Microstructure,mechanical properties and wear resistance of an Al–Mg–Si alloy produced by equal channel angular pressing

Microstructure, mechanical properties and wear resistance in an ultrafine-grained Al–Mg–Si alloy fabricated utilizing a combination of equal channel angular pressing (ECAP) and dynamic aging were investigated in this paper. The results indicated that the grain size of the ECAP alloy was significantly refined, i.e., to ~239 nm after three ECAP passes. Meanwhile, the yield and tensile strength of the ECAPed material reached 340 MPa and 445 MPa, respectively, while maintaining a significant uniform elongation of 14%. Wear resistance results demonstrated that the wear rate, wear depth and width of the ECAPed material decreased in comparison with the solution-treated (SST) and peak-aged (T6) conditions under a load range of 5–25 N. The adhesive wear that occurs in the undeformed specimens at 10 N does not appear in the ECAPed specimen at the same load, indicating that the ECAPed specimen delay the appearance of more serious wear mechanisms under certain loads. The cooperative interaction of high density nano-scale β" precipitates and dislocations resulted in a combination of super-high strength and good work hardening ability which suppressed the extension of cracks between the friction layer and the plastic deformation zone. As a consequence, the combination of ECAP and dynamic aging brings a significant improvement for antifriction performance of the 6061 aluminum alloy.     

合金铸铁激光处理的探讨——Ⅱ.激光辐照工艺参数的控制

用热传导方程控制激光辐照温度,建立了一种新回归方程以控制激光辐照硬化深度,选用卡尔丹公式列热传导方程及同归方程联立求解,可得到同时满足一定的硬化深度及表面最高温度双重要求的工艺参数,此种方法可作为激光硬化处理工艺参数的控制或预报,对本合金铸铁的激光硬化处理,其表面温度的下限应大于其熔点温度,即以表面产生微熔的快速冷凝处理为宜,并以选取低功率慢扫描为最佳。     

利福平菌丝体厌氧生化处理的研究

制药厂生产利福平过程中产生大量的利福平菌丝体,可严重污染环境。用厌氧消化法处理利福平菌丝体,消化温度40℃,反应器容积负荷2KgCOD/m~3·d,液料滞留期(SRT)14～20天,取得了良好的处理效果。COD去除率稳定在90％左右,BOD_5去除率达到95％以上,产气率达到0.49m~3/去除KgCOD。     

42CrMo钢离子氮化—沉淀强化组织结构的研究

研究了42CrMo钢离子氮化—沉淀强化的组织结构,结果表明,离子氮化层的组成为ε、r＇a_N、Fe_3C和少量Cr_2N、Mo_2N、CrMoN_x及a";经时效处理后,ε相和a_N相弥散析出Cr_2N、Mo_2N和a" 。325℃时效,CrMoN_x消失;500℃时效,Mo_2N大大减少。a"、Cr_2N和Mo_2N弥散共格析出,必将使氮化层强化。     

对混合Abel群中一定理证明的改进

本文指出了A.T.库洛什“群论”(上)书中一定理证明的错误,并给出了正确的证明。     

水泥黄土增强措施初探

在分析资料和室内试验的基础上,概括了提高水泥黄土强度有效措施,就水泥黄土硬化和外加剂对水泥黄土的作用机理进行了初步探讨。     

Rapid cold hardening process of insects and its ecologically adaptive significance

In contrast to overwintering cold hardening, a rapid cold hardening process has recently been described in insects. This process can rapidly enhance cold tolerance of insects in several hours or even minutes. The characteristics of rapid cold hardening include inducing conditions, cold hardening effects, and fitness costs. Physiological and biochemical mechanisms of rapid cold hardening include rapid changes in the phospholipid composition and the increase in hemolymph osmolalities, polyols production, proline and cold-induced proteins. Moreover, there are different views about the ecologically adaptive significance of rapid cold hardening in insects. This paper reviews research results about rapid cold hardening of insects since 1987, focusing on forms of cold injury, strategies of cold tolerance, and definitions, characteristics, physiological and biochemical mechanisms and adaptive significance of rapid cold hardening.     

一种薄壁矩形管弯曲胎具的设计

介绍了一种薄壁矩形管弯曲胎具。利用金属材料弯曲变形时的塑变硬化特性来弯曲矩形管,较好地解决了雨阳棚骨架现场弯曲加工的问题。