Microstructure,mechanical properties and wear resistance of an Al–Mg–Si alloy produced by equal channel angular pressing

Microstructure, mechanical properties and wear resistance in an ultrafine-grained Al–Mg–Si alloy fabricated utilizing a combination of equal channel angular pressing (ECAP) and dynamic aging were investigated in this paper. The results indicated that the grain size of the ECAP alloy was significantly refined, i.e., to ~239 nm after three ECAP passes. Meanwhile, the yield and tensile strength of the ECAPed material reached 340 MPa and 445 MPa, respectively, while maintaining a significant uniform elongation of 14%. Wear resistance results demonstrated that the wear rate, wear depth and width of the ECAPed material decreased in comparison with the solution-treated (SST) and peak-aged (T6) conditions under a load range of 5–25 N. The adhesive wear that occurs in the undeformed specimens at 10 N does not appear in the ECAPed specimen at the same load, indicating that the ECAPed specimen delay the appearance of more serious wear mechanisms under certain loads. The cooperative interaction of high density nano-scale β" precipitates and dislocations resulted in a combination of super-high strength and good work hardening ability which suppressed the extension of cracks between the friction layer and the plastic deformation zone. As a consequence, the combination of ECAP and dynamic aging brings a significant improvement for antifriction performance of the 6061 aluminum alloy.     

C60偶联多孔硅系统的蓝光发射

用G60作为表面钝化剂，与多孔硅进行偶联．发现当C60偶联多孔硅系统在空气中存储一年后，能够发射460nm左右的强烈蓝光．经过系统的测量和分析，认为蓝光起源的发光中心与SiO2体材料中的“自捕获激子”模型类似．它是由一个氧空位和一个间隙氧组成的，间隙氧同时和相邻的晶格氧形成过氧连接．光激发载流子来自于Si纳米晶粒的核心，辐射复合过程则在多孔硅表面的发光中心进行．进一步的电子束辐照和臭氧辐照实验证明了这个发光中心的存在．从FTIR谱的分析，推测是样品表面Si=O双键的缓慢变化促使了蓝光中心的自发产生．     

一维核废料污染问题的一个二阶格式

利用降价法研究了多孔介质中一维核废料污染问题，此模型由一非线性抛物－椭圆耦合偏微分方程组的初边值问题来描述，对此问题给出了一个关于时间和空间均具有二阶精度的差分格式，并进行了理论分析。     

绢纺生产用抗静电剂的研究——SS1与SS2绢纺抗静电剂

本文对绢纺生产用抗静电剂的配方进行了研究,研制出SS1及SS2绢纺抗静电剂。应用表明,采用此类抗静电剂,不但降低了生产中的静电,而且提高了梳折;在圆梳系统中提高了3.23％,在精梳系统中提高了3.1％;同时精绵的长度和强力也有所增加,从而提高了经济效益。     

油田含聚废水处理方法研究

介绍了JCS净水剂在油田含聚丙烯酰胺污水处理中的应用、基本工艺流程、最佳投加量以及成本。     

论司马迁的商品经济创新思想

商品经济是否发达是某一历史时期社会发展的一个主要表现。但是,西汉时期,在前代统治者奉行“重农抑商”政策的情况下,在汉武帝独尊儒术强化思想统治的时候,司马迁能够首创经济史传,第一个系统的考察商品经济的发展及其特征,提出了一整套发展生产、扩大商品交换、富国富家的经济理论,总结了商人在商品经济中的作用以及经营管理之道,不仅使西汉走向了繁荣,而且达到了划时代的最高水平。司马迁的商品经济创新思想能发表在那样的时期,他的胆略和精神是难能可贵的,是值得我们认真清理的一笔财富。     

Microbial degradation of bitumen

Summary A blown bitumen Mexphalte R 90/40 with a high content of saturated hydrocarbons was degraded by several microorganisms to the same extent. In batch cultures ofSaccharomycopsis lipolytica, maximal biodegradation was estimated to be about 9% w/w, 3.2·10^–3 g/cm² and 3.1·10^–3 cm of degraded bitumen. The Mexphalte R 90/40 degradation rate was closely coupled to biofilm formation. The microbial activity concerned predominantly the oxidation of saturated hydrocarbons. A direct distillation bitumen 80/100 with a low content of saturated hydrocarbons and a high content of aromatic hydrocarbons and resins was more resistant to biodegradation.     

热管的应用探讨

分析热管的特性与发展前景,探讨热管在余热回收和采暖方面的应用.     

高温菌及用于废物处理的研究

论述了高温菌的特点 ,讨论了高温菌在废物处理过程中的应用 ,指出了高温菌用于废物处理系统的优点及不足     

冶炼工业废气中SO_2的脱除研究

研究用软锰矿的水悬浮液脱除冶炼工业废气中SO_2的工艺可行性,提出抑制副产物MnS_2O_6生成的途径。