Self-rolled TiO_2 microscroll/graphene composite for electrochemical dopamine sensing

Dopamine is an important neurotransmitter,and nonenzyme electrochemical sensor of dopamine detection based on highly active material is urgently demanded.In this work,an electrochemical sensor with high sensitivity and selectivity based on self-rolled TiO_2microscroll/graphene composite was developed and validated for dopamine sensing.The device exhibited a superior performance for dopamine detection with a detection limit of 4.25×10~(-9)mol L~(-1),and in the dopamine concentration range of 0.06–90μmol L~(-1),the oxidation currents increased linearly with the concentration.The remarkable performance enhancement was mainly ascribed to the increased surface area due to the porous surface of the TiO_2nanomembrane and highly conductive graphene therein.In addition,we have demonstrated that the sensor could be effectively used on detecting dopamine concentrations in urine samples.Our work demonstrates that the current microscroll-based device is promising in the field of real-time health monitoring for future human community.     

浅析“四项负责制”在高校图书馆的实施——以湖北工程学院图书馆为例

分别从"四项负责制"的基本概念入手,阐述了在高校图书馆实施"四项负责制"的基本内容及基本要求,以湖北工程学院图书馆为例,介绍了该馆倡导和推行"四项负责制"的情况,以提高图书馆整体服务质量。     

工程实践中的体系与系统

 介绍了国际上通行的体系概念，通过实例阐述了常见的体系类型，从多个维度描述了系统与体系的区别，根据实践总结，提出体系与系统的核心界定准则，并结合工程实践进行了详细描述。     

基于回转输运试验的煤散料离散元接触参数修正

为获取精确的刮板输送机离散元模拟结果，基于回转输运试验，通过响应面法对煤料的接触参数进行修正.采用Plackett-Burman试验考察接触参数对受力及堆积角的影响，发现煤-钢静摩擦系数、煤-煤摩擦系数具有显著正效应.根据爬坡试验结果，以受力及堆积角为响应值规划Box-Behnken试验，建立受力、堆积角与显著项间的二次回归多项式，以实测数据为目标值求得最佳参数:煤-钢静摩擦系数为0.401，煤-煤静摩擦系数为0.333，煤-煤滚动摩擦系数为0.041.通过不同输运条件下的回转试验验证了参数的准确性，为刮板输送机的离散元研究提供参考.     

基于三维点云的岩体结构面自动分类与参数计算

结构面间距是岩体稳定性和力学特性分析中的一个重要参数，在岩石力学、采矿工程、边坡监测等领域的数值计算中广泛应用.本文以岩体边坡露头为研究对象，基于非接触测量获得的三维点云数据，提出一种基于密度聚类的结构面细化分类方法；在结构面粗略分组提取的基础上，通过投影变换、散乱点拟合等算法，求得结构面间距和岩体体积节理数.设计开发了结构面细化分类及间距等参数计算与分析原型系统，实际案例分析表明，本文方法可有效实现结构面的自动细化分类，并能够计算出间距等相关参数，可为岩体质量分级和岩体稳定性分析等提供方法支撑.     

基于模型的汽油机电子节气门控制器设计

摘要： 建立了电子节气门系统模型，并通过系统辨识方法得出模型参数.根据被控电子节气门的摩擦力和非线性回位弹簧模型，设计了前馈非线性补偿控制器.将经过前馈非线性补偿后的电子节气门系统简化成线性系统，并对该线性系统进行H无穷控制器的设计.对设计的H无穷控制器进行离散化，并加入比例控制环节来弥补控制器离散化导致的性能下降.经过试验验证，在前馈非线性补偿器、H无穷控制器和比例控制的作用下，被控电子节气门的性能达到了设计需求.     

页岩气低伤害超临界CO2凝胶压裂液研究

针对常规水压裂液会对页岩造成伤害，容易产生水锁，不易返排，还造成水资源消耗和污染环境等问题，制备了低伤害二氧化碳凝胶压裂液。将自备的F2EU和F4EU增稠剂加入到超临界CO₂基液中，探究两种增稠剂的加入量对CO₂凝胶压裂液黏度的影响，综合考虑成本与效果，优选了2%的F4EU增稠剂，可将CO₂的黏度增至15.4 mPa·s。研究了温度、压力以及剪切速率对凝胶压裂液黏度的影响。实验结果表明，随着温度升高黏度总体降低，但中间出现一个短暂升高阶段；随着压力上升压裂液黏度增加；随着剪切速率的增加压裂液黏度下降，属于一种典型的剪切变稀的假塑性流体。F4EU超临界CO₂凝胶压裂液的平均伤害率为1.39%，远远小于常规压裂液对岩芯的伤害率。实验表明，F4EU超临界CO₂凝胶压裂液在页岩气压裂开采中具有良好的应用前景。     

Recent advances and challenges in materials for 3D bioprinting

3D bioprinting has been developed as a promising technology in a wide variety of biomedical applications. However, the successful implementation of bioprinting is still heavily restricted by the relatively narrow range of printable and biocompatible materials. Recently, many comprehensive reviews of the main bioprinting methods, commonly used bioprinting materials and the trending bioprinting applications have been carried out. In this review, we focused on the trends in the development of materials for 3D bioprinting. The significance and recent advances of ECM-based materials, multi-material and stimuli-responsive materials for bioprinting were summarized successively. Moreover, the challenges in current studies and future perspectives of materials for 3D bioprinting were discussed.     

具有sn-网的空间

证明了具有σ—点有限sn—网及σ—局部可数sn—网的空间可刻划为度量空间在某些确定映射下的象.     

Supercritical Fluid Carbon Dioxide in the Extraction of Lanolin and Its Alcohol

The use of supercritical fluid carbon dioxide (SF-CO_2) in extraction of lanolin and its alcohol issuperior to the conventional solvent extractionmethod. Its distinctive advantages include highextractive ratio, nontoxic and nonflammablesolvents, and minimal by-product pollution. The