城市区域多物流无人机协同任务分配

针对城市区域多无人机协同物流任务分配问题, 综合考虑不同无人机性能、物流时效性、飞行可靠性等影响因素, 以经济成本、时间损失和安全风险最小为目标函数, 构建多无人机协同物流任务分配模型。因问题规模大、求解复杂度高, 设计改进的量子粒子群算法进行求解。首先，为增强粒子遍历性和多样性, 采用均匀化级联Logistic映射进行粒子初始化; 其次，为避免算法陷入局部最优解, 引入基于高斯分布的粒子变异方式; 最后，为提高算法运行效率, 运用自适应惯性权重方法对粒子赋值。仿真实验结果表明，所构建的模型能够实现任务分配多目标优化, 贴近城市区域无人机物流配送实际; 所提算法与传统量子粒子群算法和遗传算法相比, 任务分配代价分别下降了5.9%和6.3%;并进一步对参数权重设置进行分析, 当3个子目标函数权重系数分别为0.225、0.275和0.500, 种群规模为150时, 算法规划的结果最优。     

基于免疫粒子群优化的移动Sink路径规划算法

为了减少能量空洞和延长网络生命周期，在无线传感网中采用移动 Sink 的方式收集节点采集的数据是解决能 量效率问题的有效措施．采集路径的规划问题类似于旅行商问题，无法得到多项式时间的解．提出了将人工免疫算法和粒子群算法相结合，针对移动 sink 数据收集的路径规划问题寻求近似最优解，仿真结果表明: 与其他算法进行性能比较，所提出的优化算法能够有效减少能耗和缩短遍历路径．     

基于热中子探测评价裂缝的示踪剂特性研究

针对裂缝热中子示踪探测方法,从中子双组扩散理论入手结合蒙特卡洛数值模拟方法,分析压裂前后地层热中子分布影响因素,并模拟不同类型示踪剂及含量的热中子裂缝响应规律,筛选最佳示踪剂并给出其在支撑剂中含量的上、下限。结果表明:压裂前后热中子计数变化量主要受裂缝宽度和标记支撑剂中示踪剂含量的影响;钆对裂缝宽度变化反应最灵敏,钆元素是作为标记支撑剂的最佳示踪元素;随支撑剂中Gd 2O 3含量的增加,热中子计数率降低,热中子计数变化量D增加;示踪剂中氧化钆的上、下限值随裂缝宽度呈指数降低,且当裂缝宽度为1.0 cm时,Gd 2O 3的质量分数上限为0.68%,下限为0.03%。     

Evolution of ferronickel particles during the reduction of low-grade saprolitic laterite nickel ore by coal in the temperature range of 900–1250℃with the addition of CaO–CaF2–H3BO3

The method of producing ferronickel at low temperature(1250–1400℃)has been applied since the 1950s at Nippon Yakin Kogyo,Oheyama Works,Japan.Limestone was used as an additive to adjust the slag composition for lowering the slag melting point.The ferronickel product was recovered by means of a magnetic separator from semi-molten slag and metal after water quenching.To increase the efficiency of magnetic separation,a large particle size of ferronickel is desired.Therefore,in this study,the influences of CaO,CaF₂,and H₃BO₃ additives on the evolution of ferronickel particle at≤1250℃were investigated.The experiments were conducted at 900–1250℃with the addition of CaO,CaF₂,and H₃BO₃.The reduction processes were carried out in a horizontal tube furnace for 2 h under argon atmosphere.At 1250℃,with the CaO addition of 10 wt%of the ore weight,ferronickel particles with size of 20μm were obtained.The ferronickel particle size increased to 165μm by adding 10 wt%CaO and 10 wt%CaF₂.The addition of boric acid further increased the ferronickel particle size to 376μm,as shown by the experiments with the addition of 10 wt%CaO,10 wt%CaF₂,and 10 wt%H₃BO₃.     

车辆路径问题的粒子群算法研究

车辆路径优化问题是一类具有重要实用价值的组合NP问题．粒子群算法(panicle swarm optimization)是一种新出现的群智能(swarm intellingece)优化方法，将其应用于车辆路径优化问题，构造车辆路径问题的粒子表达方法，建立了此问题的粒子群算法，并与遗传算法作了对比试验．结果表明，粒子群算法可以快速、有效求得车辆路径问题的优化解，是求解车辆路径问题的一个较好方案。     

GFMIMU/GPS组合导航系统信息融合技术研究

GFMIMU/GPS(Gyroscope Free Micro Inertial Measurement Unit/Global Positioning System)组合导航系统具有抗高g值冲击、低成本、长寿命、较高精度等优点,在低成本精确制导武器和微小型无人机具有广阔的应用前景。针对工程应用中信息融合的精度和实时性两方面的要求,运用基于模型误差预测的扩展卡尔曼滤波MEP-EKF(Extended Kalman Filter base on Model Error Predictive)方法,将MEMS(Micro Electromechanical Systems)加速度计的误差作为模型误差来考虑,对GFMIMU/GPS组合导航系统进行建模仿真,将其与EKF和UKF(Unscented Kalman Filter)方法进行了仿真比较,在方位误差角的估计上取得了比他们精度高的仿真结果,而且MEP-EKF所需时间是UKF的10%.     

掺杂离子导体的粒子交叠广义晶格模型及其电导的粒子尺度效应

提出了一种掺杂离子导体（ＤＩＣ）的粒子交叠广义晶格模型，由此模型，推导随机－电阻－网络（ＲＲＮ）理论中３种导电键各自组分的几率，并采用有效介质近似（ＥＭＡ）计算了ＤＩＣ系统的电导及其粒子尺度效应。     

The detection of structural deformation errors in attitude determination

In the determination of the attitude parameters from a multi-antenna GPS array, one of the major assumptions is that the body frame is rigid at all times. If this assumption is not true then the derived attitude parameters will be in error. It is well known that in airborne platforms the wings often experience some displacement during flight, especially during periods of initializing maneouvres, such as taking off, landing,and banking. Often it is at these points in time that it is most critical to have the most precise attitude parameters.There are a number of techniques available for the detection of modeling errors.The CUSUM algorithm has successfully been implemented in the past to detect small persistent changes. In this paper the authors investigate different methods of generating the residuals, to be tested by the CUSUM algorithm, in an effort to determine which technique is best suited for the detection of structural deformation of an airborne platform. The methods investigated include monitoring the mean of the residuals generated from the difference between the known body frame coordinates, and those calculated from the derived attitude parameters. The generated residuals are then passed to a CUSUM algorithm to detect any small persistent changes. An alternative method involves transforming the generated residuals into the frequency domain through the use of the Fast Fourier Transform. The CUSUM algorithm is then used to detect any frequency changes. The final technique investigated involves transforming the generated residuals using the Haar wavelet. The wavelet coefficients are then monitored by the CUSUM algorithm in order to detect any significant change to the rigidity of the body frame.Detecting structural deformation, and quantifying the degree of deformation, during flight will ensure that these effects can be removed from the system, thus ensuring the most precise and reliable attitude parameter solutions. This paper, through a series ofsimulations, will assess the effectiveness of the above mentioned techniques for detecting structural deformation effects on a GPS multi-antenna array. These principles are then tested with experimental data.     

一种识别液体中粒状物的数字图象法软件的基本原理

本文介绍了一种识别液体中粒状物的数字图象法软件的基本原理,说明了软件中确定背景灰度门槛值的原则,发展了从背景中分离粒状物并对粒状物的大小和数目进行统计的算法。对整个软件进行了初步验证。