Microstructure,mechanical properties and wear resistance of an Al–Mg–Si alloy produced by equal channel angular pressing

Microstructure, mechanical properties and wear resistance in an ultrafine-grained Al–Mg–Si alloy fabricated utilizing a combination of equal channel angular pressing (ECAP) and dynamic aging were investigated in this paper. The results indicated that the grain size of the ECAP alloy was significantly refined, i.e., to ~239 nm after three ECAP passes. Meanwhile, the yield and tensile strength of the ECAPed material reached 340 MPa and 445 MPa, respectively, while maintaining a significant uniform elongation of 14%. Wear resistance results demonstrated that the wear rate, wear depth and width of the ECAPed material decreased in comparison with the solution-treated (SST) and peak-aged (T6) conditions under a load range of 5–25 N. The adhesive wear that occurs in the undeformed specimens at 10 N does not appear in the ECAPed specimen at the same load, indicating that the ECAPed specimen delay the appearance of more serious wear mechanisms under certain loads. The cooperative interaction of high density nano-scale β" precipitates and dislocations resulted in a combination of super-high strength and good work hardening ability which suppressed the extension of cracks between the friction layer and the plastic deformation zone. As a consequence, the combination of ECAP and dynamic aging brings a significant improvement for antifriction performance of the 6061 aluminum alloy.     

La$_{{1-x}}$Sr$_{x}$TiO$_{3}$ 薄膜的高通量 X 射线衍射

高通量材料合成方法和高通量材料表征手段区别于传统低效率的 "试错法"材料发展方法, 极大地加速了材料科学的变革和发展. 通过设计程序进行了高通量 X 射线衍射实验, 在保证数据分辨率条件下, 高效地表征了 La$_{1-x}$Sr$_{x}$TiO$_{3}$ 薄膜上多个数据位点的晶体结构, 验证了其成分的连续变化性质, 为后续开展更多类型的高通量 X 射线衍射实验提供了指导.     

铝合金加工用刀具的使用研究（三）

当前我国各机械加工生产厂家引进国外进口设备及生产线较多，实现引进设备及生产线上刀具的国产化以降低生产成本，成为当前国内整个机械加工领域亟待解决的问题。     

Science Letters： A synthetic Toll-like receptor 2 ligand decreases allergic immune responses in a mouse rhinitis model sensitized to mite allergen

It has been proposed that activation of Toll-like receptors （TLRs） plays crucial roles in the polarization of adaptive immune responses. A synthetic Toll-like receptor 2 （TLR2） ligand, Pam3CSK4, has been reported to modulate the balance of Th1/Th2 responses. We evaluated the modulation effect of Pam3CSK4 on allergic immune response in a mouse rhinitis model sensitized to house dust mite allergen （HDM）. Mice were sensitized and challenged with Dermatophagoidesfarinae allergen （Der f）, and then the allergic mice were treated by Pam3CSK4. Nasal allergic symptoms and eosinophils were scored. Der f-specific cytokine responses were examined in the splenocytes and bronchoalveolar lavage fluid （BALF）. Serum level of total IgE was also detected. After establishing a mouse allergic rhinitis model with HDM, we have showed that Pam3CSK4 treatment not only ameliorated the nasal allergic symptoms remarkably but also decreased the eosinophils and total inflammation cells in BALF significantly. Analysis of cytokine profile found that IFN-7 released from either BALF or stimulated splenocytes increased markedly in Pam3CSK4-treated mice, while IL-13 decreased significantly. Moreover, serum level of total IgE was significantly lower in Pam3CSK4-treated mice than in the untreated. Thus, in an allergic rhinitis mouse model developed with HDM, Pam3CSK4 was shown to exhibit an antiallergic effect, indicating its potential application in allergic diseases.     

（BN）n及SiB（n-1）Nn（n=2-11）稳定结构的研究

利用遗传算法及Gastreich提出的经验势函数,研究了（BN）n（n=2-11）和SiBn-1Nn（n=2-11）团簇的可能稳定结构,对能量较低的异构体在HF/STO-3G水平进行优化,得到了（BN）n（n=2-11）和SiBn-1Nn（n=2-11）团簇稳定结构单环及线状结构,并进一步分析了单环的结构特征及相对稳定性。     

电磁相分离法制备自生表层复合材料

采用电磁相分离法制备出以初生富铁相（AlSiFeMn复杂金属间化合物）为增强相，表层硬度为HB62．25，基体硬度为HB59．00的Al-11.70%Si-1.20?-1.50%Mn合金自生表层复合材料，增强相的显微硬度为HV 842。87，大小为20－80μm，该表层复合材料同基体材料相比，耐磨性提高了57．41％，所用方法工艺过程简单，成本低，为解决材料在服役环境中不同部位，不同性能的问题提供了新途径。     

Fe_3Al的抗高温氧化和耐热腐蚀性能

在７００℃与８５０℃的高温下，Ｆｅ＿３Ａｌ金属间化合物表面形成了Ａｌ＿２Ｏ＿３保护膜，使其抗氧化性能远优于不妨钢，２％Ｃｒ（原子百分比）加入Ｆｅ＿３Ａｌ会导致氧化过程初期氧化速率的增高，在熔融的硫酸盐和高压锅炉的烟气中，Ｆｅ＿３Ａｌ的耐热腐蚀性能优于高温合金ＧＨ１３２．     

离子束增强沉积制备Al、Al－Y薄膜改善304不锈钢抗氧化性能的研究

用离子束增强沉积的方法，在３０４不锈钢表面合成了Ａｌ及Ａｌ－Ｙ薄膜．通过在９５０℃、１０５０℃的恒温氧化和９５０℃的循环氧化实验发现，由于Ａｌ＿２Ｏ＿３保护膜的生成显著提高了３０４不锈钢的抗氧化性，而Ｙ的加入又明显地提高了Ａｌ＿２Ｏ＿３氧化膜的抗循环氧化能力．本文通过ＳＥＭ、ＡＥＳ、ＥＰＭＡ及Ｘ射线衍射相分析等手段，分析了氧化产物层的形貌和组成．并根据实验结果探讨了Ａｌ、Ｙ有益作用的机制．     

超塑性板材气压成形模具的设计与计算

介绍了金属的“超塑性”概念及其特点,阐述了超塑性材料Zn-22%Al板材气压成形的原理,着重解释了其板材气压成形模具的设计与计算,对生产实际与理论探讨具有现实意义。     

日本人的“ラち”、“そと”意识与日语的时态转换

从日本人的“ラち”、“そと”意识角度出发，通过对川端康成、志贺直哉的几部小说进行分析统计，探讨日语在描写过去的事件中，插入“内时态‘る’形”的条件和原因。分析发现当作者为了使作品更生动，或是作者与作品中人物产生“同感”时，或是表达作者的主观思想、评论时，往往发生时态的转换。