Effect of heat treatment on microstructures and properties of a novel Al-Zn-Mg-Cu alloy for oil drilling

In view of the special requirements for strength, heat resistance and corrosion resistance of Al-Zn-Mg-Cu alloy for oil drilling, the Al-6.2 Zn-2.5 Mg-1.6 Cu alloy was prepared by increasing Cu content on basis of Russian Series 1953 alloy. The effect of heat treatment on the microstructures and properties of the alloy was characterized by optical microscope(OM), scanning electron microscope(SEM) and transmission electron microscope(TEM), and investigated by tensile test at room temperature, thermal exposure test and corrosion test. The results show that the strength after T6 aging treatment exhibit a decrease trend as an increase of the solution temperature from465 °C to 480 °C. After the solution treated by the rate of 470 °C/1 h, second phases dissolve into the matrix very well and the strength property reaches optimum. The alloy has better comprehensive properties treated by a solution treatment of 470 °C/1 h and then followed by an aging treatment of 120 °C/24 h + 170 °C/1 h + 120 °C/24 h. Under the aging state, the precipitated phases inside the grains are suitable in size, while on the grain boundary distribute discontinuously and the precipitate-free zone is obvious. Besides, the alloy still maintain high tensile properties. The yield strength, tensile strength and elongation are 650 MPa, 686 MPa,12.0%, respectively. The yield strength retention after heat exposure is 92%. The alloy has good corrosion resistance and the exfoliation corrosion degree. The average corrosion rate in the H_2S and CO_2 environment is 0.0024 mm/a, which is far less than the required 0.12 mm/a. It is insensitive to H_2S and CO_2 environments.     

具粘性双曲型方程组解的整体存在性

对于具粘性双曲型方程组Cauchy问题，通过引进Lax熵-熵流对的方法，得到了解的整体存在性，利用补偿紧致的方法证明了L∞逼近解的收敛性.     

对摩擦力作功与摩擦生热的量度的认识

本文通过对摩擦力作功与不擦生热的讨论，给出摩擦生热的量度方法．     

Simulation of Weld Depth in A-TIG Welding with Unified Arc-electrode model

Ｉｔｋｎｏｗｎｔｈａｔｓｍａｌｌａｍｏｕｎｔｓｏｆｆｌｕｘｏｎｔｈｅｓｕｒｆａｃｅｏｆｓｔａｉｎｌｅｓｓｓｔｅｅｌｃａｎｉｎｃｒｅａｓｅｔｈｅｄｅｐｔｈｏｆｗｅｌｄｐｅｎｅ ｔｒａｔｉｏｎｉｎＴＩＧｗｅｌｄｉｎｇｂｙａｆａｃｔｏｒｏｆｔｈｒｅｅ[1] .Ｔｈｉｓｐｒｏｃｅｓｓｉｓｒｅｆｅｒｒｅｄｔｏａｓ”ＡＴＩＧ”ｏｒＴＩＧｗｅｌｄｉｎｇａｃｔｉ ｖａｔｅｄｂｙｆｌｕｘ .Ｔｈｅｒｅｈａｖｅｂｅｅｎｔｈｒｅｅｐｕｂｌｉｓｈｅｄｐｈｙｓ ｉｃａｌｍｅｃｈａｎｉｓｍｓｔｈａｔａｒｅｐｏｓｓｉｂｌｅｃｏｎｔｒｉ…     

红外光谱中低光能通量光谱测量方法研究

对一些低光能通量的红外光谱测量方法进行了初步探讨，采用减光法使低透过率物质的光谱质量得到了提高，并与纵标扩大法得到的结果进行了比较和讨论，证明减光法比纵标扩大法有很大的优越性．     

高斯定理的拓广

引入广义曲面积分的概念，并讨论在闭合曲面上有奇点的条件下，电场穿过闭合曲面的电通量，从而给出高斯定理的一个推广。     

NSRL-XAFS光束线弧矢聚焦双晶单色器设计

针对XAFS光束线能量动态扫描的实验特点，介绍了弧矢聚焦双晶单色器的物理设计：包括晶体光学结构、性能参数计算、晶体热载分析和弧矢弯曲原理．弧矢缩比选择为1：4．88，水平接收角由原来的1mrad拓宽到3mrad，在不改变基本配置的情况下，获得了样品上束癍缩小、光子通量高达半个量级以上的增益．     

电工学中交变电流一些难点释疑

对电工学中有关交变电路学习的一些难点,如交流电的有效值,电感、电容对交变电流的作用,感应电动机的工作原理及输电等进行了阐述。     

双门电冰箱的热传导问题

本文将根据热传导方程,对电冰箱达定态过程进行理论推导,以及定态后电冰箱单位时间吸收的热量,并由此计算出由于冰箱箱体的热量泄漏而消耗的能量。     

金属工件内部残余应力的振动消除研究

本文针对传统的消除金属工作内部残余应力的热时效处理法的不足，从激振角度，运用材料力学、动力学中的振动理论等知识，并通过大量试验验证，研究了振动消除应力的方法－－振动时效法的原理及其有关问题。说明这种新的方法具有节能、高效等一系列优点。