FeCo-based hybrid MOF derived active species for effective oxygen evolution

Metal-organic frameworks(MOFs) have been regarded as promising catalyst materials due to the richness of coordinately unsaturated metal sites on the surface,which can act as catalytic active centres.In this study,a hybrid MOF material composed of Fe-based MOF and Co-based MOF was prepared with the involvement of graphene oxide nanosheets as additive.It was demonstrated that the hybrid MOF materials showed much higher electro-catalytic activity towards oxygen evolution than the single-phase counterparts.To drive current density of 10 mA cm~(-2),the hybrid CoFe-based MOF only needed an over potential of 290 mV in 1 M KOH.The catalytic activity could sustain for a longer time with only slight current density decrease.During oxygen evolution operation,the MOF catalyst evolved into catalytic active species but kept well the microscale sheet-like structure.It is thus believed that this study will provide an avenue for the development of advanced electrocatalysts.     

Acyl-chloride functionalized graphene oxide chemically grafted with hindered phenol and its application in anti-degradation of polypropylene

In this study,graphene oxide (GO) nanosheets were first functionalized by the acyl-chloride reaction and then reacted with hindered phenol (HP) to obtain HP grafted GO (GO-g-HP).The GO-g-HP prepared under the optimized condition exhibited a high efficiency against both thermal and photo oxidation of isotactic polypropylene (iPP).GO-g-HP exhibited a much better anti-aging efficiency than that of HP and GO used individually or that of their physical mixture.The outstanding anti-aging effect of GO-g-HP was attributed to the excellent synergistic effect produced between the chemically bonded GO and HP,which resulted in an improved oxygen barrier property of GO and excellent utilization of the free radical scavenging capability of GO and HP.Also,thanks to the grafting of HP on GO,the physical loss of HP,which was one of the main shortcomings for traditional small molecular antioxidants,was largely suppressed.It is expected that the GO-g-HP prepared can well meet the requirement of long-term applications of polymers in some harsh service conditions.     

燃料添加剂对柴油机烟粒燃烧的影响

考察了燃料添加剂对降低柴油机烟粒燃点温度的效应。含金属添加剂的柴油机烟粒被收集在金属纤维过滤器上,把原状烟粒样品移入实验室反应器,用模拟柴油机排气进行燃烧试验。实验结果表明,当烟粒中含有Pd或Cu时,烟粒的燃点温度可降至430℃左右(普通柴油机烟粒的燃点温度约600℃);Pd的添加还可大大降低烟粒一次燃烧产物中CO的分率。文中还对金属(催化剂)/烟粒接触程度和添加剂溶液中可燃性部分对烟粒燃烧的影响作了讨论。     

双层钙钛矿Sr2FeMoO6，Ba2FeMoO6的电磁性质研究

分析了双层钙钛矿结构的锰氧化合物Sr2FeMoO6,Ba2FeMoO6物相结构和电磁学性质,对巨磁阻效应进行了探讨,揭示了Sr2FeMoO6样品为半导体导电性,Ba2FeMoO6样品为金属导电性.     

椭圆偏振法研究四方氧化锆对Zr-Sn-Nb合金氧化膜耐腐蚀性能的影响

将经过不同热处理的Zr-Sn-Nb合金样品放在350℃、16．8mol／LPa、0．01mol／LLiOH溶液的高压釜中进行腐蚀。用椭圆偏振法研究氧化膜中的四方氧化锆，发现经过580℃／冷轧／500℃处理的样品在腐蚀42天和190天后氧化膜中的四方氧化锆比其它样品的多。四方氧化锆是影响合金耐腐蚀性能的一个主要因素，四方氧化锆的形成有利于提高合金的耐腐蚀性能。     

偏硼酸钠与镁和氢反应的硼氢化钠生成

高的氢压和反应温度有利于片硼酸钠与镁和氢反应生成硼氢化钠，但温度接近镁的熔点时不利于硼氢化钠的生成。在反应物中添加铁、镍和钴将加速硼氢化钠的生成，而铜的加入却阻碍硼氢化钠的生成。     

纳米固体超强酸SO42-/ZnO催化合成乙酸异戊酯的研究

本文利用纳米固体超强酸SO4^2-/ZnO催化合成乙酸异戊酯的最佳反应条件,既反应时间2.0h,催化剂用量为酸质量的1.0%,酸醇比为1∶2,验证实验产率为96.7%,且该实验反应时间短,无腐蚀无污染,催化剂可回收可重复利用.     

选择性催化氧化H2S的催化剂研究

在考察了几种单组分氧化物把硫化氢催化氧化为单质硫的基础上，采用共沉淀法合成了3种复合氧化物催化剂A，B，C，并考察了它们的催化活性和选择性．结果表明，在一定条件下，催化剂B的转化率和选择性分别在90％和97％以上，在40h的催化性能稳定性测试中，其转化率和选择性均能保持稳定，具有良好的催化性能．     

固体超强酸催化剂研究进展

概括介绍了固体超强酸催化剂的合成进展，并对固体超强酸催化剂在有机合成反应中的应用做了简要评述．     

甲醇催化脱氢制甲酸甲酯反应中Cu－ZnO－ZrO_2／SiO_2催化剂的特性

Ｃｕ－ＺｎＯ－ＺｒＯ２／ＳｉＯ２催化剂对甲醇催化脱氢制甲酸甲酯的反应具有良好的活性和选择性．应用连续微反、差示热分析、Ｘ射线衍射、程序升温还原、Ｘ射线光电子能谱分析和红外光谱等技术，对该催化剂的活性中心本质、ＺｎＯ及ＺｒＯ２的助催化作用、可能的反应机理以及催化剂的失活原因进行了探讨．