Effect of heat treatment on microstructures and properties of a novel Al-Zn-Mg-Cu alloy for oil drilling

In view of the special requirements for strength, heat resistance and corrosion resistance of Al-Zn-Mg-Cu alloy for oil drilling, the Al-6.2 Zn-2.5 Mg-1.6 Cu alloy was prepared by increasing Cu content on basis of Russian Series 1953 alloy. The effect of heat treatment on the microstructures and properties of the alloy was characterized by optical microscope(OM), scanning electron microscope(SEM) and transmission electron microscope(TEM), and investigated by tensile test at room temperature, thermal exposure test and corrosion test. The results show that the strength after T6 aging treatment exhibit a decrease trend as an increase of the solution temperature from465 °C to 480 °C. After the solution treated by the rate of 470 °C/1 h, second phases dissolve into the matrix very well and the strength property reaches optimum. The alloy has better comprehensive properties treated by a solution treatment of 470 °C/1 h and then followed by an aging treatment of 120 °C/24 h + 170 °C/1 h + 120 °C/24 h. Under the aging state, the precipitated phases inside the grains are suitable in size, while on the grain boundary distribute discontinuously and the precipitate-free zone is obvious. Besides, the alloy still maintain high tensile properties. The yield strength, tensile strength and elongation are 650 MPa, 686 MPa,12.0%, respectively. The yield strength retention after heat exposure is 92%. The alloy has good corrosion resistance and the exfoliation corrosion degree. The average corrosion rate in the H_2S and CO_2 environment is 0.0024 mm/a, which is far less than the required 0.12 mm/a. It is insensitive to H_2S and CO_2 environments.     

循环作用对马蹄寺石窟群岩体性能的影响

马蹄寺石窟群地处河西走廊中部,气候条件十分恶劣。由于常年受到温度、湿度、酸碱盐等作用的影响,石窟岩体性能出现了不同程度的劣化现象。通过开展室内模拟试验,研究以上多种恶劣环境的循环作用对于岩体抗压强度、波速、质量的影响规律,同时使用X射线衍射仪(X-ray diffraction,XRD)、X射线荧光光谱(X-ray fluorescence,XRF)和扫描电子显微镜(scanning electron microscope,SEM)对循环作用过程中样品的矿物组分、元素含量和微观形貌进行分析研究。研究结果表明,循环作用使样品中的长石类矿物和方解石含量降低,黏土类矿物含量增加,胶结程度下降,孔隙逐渐发展成为横向微裂隙,导致样品的性能出现不同程度的劣化现象。循环作用对岩体性能的影响程度从大到小依次为冻融循环、耐盐循环、耐碱循环、耐酸循环和温湿循环。     

三维光盘存储系统中双光头同步控制的频域分析与辨识

详细介绍了双光头同步控制原理.对采集的伺服模块聚焦误差跟踪信号及共焦模块读写光头的聚焦线圈驱动信号进行了频域分析,并以此两路信号作为系统输入输出,分别对三种参数模型进行参数优化.根据3种模型的频率响应及阶跃响应,选择双光头同步控制过程的参数模型为[450]阶的ARX模型.实测曲线与模型仿真结果符合度(fit)为78.0259%.     

对摩擦力作功与摩擦生热的量度的认识

本文通过对摩擦力作功与不擦生热的讨论，给出摩擦生热的量度方法．     

Carbon Nanotubes:from Nanoscale Building Blocks to Macrostructures

1 Results Carbon nanotubes (CNTs) have fascinating properties.In order to use these novel one-dimensional structures for applications such as in nano-electronic,nano-mechanical and electrochemical energy storage device and as structural elements in various composites,the structure of nanotubes needs to be tailored and various architectures and macroscale assembles have to be configured using nanotube building blocks.Nanotube macrostructures are macroscopically organized groups of CNTs,which are expecte...     

带参模糊关系合成

该文对广义λ-并算子的性质作了进一步的研究,利用该算子对通常的模糊关系合成进行了推广,提出一种带参的模糊关系合成,并给出了它的若干性质。     

韭菜凝集素的纯化及部分性质的研究

用葡聚糖凝胶柱层析法从韭菜的叶片组织分离出一种对新鲜兔红细胞有强烈凝集作用的凝集素，ＰＡＧＥ鉴定和高碘酸－Ｓｃｈｉｆｆ试剂反应均显单一条带。ＳＤＳ－ＰＡＧＥ分析表明该凝集素含有３个亚基，其相对分子质量分别约为３１０００、２４０００和２１０００。韭菜凝集素具有一定的热稳定性，在酸、碱处理中该凝集素对碱处理较酸处理稳定，氨基酸组成分析表明韭菜凝集素含有１４种氨基酸，其中半胱氨酸含量较高。     

大学生英语写作常见错误分析

目前我国大学生的英语写作能力及写作水平普遍偏低，尚缺乏一定的书面交际能力，为此，重视英语写作课教学，加强对学生语言基础知识的训练，帮助他们分析并克服英语写作中的常见语言错误，是迅速提高他们的英语表达能力及交际能力，适应对外交际需求的当务之急。     

地下含水层热储井位置选择和布置

地下含水层热储开发技术面临一系列问题,寻找适合热储用的含水层和合理布置热储井是解决问题的第一步.综合考虑含水层的地质结构特征,适合热储的含水层应该是承压含水层,热储应该采用同层方式.单个热储井的影响半径可以通过热平衡和热扩散原理求得.合理布置热储井间的相对位置,可以有效抵消原有地下水的流动以及渗流系数不一致的影响.利用井之间的渗流耦合作用,在热储井之间布置调节井,主动控制热储水的波及范围,可以实现热储井布置的相对"紧凑".