Maxwell's role in turning the concept of model into the methodology of modeling

This is a contribution towards a history and philosophy of modeling in its early stages in electromagnetism. In 1873, James Clerk Maxwell (1831–1879) hinted at the methodology of modeling at the end of his Treatise on Electricity and Magnetism. We focus on Maxwell's impact on physicists who immediately followed him, specifically Oliver Lodge (1851–1940) and George Francis FitzGerald (1851–1901). We begin with the role that the scientific concept of model played in the late nineteenth century, as assessed by Ludwig Boltzmann (1844–1906). We then discuss the role of hypothesis as a methodology, the appeal to (dynamical) illustration, and the way Maxwell applied model and working model in his studies of electromagnetism. We show that for Maxwell these key terms were kept distinct, but Lodge did not maintain these distinctions and, in this regard, FitzGerald followed Lodge. Notwithstanding Lodge's influence, Fitzgerald modified Maxwell's theory based on the mechanical model he designed, thereby implicitly taking the first step towards modeling. This methodology consists in drawing consequences from the (mechanical) model to the (electrodynamic) theory and modifying the latter in light of the functioning of the former. At the core of our argument is the thesis that it was a methodological novelty to move from the concept of model to the methodology of modeling. The introduction of modeling as a new methodology into physics in the late nineteenth century was a major event which deserves proper recognition.     

Effect of Al on microstructure and mechanical properties of as-extruded Mg–1Mn alloy sheet

The effect of Al addition on microstructure and mechanical properties of hot extruded Mg–1 Mn alloy sheet was investigated. The results revealed that the dynamic recrystallization was promoted by increasing Al content. The ultimate tensile strength and yield strength of the alloy increased with the increase of Al content. The Mg–9 Al–1 Mn alloy exhibited the highest strength, with tensile strength of 308 MPa, 307 MPa, 319 MPa, yield strength of 199 MPa, 207 MPa, 220 MPa and the elongation of 20.9%, 20.1%, 19.2% in 0°, 45°, 90°, respectively.The high strength was mainly attributed to the formation of fine dynamically recrystallized grains and large amounts of the second phase. The strengthening mechanism of the alloys was explained.     

Microstructure,mechanical properties and wear resistance of an Al–Mg–Si alloy produced by equal channel angular pressing

Microstructure, mechanical properties and wear resistance in an ultrafine-grained Al–Mg–Si alloy fabricated utilizing a combination of equal channel angular pressing (ECAP) and dynamic aging were investigated in this paper. The results indicated that the grain size of the ECAP alloy was significantly refined, i.e., to ~239 nm after three ECAP passes. Meanwhile, the yield and tensile strength of the ECAPed material reached 340 MPa and 445 MPa, respectively, while maintaining a significant uniform elongation of 14%. Wear resistance results demonstrated that the wear rate, wear depth and width of the ECAPed material decreased in comparison with the solution-treated (SST) and peak-aged (T6) conditions under a load range of 5–25 N. The adhesive wear that occurs in the undeformed specimens at 10 N does not appear in the ECAPed specimen at the same load, indicating that the ECAPed specimen delay the appearance of more serious wear mechanisms under certain loads. The cooperative interaction of high density nano-scale β" precipitates and dislocations resulted in a combination of super-high strength and good work hardening ability which suppressed the extension of cracks between the friction layer and the plastic deformation zone. As a consequence, the combination of ECAP and dynamic aging brings a significant improvement for antifriction performance of the 6061 aluminum alloy.     

土壤肥料学实验课程的教学改革与实践

为全面培育卓越农林人才，提高教学培养质量，本研究结合土壤肥料学的课程内容、教学特点及实验方法，对存在的问题进行了剖析，并结合实际针对存在问题做出了相应改革，适时调整《土壤肥料学》实验课程内容和形式。通过删减验证性实验内容，增设综合性实验，传统部分教学内容实现网络化等三方面对该课程的实验课部分进行了改革与实践，以期提高学生综合运用所学《土壤肥料学》的相关知识来解决生产实际问题的能力。     

Effect of heat treatment on microstructures and properties of a novel Al-Zn-Mg-Cu alloy for oil drilling

In view of the special requirements for strength, heat resistance and corrosion resistance of Al-Zn-Mg-Cu alloy for oil drilling, the Al-6.2 Zn-2.5 Mg-1.6 Cu alloy was prepared by increasing Cu content on basis of Russian Series 1953 alloy. The effect of heat treatment on the microstructures and properties of the alloy was characterized by optical microscope(OM), scanning electron microscope(SEM) and transmission electron microscope(TEM), and investigated by tensile test at room temperature, thermal exposure test and corrosion test. The results show that the strength after T6 aging treatment exhibit a decrease trend as an increase of the solution temperature from465 °C to 480 °C. After the solution treated by the rate of 470 °C/1 h, second phases dissolve into the matrix very well and the strength property reaches optimum. The alloy has better comprehensive properties treated by a solution treatment of 470 °C/1 h and then followed by an aging treatment of 120 °C/24 h + 170 °C/1 h + 120 °C/24 h. Under the aging state, the precipitated phases inside the grains are suitable in size, while on the grain boundary distribute discontinuously and the precipitate-free zone is obvious. Besides, the alloy still maintain high tensile properties. The yield strength, tensile strength and elongation are 650 MPa, 686 MPa,12.0%, respectively. The yield strength retention after heat exposure is 92%. The alloy has good corrosion resistance and the exfoliation corrosion degree. The average corrosion rate in the H_2S and CO_2 environment is 0.0024 mm/a, which is far less than the required 0.12 mm/a. It is insensitive to H_2S and CO_2 environments.     

论体育学院网球专选课教学改革

对体育学院网球专选的学生技术进行了分类，同时又对网球专选课教学现状进行了分析，提出了教学改革的措施．     

女大学生排球选修课教学之我见

本文依据大学生生理、心理的阶段特征，通过变换组织教法以及增强学生主体、教师主导的双边作用，分析排球课的项目特点。使技能学习和人格发展相结合，培养身心健康发展的大学生。     

河道电磁波三角高程测量中大气折光系数的变化与分析

通过对滹沱河河道电磁波三角高程测量中K值(大气折光系数)变化的分析，总结出该地区K值的变化规律，并提出三角高程测量中应注意的问题。     

论《化学》课在高职教育中的作用及改革

当前许多学校削弱化学课的教学，这必将对学生素质的培养产生长远的负面影响。为了适应时代发展的需要，化学课教学必须深化改革。在教学内容上，适当降低理论高度；根据本专业的需要以及社会关注的热点，选择应用性强、新科技含量高的基本知识；提高实验课的比例和效果。在教学方法上，注意调动学生主动学习的积极性，使学生在学习的过程中，知识水平和能力得以同步提高。     

高师武术普修课分块教学的实验研究

采用实验对比的方法 ,探讨武术普修课分块教学的可行性效果 .结果表明 ,武术普修课采用分块教学是可行的 ,且使学生的学习目的性更加明确 ,提高了教学效果