四螺旋创新集群:研究型大学人工智能发展生态重构与路向探究——以加拿大多伦多大学为例

以人工智能为代表的知识迭代发展,促使知识生产模式发生重大转变,催生了“大学—产业—政府—公众”四螺旋动力结构的建立和研究型大学知识生产新生态重构。以多伦多大学人工智能发展为例,考察其四螺旋利益相关主体及实践。从内在机理看,4个主体在互动运作中不仅重新确定了各自角色,而且还建立了大学(知识)—产业(产品)—政府(治理)—公众(公益)的新型逻辑链条,平衡公私利益格局,把公益指向作为人工智能四螺旋运作的中心目标;从外在特征看,4个主体形成了以大学为中心的区域创新网络,并牵引其他主体形成环高校创新集群。当前,我国在人工智能发展中不断发力,已进入世界第一方阵,但仍需要在国际比较学习中不断提升自身竞争力。基于案例分析,我国研究型大学发展人工智能有必要把握4个方面:一是走进中心,塑造大学在人工智能发展中的领导地位;二是以专促通,创新研究型大学人工智能专业培养模式;三是引企入研,提升校企合作人工智能创新的转化升级;四是人本导向,突出大学在人工智能发展中的公共价值。总体来看,我国研究型大学发展人工智能不仅要面临技术上的挑战,更要面临来自治理的挑战。     

Microstructure,mechanical properties and wear resistance of an Al–Mg–Si alloy produced by equal channel angular pressing

Microstructure, mechanical properties and wear resistance in an ultrafine-grained Al–Mg–Si alloy fabricated utilizing a combination of equal channel angular pressing (ECAP) and dynamic aging were investigated in this paper. The results indicated that the grain size of the ECAP alloy was significantly refined, i.e., to ~239 nm after three ECAP passes. Meanwhile, the yield and tensile strength of the ECAPed material reached 340 MPa and 445 MPa, respectively, while maintaining a significant uniform elongation of 14%. Wear resistance results demonstrated that the wear rate, wear depth and width of the ECAPed material decreased in comparison with the solution-treated (SST) and peak-aged (T6) conditions under a load range of 5–25 N. The adhesive wear that occurs in the undeformed specimens at 10 N does not appear in the ECAPed specimen at the same load, indicating that the ECAPed specimen delay the appearance of more serious wear mechanisms under certain loads. The cooperative interaction of high density nano-scale β" precipitates and dislocations resulted in a combination of super-high strength and good work hardening ability which suppressed the extension of cracks between the friction layer and the plastic deformation zone. As a consequence, the combination of ECAP and dynamic aging brings a significant improvement for antifriction performance of the 6061 aluminum alloy.     

地理国情普查地表覆盖内业解译的质量问题研究

地表覆盖内业解译是地理国情普查的一道重要工序。地理国情地表覆盖内业解译现存图斑平面位置精度不足、分类错误多种多样等普遍问题,问题突出典型。文中针对这些问题图文并茂、清晰明了的进行了说明,并从多方面分析问题产生的原因,提出加强对技术指标和采集原则的学习和理解,加强内业与外业的结合,充分发挥解译样本的作用等建议,以有效提高内业解译的质量。     

Effect of heat treatment on microstructures and properties of a novel Al-Zn-Mg-Cu alloy for oil drilling

In view of the special requirements for strength, heat resistance and corrosion resistance of Al-Zn-Mg-Cu alloy for oil drilling, the Al-6.2 Zn-2.5 Mg-1.6 Cu alloy was prepared by increasing Cu content on basis of Russian Series 1953 alloy. The effect of heat treatment on the microstructures and properties of the alloy was characterized by optical microscope(OM), scanning electron microscope(SEM) and transmission electron microscope(TEM), and investigated by tensile test at room temperature, thermal exposure test and corrosion test. The results show that the strength after T6 aging treatment exhibit a decrease trend as an increase of the solution temperature from465 °C to 480 °C. After the solution treated by the rate of 470 °C/1 h, second phases dissolve into the matrix very well and the strength property reaches optimum. The alloy has better comprehensive properties treated by a solution treatment of 470 °C/1 h and then followed by an aging treatment of 120 °C/24 h + 170 °C/1 h + 120 °C/24 h. Under the aging state, the precipitated phases inside the grains are suitable in size, while on the grain boundary distribute discontinuously and the precipitate-free zone is obvious. Besides, the alloy still maintain high tensile properties. The yield strength, tensile strength and elongation are 650 MPa, 686 MPa,12.0%, respectively. The yield strength retention after heat exposure is 92%. The alloy has good corrosion resistance and the exfoliation corrosion degree. The average corrosion rate in the H_2S and CO_2 environment is 0.0024 mm/a, which is far less than the required 0.12 mm/a. It is insensitive to H_2S and CO_2 environments.     

“百病生于气”疾病观的针灸临床应用

 “百病生于气”见于《素问·举痛论》，几千年来始终是中医临床认识疾病、防治疾病的重要理论依据之一。对气的含义及气机失调致病的机制进行了梳理，得出了“百病生于气”的基本含义可以概括为气机失调是疾病发生的基本病机的结论，情志因素、精神心理是导致疾病发生的重要内因。分析认为“百病生于气”的理论对于针灸临床有重要指导意义，针灸诊疗过程中应注重“调气”“调神”，这是针灸取得佳效的根本保障。     

南方丝绸之路对大理的影响及当前的对策

大理历史悠久,文化灿烂,风光秀丽,古道纵横。过去南方丝绸之路对大理的经济、政治、交通、文化、宗教等有较大的影响,今天在国家"一带一路"的大战略背景下,大理应该怎么办,大理学院应该怎么办,这是当代学人的新课题。以古代南方丝绸之路为出发点,建议今天大理的"一带一路"定位为交往之路、人情之路。     

城市治理首要应加强市民的思想道德建设——以湛江市治理交通秩序为例

交通混乱既影响城市形象,又制约经济发展。本文通过对湛江市区交通混乱现象进行深入调查研究,认为要从根本上改变这一现状,取得长效成果,除了采取行政立法、经济处罚、改善交通基础设施等治理措施外,还应着重加强市民的道德建设,提高其思想道德素质,培养市民良好的社会道德行为习惯。文章旨在为加强湛江市民道德建设,解决湛江及其它城市突出交通问题提供参考。     

有限交换p-群中加性码的计数

解决了有限交换p-群中加性码的两类计数问题,第一类计数问题是指求任意给定的有限交换p-群中任意类型码的数目,第二类计数问题是指求包含同一类型码的有限交换p-群的数目以及它们分别所含有的该类型码的数目.     

自然地理野外实习研究

关于自然地理野外实习的研究,大多侧重于实习模式、实习基地建设等方面,针对具体的过程、效果评价等研究不足.本文以聊城大学自然地理野外实习为例进行探析,运用建构主义的观点提出了影响实习效果的五大因素以及相关对策,对野外实习改革具有一定的理论意义.     

非同分布φ混合序列加权和的强极限收敛性

利用φ混合序列矩不等式和截尾的处理方法,研究非同分布φ混合序列加权和强极限收敛性质的问题,得到了若干新结果,推广并改进了独立同分布情形下的相应结果.