Effect of heat treatment on microstructures and properties of a novel Al-Zn-Mg-Cu alloy for oil drilling

In view of the special requirements for strength, heat resistance and corrosion resistance of Al-Zn-Mg-Cu alloy for oil drilling, the Al-6.2 Zn-2.5 Mg-1.6 Cu alloy was prepared by increasing Cu content on basis of Russian Series 1953 alloy. The effect of heat treatment on the microstructures and properties of the alloy was characterized by optical microscope(OM), scanning electron microscope(SEM) and transmission electron microscope(TEM), and investigated by tensile test at room temperature, thermal exposure test and corrosion test. The results show that the strength after T6 aging treatment exhibit a decrease trend as an increase of the solution temperature from465 °C to 480 °C. After the solution treated by the rate of 470 °C/1 h, second phases dissolve into the matrix very well and the strength property reaches optimum. The alloy has better comprehensive properties treated by a solution treatment of 470 °C/1 h and then followed by an aging treatment of 120 °C/24 h + 170 °C/1 h + 120 °C/24 h. Under the aging state, the precipitated phases inside the grains are suitable in size, while on the grain boundary distribute discontinuously and the precipitate-free zone is obvious. Besides, the alloy still maintain high tensile properties. The yield strength, tensile strength and elongation are 650 MPa, 686 MPa,12.0%, respectively. The yield strength retention after heat exposure is 92%. The alloy has good corrosion resistance and the exfoliation corrosion degree. The average corrosion rate in the H_2S and CO_2 environment is 0.0024 mm/a, which is far less than the required 0.12 mm/a. It is insensitive to H_2S and CO_2 environments.     

对摩擦力作功与摩擦生热的量度的认识

本文通过对摩擦力作功与不擦生热的讨论，给出摩擦生热的量度方法．     

关于对高速公路养护管理的探讨

通过对高速公路养护管理特点、原则、主要内容的阐述,分析并指出现阶段我国高速公路养护管理存在的问题,并对高速公路养护管理的发展提出了的几点建议。     

双门电冰箱的热传导问题

本文将根据热传导方程,对电冰箱达定态过程进行理论推导,以及定态后电冰箱单位时间吸收的热量,并由此计算出由于冰箱箱体的热量泄漏而消耗的能量。     

金属工件内部残余应力的振动消除研究

本文针对传统的消除金属工作内部残余应力的热时效处理法的不足，从激振角度，运用材料力学、动力学中的振动理论等知识，并通过大量试验验证，研究了振动消除应力的方法－－振动时效法的原理及其有关问题。说明这种新的方法具有节能、高效等一系列优点。     

n维空间简谐势阱中理想费米气体的化学势与热容量

采用Ｔｈｏｍａｓ－Ｆｅｒｍｉ的半经典近似方法,得到处于ｎ维空间简谐势阱中的理想费米气体的化学势和热容量等物理量的通用表示式,并讨论了空间维数和外势对这些物理量的影响     

半刚性基层施工弯沉检测标准研究

根据重庆地区大量实测资料 ,对影响半刚性基层弯沉变异性的各主要因素进行了分析 ,并根据实际需要 ,对施工期实测弯沉的龄期与养生温度的影响进行了修正 ,得出可用于施工检测的弯沉控制标准     

颜料对紫外光固化涂料固化速率的影响

研究红、黄、蓝3种颜料对紫外光固化涂料固化速率的影响，并探讨其机理，实验结果表明，颜料对固化速率的影响极大，加入少量的颜料即可使固化速率大大降低，不同颜料对固化速率的影响相差很大。     

引黄入并后汾河水库蓄水调度探讨

汾河水库是引黄水入并的调蓄水库。文章对汾河水库的运用状况、来水频率、库容变化进行了分折，并对引黄水入并后如何充分发挥汾河水库的调蓄功能，在保征水库防洪安全的访提下，做好拦洪、蓄洪和对黄河水的合理调蓄，继续发挥汾河水库的功能和作用的问题，进行了论述。