- EVER, IT IS VERY DIFFICULT TO ESTABLISH A QSAM MODEL,…     

量子阱中类氢杂质束缚能的压力效应

本文采用变分法研究了量子阱中类氢杂质的束缚能的压力效应，尤其在阱较窄的情形下，其压力效应更为显著．     

弱Hopf代数wslq2的代数结构

将弱Hopf代数的一个特例弱量子群wslq2分解为％（sl2）和二元多项式代数的直和，从而将wsl12的表示归结为％（sl2）和二元多项式代数的表示。还研究了wslq2的限制表示，证明了wslq2（m，n）同构于Uq（m，n）和一个带关系的二元多项式代数的直和，从而将wslq2的限制表示归结为％（sl2）和一个带关系的二元多项式代数的表示。