Effect of heat treatment on microstructures and properties of a novel Al-Zn-Mg-Cu alloy for oil drilling

In view of the special requirements for strength, heat resistance and corrosion resistance of Al-Zn-Mg-Cu alloy for oil drilling, the Al-6.2 Zn-2.5 Mg-1.6 Cu alloy was prepared by increasing Cu content on basis of Russian Series 1953 alloy. The effect of heat treatment on the microstructures and properties of the alloy was characterized by optical microscope(OM), scanning electron microscope(SEM) and transmission electron microscope(TEM), and investigated by tensile test at room temperature, thermal exposure test and corrosion test. The results show that the strength after T6 aging treatment exhibit a decrease trend as an increase of the solution temperature from465 °C to 480 °C. After the solution treated by the rate of 470 °C/1 h, second phases dissolve into the matrix very well and the strength property reaches optimum. The alloy has better comprehensive properties treated by a solution treatment of 470 °C/1 h and then followed by an aging treatment of 120 °C/24 h + 170 °C/1 h + 120 °C/24 h. Under the aging state, the precipitated phases inside the grains are suitable in size, while on the grain boundary distribute discontinuously and the precipitate-free zone is obvious. Besides, the alloy still maintain high tensile properties. The yield strength, tensile strength and elongation are 650 MPa, 686 MPa,12.0%, respectively. The yield strength retention after heat exposure is 92%. The alloy has good corrosion resistance and the exfoliation corrosion degree. The average corrosion rate in the H_2S and CO_2 environment is 0.0024 mm/a, which is far less than the required 0.12 mm/a. It is insensitive to H_2S and CO_2 environments.     

Research on the Efficiency Evaluation for the Board Based on GT-AHP Method

The board of directors is the core of corporate governance mechanism. In order to enhance the operation efficiency of the board, and to further reduce the agency cost, effective appraisal of the efficiency of the board becomes urgent. This paper firstly uses graph transformation and matrix algorithm to analyze the performance evaluation factors of the board and establishes the ordered hierarchy structure of the appraisal indexes. Then, it calculates the index weights with the AHP method. Next, it sets up the efficiency appraisal index system of the board. At last, the paper gives an empirical analysis with an example.     

泵站运行效率分析与节能措施

从泵站的电耗入手，讨论和分析了泵站机组实际运行工况与设计工况的偏离．并通过机组电耗和效率分析，提出了若干节能措施。     

基于多目标规划的模糊DEA有效性

传统的DEA模型是通过单目标的线性规划来处理刚性数据，为了更好地评价决策单元的相对有效性问题，在多目标规划的基础上，建立了模糊DEA模型，通过取截集的方法，得到相应的悲观规划和乐观规划，并分别求得与之相应的线性规划(P2)的最优值，由此可以得到更多的关于决策单元的投入和产出情况的信息，还讨论了它们的一些性质，并用数值实例加以说明。     

提高风险投资过程中两级委托—代理效率的思考

本文从对风险投资者与风险投资商、风险投资商与风险企业之间的两层委托代理的简要分析入手 ,首先在诠释委托—代理效率内涵的基础上构建了分析委托—代理效率的一个理论框架 ,并应用此框架对如何提高上述两层委托—代理关系的效率问题进行了探讨     

科技论文中“关键词”的标引方法

从关键词在文献检索中的重要作用论述了科技论文的发表，必须重视关键词的标引．明确指出出版专业中关键词的概念，探讨了不同标引方法的利弊，介绍了关键词的标引方法．     

任意循环的卡诺循环分解的综合讨论

综合讨论了任意循环的两种卡诺循环分解法 ,指出不能采用“串联”分解法来证明任意循环效率的极限 ,但可用这两种分解法来证明克劳修斯等式和不等式 ,同时指出了一些文献在涉及该问题时所存在的不妥之处。     

工程哲学与神东亿吨矿区创新实践

工程哲学指导工程实践。神东矿区在煤矿开发建设创新实践中遵循“系统性、客观性、时效性”的理性思维，系统思考，整体推进，寻找主客观最佳结合，及时掌握和集成新技术、新材料、新装备、新工艺，建设了不同于传统模式的千万吨矿井，建成世界上首个亿吨级煤炭生产基地。全员工效、生产规模、安全、环保水平、资源回收率等指标达到国际领先水平。     

Polarized Emission of Molecular Film With Lanthanide (Ⅲ) Complex

1 Results In the coordination system by using complexation with organic ligand, the ff emission of lanthanide(Ⅲ) (Ln(Ⅲ)) is induced the excitation energy transfer form the organic chromophore under the light-irradiation. However, there are not so much number of reports to discuss the energy relaxation mechanism in such complexes with Ln(Ⅲ). Recently, we succeeded firstly to estimate the rate constant of the energy transfer between the ligand and Ln(Ⅲ) in Pr(Ⅲ)-phenanthroline analogs[1]. Here, we will di...     

双DC-DC变换器在爆闪式警示信号灯上的应用

本文探讨利用双DC-DC变换器去解决单级DC-DC变换器在宽电压范围工作时开关效率降低,开关器件不能正常工作,甚至损坏的问题。在现有信号灯的基础上,设计出一种寿命长、适应宽电压范围、功能齐全,便于生产、管理、使用、维修的爆闪式警示信号灯。