Microstructure and heat treatment for Ni3Al-based single crystal alloy with different crystal orientations

Ni₃Al-based single crystal alloy IC6SX with different crystal orientations were prepared by seed crystal method. The microstructure and heat treatment of the alloy were investigated. The results showed that the microstructure of the alloy was in dendrite structure, and the crystal orientation had significant effect on the dendrite morphology of this alloy. The precipitated phases of (MoNi)₆C and NiMo appeared in the microstructure of the three alloys with different crystal orientations during solidification process. Compared with other two alloys, the volume fractions of precipitated phases of both (MoNi)₆C and NiMo was the most in the alloy with [111] orientation and the least in the alloy with [001] orientation. The solidus and liquidus temperatures of the alloy IC6SX tested by differential scanning calorimetry (DSC) were 1356 °C and 1387 °C, respectively. Meanwhile, the effect of different solution temperatures on the microstructure of the alloy with different orientations was studied. The results showed that the precipitated phases of (MoNi)₆C and NiMo were eliminated with the solid solution treatment under the condition of 1300 °C/10 h. However, the incipient melting of the alloys occurred due to the dissolution of low melting point phases. As the temperature dropped to 1280 °C, the area of incipient melting in the alloy with different orientations decreased gradually. However, there was no incipient melting appearing in the three alloys with different orientations when the solution treatment temperature dropped to 1260 °C.     

枯草芽孢杆菌SX3411产抑菌物质的发酵条件优化

枯草芽孢杆菌SX3411菌株自身带有subtilomycin基因簇,其主要的抑菌成分为subtilomycin.该文采用单因素分析法分析了枯草芽孢杆菌SX3411在不同发酵条件和营养成分时对抑菌物质产生的影响.根据单因素分析,对枯草芽孢杆菌SX3411产抑菌物质设计了响应面法分析,通过响应面法获得了最优的发酵条件和最佳...     

基于SX52的嵌入式web服务器远程监控技术的实现

介绍了一种基于嵌入式web服务器的远程监控系统,该系统采用嵌入式Internet技术、计算机网络技术,实现在局域网乃至Internet网上对远程设备的实时监控。     

排列组合法推算原子光谱项的探讨

应用排列组合法可以推算原子光谱项，该文将此方法程序化，并计算了等价电子组态的原子光谱项，得到了满意的结果。     

Creep behavior and dislocation mechanism of Ni3Al based single crystal alloy IC6SX at 760°C

The creep behavior and dislocation mechanism of Ni₃Al-based single crystal alloys IC6SX with crystal orientation [001] which was prepared by seed crystal method under the testing conditions of 760 ​°C/500 ​MPa,760 ​°C/540 ​MPa and 760 ​°C/580 ​MPa were investigated. The experimental results showed that the creep properties, dislocation morphology and mechanism of this alloy were different under different stress conditions. With the stress increasing from 500 ​MPa to 580 ​MPa, the creep life decreased from more than 1000h to 32.64h. The cubic degree of γ′ phase in single crystal alloy decreased obviously and the size of γ′ phase increased. The mechanism of dislocation movement also changed with the increasing stress. It was found that after the specimen was tested under the condition of 760 ​°C/500 ​MPa the dislocation network prevented the movement of dislocations and it was difficult for dislocations to enter the γ′ phase from the γ/γ′ interface. When the stress was 540 ​MPa, the dislocations cut into the γ′ phase by stacking fault. Furthermore, with the stress increasing to 580 ​MPa, the dislocation entered the γ′ phase in the form of extended dislocation and Lomer-Cottrell dislocation.     

基于Web嵌入式以太网控制系统的研究

提出了一种基于Web嵌入式以太网控制系统的方案.以SX52BD为核心,通过RTL8019AS接入以太网.SX52BD可直接或间接控制设备.采用B/S与C/S相结合的模式,实时数据的动态浏览采用Java applet技术.该系统可以广泛应用于网络化控制领域.     

一种基于DGPS+IDEN的数字集群车载台的设计

数字集群移动通信系统相比模拟集群其频谱利用率和信号抗信道衰落的能力都有很大的提高.利用现有设备i30SX数字集群手机和DGPS-220等进行集成,设计的一种可用于公交车、出租车等车辆系统的车载台,既可以定位,又可以进行调度,且成本也较低.结果表明,此设计基本上达到了预期的目标.     

基于嵌入式Web服务器的信息家电安防监控系统

提出了以基于SX52控制器的嵌入式Web服务器为核心的信息家电安防监控系统设计方案,实现了嵌入式系统与Internet相连、家庭内部的安全监视、信息传输、自动实施处理以及嵌入式设备本身性能的监控等功能。     

一种改进的距离差定位算法

针对近似平面布局的距离差测量定位系统,提出了一种改进SX(sphericalintersection)定位算法。该算法首先求解目标的高度,避免了方程系数矩阵病态,因而在算法量相当的情况下,可获得较好的目标定位精度。通过加权最小二乘估计来有效地利用系统的冗余信息。分析了它的定位性能并给出了加权估计的权矩阵近似公式,同现有的定位方法以及克拉美 罗下限(CRLB)进行了仿真比较。     

SX1近交系小鼠主要脏器及血液生化指标的测定

目的测定SX1近交系小鼠的主要生化及血液指标,为建立该品系小鼠的生物学特性资料提供实验数据。方法从F29、F30代仔鼠中选择1、2、3、4月龄的小鼠,分别测定这些小鼠的体重、体长、尾长;心、肝、脾、肺等12种脏器的重量;总蛋白、白蛋白、血糖、肌苷等16项血液生化指标及白细胞、红细胞、血红蛋白等15项血液常规指标。结果SX1小鼠在1、23、、4月龄时的体重、体长、尾长,心、肝、脾等脏器随小鼠生长而增加,但胸腺随小鼠生长而缩小;各脏器重量均雄性大于雌性,肾上腺为雌性大于雄性;其中14项血液生化指标随小鼠的生长基本无明显变化,而总胆红素和碱性磷酸酶指标随小鼠生长而降低,多数指标无性别差异,但碱性磷酸酶指标雌性大于雄性;其中13项血液常规指标随小鼠的生长基本无明显变化,只有白细胞与平均血小板压积随小鼠生长而降低,且白细胞指标雄性大于雌性。结论各项指标基本符合近交系小鼠的特征,补充了SX1近交系小鼠的资料。