基于模型的汽油机电子节气门控制器设计

摘要： 建立了电子节气门系统模型，并通过系统辨识方法得出模型参数.根据被控电子节气门的摩擦力和非线性回位弹簧模型，设计了前馈非线性补偿控制器.将经过前馈非线性补偿后的电子节气门系统简化成线性系统，并对该线性系统进行H无穷控制器的设计.对设计的H无穷控制器进行离散化，并加入比例控制环节来弥补控制器离散化导致的性能下降.经过试验验证，在前馈非线性补偿器、H无穷控制器和比例控制的作用下，被控电子节气门的性能达到了设计需求.     

冷轧带钢局部高点卷取过程起筋控制的建模与仿真

为了研究带钢局部高点卷取起筋的控制方法，利用三维弹塑性变形基本理论，并引入带钢塑性流动因子，建立了弹塑性卷取应力和起筋量模型.基于应力函数假设、S. Timoshenko最小功原理和伽辽金虚位移法建立了起筋带钢的应力场分布和可用于在线计算的起筋临界卷取张力设定模型.仿真结果表明：局部高点在径向累积叠加所引起的带钢张力不均匀分布和轴向压应力是导致带钢起筋的主要原因；起筋量随局部高点高度、卷径和卷取张力增加而增大，薄带钢比厚带钢起筋量增幅明显；临界卷取张力随卷径、带钢厚度和局部高点高度增大而减小.     

梯度网络平稳点集合的Hopfield稳定性与吸引域

给出梯度神经网络模型的电路实现 ,证明了网络平稳点集合的全局 Hopfield稳定性。对各个平稳点吸引域的几何估计得到了相关结果 ,这为网络初始输入的数量与方向判定提供了基本的量度参数准则。     

矩形型钢弯曲回弹曲率半径r值的确定

文章在分析矩形型钢弯曲变形过程及应力与应变等方面的关系的基础上，推导出工件曲率半径与工件回弹后曲率半径之间的关系，从而确定了凸模半径。     

The controlling factors and distribution prediction of H2S formation in marine carbonate gas reservoir, China

Generally, there are some anhydrites in carbonate reservoir, as H2S is also familiar in carbonate oil and gas reservoirs. Nowadays, natural gas with high H2S concentration is usually considered as TSR origin, so there is close relationship between H2S and anhydrite. On the contrary, some carbonate rocks with anhydrite do not contain H2S. Recently, researches show that H2S is only a necessary condition of H2S formation. The reservoir porosity, sulfate ion content within formation water, reservoir temperature, oil/gas and water interface, hydrocarbon and some elements of reservoir rock have great controlling effects on the TSR occurrence. TSR deoxidizes hydrocarbon into the acidic gas such as H2S and CO2, and the H2S formation is controlled by TSR occurrence, so the relationship among reaction room, the contact chance of sulfate ion and hydrocarbon, the reservoir temperature has great influence on the TSR reaction. H2S has relatively active chemical quality, so it is still controlled by the content of heavy metal ion. Good conditions of TSR reaction and H2S preservation are the prerequisite of H2S distribu- tion prediction. This paper builds a predictive model based on the characteristic of natural gas reservoir with high H2S-bearing. In the porosity reservoir with anhydrite, the formation water is rich in sulfate and poor in heavy metal ion. Oil and gas fill and accumulate in the gas reservoir with good preservation conditions, and they suffered high temperature later, which indicates the profitable area of natural gas with high H2S-bearing.     

实现细粒煤深度脱硫产业化的研究

根据我国高硫煤的赋存特点,提出采用微细介质重介旋流器及细泥选择性絮凝组合工艺实现细粒煤的深度脱硫,无机硫脱除率可大幅度提高,分选下限明显降低,是实现煤炭深度脱硫降灰产业化的有效技术途径.     

奥氏体-贝氏体复相组织形态的研究

在60Si2MnA钢等温淬火工艺和性能研究的基础上,用MEF-3型金相显微镜和JEM-200CX型透射电子显微镜对等温转变产物的组织形态进行了观察研究。并用Rigku D/maxⅢB型X-射线衍射仪测定了样品的残余奥氏体体积分数。实验结果表明,奥氏体-贝氏体复相组织强韧性好的原因在于含有一定数量的残余奥氏体和变态贝氏体组织,且贝氏作为无碳化物贝氏体。     

铜基合金中马氏体穿晶行为的研究

在形状记忆合金中,存在马氏体穿晶生长现象,它是热弹马氏体相变在小角晶界的行为。     

硬盘分区链表中结点信息的完全恢复算法

通过对分区链表中结点信息的研究 ,及前后结点中相关数据项比较之后 ,参照磁盘基数表中所记录的相应分区长度 ,给出了其中任一结点或整个分区链表丢失之后的修复算法