Microstructure,mechanical properties and wear resistance of an Al–Mg–Si alloy produced by equal channel angular pressing

Microstructure, mechanical properties and wear resistance in an ultrafine-grained Al–Mg–Si alloy fabricated utilizing a combination of equal channel angular pressing (ECAP) and dynamic aging were investigated in this paper. The results indicated that the grain size of the ECAP alloy was significantly refined, i.e., to ~239 nm after three ECAP passes. Meanwhile, the yield and tensile strength of the ECAPed material reached 340 MPa and 445 MPa, respectively, while maintaining a significant uniform elongation of 14%. Wear resistance results demonstrated that the wear rate, wear depth and width of the ECAPed material decreased in comparison with the solution-treated (SST) and peak-aged (T6) conditions under a load range of 5–25 N. The adhesive wear that occurs in the undeformed specimens at 10 N does not appear in the ECAPed specimen at the same load, indicating that the ECAPed specimen delay the appearance of more serious wear mechanisms under certain loads. The cooperative interaction of high density nano-scale β" precipitates and dislocations resulted in a combination of super-high strength and good work hardening ability which suppressed the extension of cracks between the friction layer and the plastic deformation zone. As a consequence, the combination of ECAP and dynamic aging brings a significant improvement for antifriction performance of the 6061 aluminum alloy.     

Effect of heat treatment on microstructures and properties of a novel Al-Zn-Mg-Cu alloy for oil drilling

In view of the special requirements for strength, heat resistance and corrosion resistance of Al-Zn-Mg-Cu alloy for oil drilling, the Al-6.2 Zn-2.5 Mg-1.6 Cu alloy was prepared by increasing Cu content on basis of Russian Series 1953 alloy. The effect of heat treatment on the microstructures and properties of the alloy was characterized by optical microscope(OM), scanning electron microscope(SEM) and transmission electron microscope(TEM), and investigated by tensile test at room temperature, thermal exposure test and corrosion test. The results show that the strength after T6 aging treatment exhibit a decrease trend as an increase of the solution temperature from465 °C to 480 °C. After the solution treated by the rate of 470 °C/1 h, second phases dissolve into the matrix very well and the strength property reaches optimum. The alloy has better comprehensive properties treated by a solution treatment of 470 °C/1 h and then followed by an aging treatment of 120 °C/24 h + 170 °C/1 h + 120 °C/24 h. Under the aging state, the precipitated phases inside the grains are suitable in size, while on the grain boundary distribute discontinuously and the precipitate-free zone is obvious. Besides, the alloy still maintain high tensile properties. The yield strength, tensile strength and elongation are 650 MPa, 686 MPa,12.0%, respectively. The yield strength retention after heat exposure is 92%. The alloy has good corrosion resistance and the exfoliation corrosion degree. The average corrosion rate in the H_2S and CO_2 environment is 0.0024 mm/a, which is far less than the required 0.12 mm/a. It is insensitive to H_2S and CO_2 environments.     

几乎无偏刘估计的不可容许性

考虑了线性回归模型中,在Fisherian和Mahalanobis损失函数下,几乎无偏刘估计对于最小二乘估计的不可容许性;结论表明:几乎无偏刘估计在Mahalanobis损失函数下是不可容的;最后进行了数值模拟来表明结果.     

封闭式运动减肥对肥胖青少年体质健康的影响

对44名14～19岁肥胖青少年进行6周的封闭式饮食控制及运动,测定实验对象的身体形态、身体机能、身体素质和血液健康等指标.通过数理统计方法对实验所测得的数据进行分析.结果表明:肥胖青少年的脂肪量、体质量、体脂率都有明显的下降(P0.05);肺活量逐渐上升,身体素质指标(耐力、柔韧、50 m跑)与血液健康指标(血脂TC、甘油三酯TG、空腔胰岛素FINS)都呈非常明显改善(P0.01).封闭式运动减肥对青少年肥胖者体质健康具有良好的效能表现.     

智能高速罐身电阻焊机数字化控制系统

提出了以国产MCT80 0 0F8运动控制器为核心的智能高速罐身电阻焊机数字化控制系统 ,并介绍了系统的组成、工作原理、硬件接口、电机控制方法以及伺服电机的运动关系数学模型 .新的系统有利于提高罐身电阻焊机的制罐生产速度 ,并具有功能全面、可靠性高、控制精确、开放性好以及成本较低等优点     

NIPA类共聚温敏水凝胶中水的状态和耐热性

用N-异丙基丙烯酰胺（NIPA）与丙烯酸钠（SA）及甲基丙烯酸钠（SMA）共聚合成了两个系列的水凝胶，研究了共聚组成与水凝胶基本性质的关系，并用示差扫描量热法（DSC）和热失重法（TG）研究了此类水凝胶中水的状态和耐热性。     

波纹纤维混凝土的动力耗散研究

根据曲线纤维的几何特点和受力性能 ,推导了波纹纤维混凝土的本构关系 ,在本构理论的基础上进行动力耗散研究     

关于差分式放大器输入电阻的研究

差分式放大器在实际应用方面非常广泛,其理论分析方法的深入研究,对生产实践和教学都有重要的意义。采用电路理论分析、差放理论分析、“虚短”理论分析及实验的方法对差分式放大电路进行了研究。     

IUD频繁脱落者放置吉妮IUD186例临床观察

目的：寻找宫内节育器频繁脱落者，采用吉妮宫内节育器宫内独特的固定方式，以解决宫内节育器反复落脱问题。方法：受术妇女在月经干净3～7d内放置，用专用放置器将丝线小结植入子宫底肌层10mm，使吉妮悬吊于宫腔内，剪除多余尾丝，放置后于1、3、6、12月跟踪随访。结果：放置186例，1例放置后首次月经期脱落，1例为放置6个月带器妊娠，1例因疼痛、出血，放置后3个月取出。其余跟踪随访1年无异常，1年续用率为98．39％。结论：吉妮宫内节育器是安全、高效、副作用少的新型宫内节育器，特别适用于宫内节育器频繁脱落者使用，值得临床推广。     

高贵心灵的无声抗争——《女勇士》与《红字》两则故事相似性之比较

华裔美国女作家汤婷婷的作品《女勇士》中无名女人的故事与美国19世纪浪漫主义小说家纳塞尼尔·霍桑的代表作《红字》中海斯特·白兰的故事都是有关通奸的故事，虽写于不同的时代，但两个故事有着惊人的相似性。本文从两个故事的发生原因，结果以及两位女主人公对通奸行为的态度三个方面简要分析两种通奸行为，旨在阐明通奸行为是两个女人对自由和爱情的追求以及她们对当时父权社会的反抗。