门捷列夫的“旷缺”与中国公使的感叹

1869年门捷列夫完成了世界上第一张化学元素周期表,除了把当时所知的全部63种元素按原子量大小分组(族)排列外,还在表中留下一些空位,预言了与硼、铝、硅类似的元素的存在及其性质。随后的20多年内,这些空位相继被新发现的元素填补。1877年中国首任驻英公使郭嵩焘听到了门捷列夫的预言与元素镓的发现这一故事,联想到发现海王星的经过,由衷感叹西方科学的精致与功效。     

墨学"中绝"的五大原因探析

墨家是先秦诸子中颇具影响、号称“显学”的重要学派。但“其兴也勃，其亡也忽”。到了汉代就无传了，像一颗流星般划过中国思想界的耿耿长夜。墨学“中绝”主要存在社会结构、文化传统、思想意识、阶级基础、组织形式等五个方面的原因。     

钼对低合金钢硝酸盐体系应力腐蚀的影响

以高风温热风炉用钢的沿晶应力腐蚀开裂问题为背景,研究了Ｍｏ对低合金钢在硝酸盐溶液中的应力腐蚀行为。结果表明,低合金钢中加入合金元素将使钢中贝氏体和／或珠光体含量增大,从而提高了材料的稳定性和抗ＳＣＣ耐蚀性。提出了低合金钢／硝酸盐溶液体系的“温度－钼含量－ＳＣＣ图”。     

Mo/CuZSM-5的微波辐射法制备及其性能研究

借助微波辐射，制备出一系列具有不同Cu^2＋交换度的Mo／CuZSM-5催化剂，并探讨了交换液浓度、固液比、微波强度以及微波加热时间对交换度的影响．研究了不同交换方法、不同交换度下的催化剂对甲烷无氧芳构化反应的催化效果，并进一步对反应条件进行了优化．实验结果表明：交换液浓度和固液比对交换度有较大的影响；与室温离子交换法相比，微波辐射下的离子交换速率和交换度大幅度提高．对不同催化刺样品催化性能的研究结果表明：催化活性与Cu^2＋含量密切相关，Cu^2＋的适量引入有助于提高催化剂的活性和稳定性。红外光谱、X射线衍射测试结果表明：微波辐射离子交换并未改变分子筛载体的结构；Cu^2＋的引入促使更多的活性物种分布在催化剂外表面。     

29～1 100keV能区98Mo(n,γ)~(99)Mo反应截面的测量

在２．５ＭＶ静电加速器上，利用活化法相对于１９７Ａｕ的中子俘获截面，在２９～１１００ｋｅＶ中子能区测量了９８Ｍｏ（ｎ，γ）９９Ｍｏ的反应截面，并将测量结果与已有数据进行了比较     

锡表面Mo(W)-S-Sn彩色簇合物膜的组成与结构研究

通过(NH4)2Mo(W)S4溶液浸渍,在金属Sn表面获得了不溶性且具有金属光泽的Mo(W)-S-Sn彩色簇合物膜。FT-IR、F-IR、FT-Raman、XPS和AES研究表明,簇合物膜中存在Mo(W)-S-Sn、端基Mo(W)-S和端基Mo(W)-O键,膜层由Mo(W)、S、Sn和O元素组成,膜为多分子层结构,从AES深度分布曲线的组成恒定区求得了元素的相对原子百分数和膜层厚度。     

Studies on induction hardening of powder-metallurgy-processed Fe-Cr/Mo alloys

Induction hardening of dense Fe-Cr/Mo alloys processed via the powder-metallurgy route was studied. The Fe-3Cr-0.5Mo, Fe-1.5Cr-0.2Mo, and Fe-0.85Mo pre-alloyed powders were mixed with 0.4wt%, 0.6wt%, and 0.8wt% C and compacted at 500, 600, and 700 MPa, respectively. The compacts were sintered at 1473 K for 1 h and then cooled at 6 K/min. Ferrite with pearlite was mostly observed in the sintered alloys with 0.4wt% C, whereas a carbide network was also present in the alloys with 0.8wt% C. Graphite at prior particle boundaries led to deterioration of the mechanical properties of alloys with 0.8wt% C, whereas no significant induction hardening was achieved in alloys with 0.4wt% C. Among the investigated samples, alloys with 0.6wt% C exhibited the highest strength and ductility and were found to be suitable for induction hardening. The hardening was carried out at a frequency of 2.0 kHz for 2-3 s. A case depth of 2.5 mm was achieved while maintaining the bulk (interior) hardness of approximately HV 230. A martensitic structure was observed on the outer periphery of the samples. The hardness varied from HV 600 to HV 375 from the sample surface to the interior of the case hardened region. The best combination of properties and hardening depth was achieved in case of the Fe-1.5Cr-0.2Mo alloy with 0.6wt% C.     

Effects of Cr and Mo elements on the microstructures and compressive properties of the in situ (TiC_xN_y–TiB_2)/Ni cermets

In-situ(TiC_xN_y–TiB_2)/Ni cermets with 70 wt%TiC_xN_y–TiB_2 were successfully fabricated by combustion synthesis and hot pressing sintering in Ni-Ti-B_4C-BN powder systems.The microstructures,density,compressive properties,and hardness of the TiC_xN_y–TiB_2/Ni cermets with the addition of 0–8 wt%Cr/Mo to the Ni-Ti-B_4C-BN powder systems were compared and analysed.The results showed that the ceramic particles distributed uniformly in the cermets,and the size of the ceramic particles reduced with the Cr/Mo addition.Both Cr and Mo addition can improve the hardness,compressive properties,and fracture strains of the cermets.The hardness,compressive strength,and fracture strain of the(TiC_xN_y–TiB_2)/(Ni+Cr)cermets increased from 1561 HV,2.94 GPa,and 2.9%to 1864 HV,3.65 GPa,and 3.4%,respectively when the Cr content increased to 5 wt%.The hardness and compressive strength of the(TiC_xN_y–TiB_2)/(Ni+Mo)cermets increased from 1561 HV and 2.94 GPa to 1902 HV and 3.43 GPa,respectively when the Mo content increased to 8 wt%.The cermets with Cr had better compressive properties than the cermets with Mo.     

微波等离子体法制备纳米钼粉

阐述用微波等离子法制备纳米金属钼粉的原理,探讨了此法制备纳米钼粉颗粒的工艺与影响因素,并以羰基钼为原料制得纳米级钼粉,平均粒径小于５０ｎｍ,还研究了钼粉在空气中的热稳定性。     

铸态奥－贝球铁的抗汽蚀性

介绍了铸态奥－贝球铁的制取方法及其组织和性能。并研究了铸态奥－贝球铁抗汽蚀特性。实验表明，铸态奥－贝球铁的抗汽蚀性能比普通球铁高出约３倍，Ｎｉ，Ｍｏ，Ｃｕ和Ｂ等元素对铸态奥－贝球铁的组织、机械性能及抗汽蚀性都起着十分重要的作用，保留在室温的奥氏体组织有着良好的抗汽蚀性．