打造新时代创新策源地——以湖北科技特派员制度为例

湖北省多年来深入推行科技特派员制度,在全国科技特派员制度推行和科技服务的伟大实践中拼搏奋进,从启动科技特派员地市试点工作,到全面开展科技特派员基层创业行动,从出台深入推行科技特派员制度实施意见,到开展湖北省科技特派员"百县千镇万人"工程实施,围绕产业链布局人才链的科技生态日臻完善.科技特派员个人、团队和法人单位点面结合,工作室与工作站交相辉映,他们立足湖北服务华中片区和秦巴山区,辐射服务全国各地,湖北科技特派员的服务足迹遍布荆楚星辰大地,谱写着新时代湖北科技特派员服务体系的新篇章.     

时标轴上二阶Dirichlet边值问题的弱解（英文）

采用变分方法和临界点理论研究一个时标轴上二阶Dirichlet边值问题弱解的存在性.     

仿生非光滑花纹沟对轮胎抗滑水性能的影响

以205/55R16乘用车轮胎为研究对象,采用计算流体动力学建立了考虑胎面花纹变形的轮胎滑水分析模型;以气-液二相流数值模型分析了轮胎的滑水性能,并将临界滑水速度仿真值与NASA滑水速度预测值及轮胎发生滑水时力平衡下的速度进行对比.在此基础上,引入仿生减阻理念,研究了夹角为60°、高度为0.6mm的仿生对称V形结构对花纹沟排水量和水流阻力的影响,并将其结构特征信息等效移植到接地区轮胎花纹沟底,进行了仿生花纹轮胎的滑水性能分析.结果表明:所建滑水分析模型可用来分析轮胎滑水时的流体运动特性;相对原花纹轮胎,仿生非光滑花纹沟轮胎通过提高接地区花纹沟内水流速度,降低了胎面动水压力,提高了临界滑水速度.     

关于二面体群的共轭类长素图

讨论二面体群的结构问题,利用GAP软件给出二面体群D2n的共轭类长素图,并完整给出当n以及n/2分别是奇数和偶数时的共轭类长素图情况.     

基于回波预处理和相参积累的C&I干扰抑制算法

C&I(chopping and interleaving)干扰是一种针对线性调频(linear frequency modulation, LFM)雷达的典型干扰样式, 干扰子信号调频斜率与雷达发射信号相同, 利用信号处理工具分离真实回波与干扰信号难度较大。针对该问题, 以LFM相参雷达抗自卫式C&I干扰为背景, 提出基于回波预处理和相参积累的干扰抑制算法。根据估计的回波时延, 设置距离窗截取受干扰回波段, 在此基础上, 通过对回波预处理, 改变不同重复周期内假目标的快时间位置分布, 通过相参积累实现干扰抑制。仿真试验表明, 所提算法能够有效抑制强干扰背景下的C&I干扰, 干扰抑制后真实目标检测概率大幅提高, 虚假目标数量明显减少。     

Optimal investment problem for an insurer and a reinsurer

This paper studies the optimal investment problem for an insurer and a reinsurer. The basic claim process is assumed to follow a Brownian motion with drift and the insurer can purchase proportional reinsurance from the reinsurer. The insurer and the reinsurer are allowed to invest in a risk-free asset and a risky asset. Moreover, the authors consider the correlation between the claim process and the price process of the risky asset. The authors ?rst study the optimization problem of maximizing the expected exponential utility of terminal wealth for the insurer. Then with the optimal reinsurance strategy chosen by the insurer, the authors consider two optimization problems for the reinsurer: The problem of maximizing the expected exponential utility of terminal wealth and the problem of minimizing the ruin probability. By solving the corresponding Hamilton-Jacobi-Bellman equations, the authors derive the optimal reinsurance and investment strategies, explicitly. Finally, the authors illustrate the equality of the reinsurer's optimal investment strategies under the two cases.     

A Layer-Stripping Method for 3D Near-Surface Velocity Model Building Using Seismic First-Arrival Times

In order to improve the efficiency of 3D near-surface velocity model building, we develop a layer-stripping method using seismic first-arrival times. The velocity model within a Common Mid-Point (CMP) ...     

An Economic Model-Based Matching Approach Between Buyers and Sellers Through a Broker in an Open E-Marketplace

A broker in an open e-marketplace enables buyers and sellers to do business with each other. Although a broker plays an important role in e-marketplaces, theory and guidelines for matching between buyers and sellers in multi-attribute exchanges are limited. Therefore, a challenge for a broker’s responsibility is how to maximize a buyer’s total satisfaction degree as its goals under the consideration of trade-off between a buyer’s buying quantity and price paid to a seller, and other attributes. To solve this challenge, this paper proposes an economic model-based matching approach between a buyer’s requirements and a seller’s offers. The major contributions of this paper are that (i) a broker can model a seller’s price policy as per a buyer’s buying quantity through communication between a broker and a seller; (ii) due to each buyer’s different quantity demand, a broker models a buyer’s satisfaction degree as per a buyer’s buying quantity based on communication between a broker and a buyer; and (iii) to carry out a broker’s matching processes, an objective function and a set of constraints are generated to help a broker to maximize a buyer’s total satisfaction degree. Experimental results demonstrate the good performance of the proposed approach.     

Study on the Centralization Strategy of the Blood Allocation Among Different Departments within a Hospital

By far, the researches on how to distribute blood products among different departments in hospital have not been further studied, though the problem of blood shortage and wastage that caused by improper blood allocation is severe, which may endanger patient’s lives and impose considerable costs on hospitals. In order to solve this problem, this paper mainly studies on how to distribute the blood items among different departments within a hospital and investigates the allocation approach with the novel management method by centralizing the inventory of several different departments. By integrating the blood inventory requirements of some departments, the hospital could reduce the rate of blood shortage and wastage effectively, release the pressure of the occupancy of resources and reduce the bullwhip effect of blood products. This paper illustrates the centralization principle in hospital and formulates the mixed integer programming model to work out the optimal allocation network scheme and the optimal inventory setting for every department. And the results of the numerical example demonstrate that this centralization method could considerably reduce blood shortage and wastage in hospital by about 72% and 90% respectively. Furthermore, it could decrease the total cost by about 108,540 RMB a month on blood supply chain management in the hospital and improve the effect of some certain surgeries by transfusing the fresh blood to patients.     

广西高技术产业科技创新能力评价研究

文章在分析广西高技术产业发展现状基础上,构建高技术产业科技创新能力评价指标体系,运用熵值法,基于2015—2019年面板数据对广西高技术产业的创新能力进行实证研究.研究表明:广西高技术产业创新能力在西部五省中处于较低水平;广西高技术创新产出实力略低于创新投入实力,创新技术吸收实力仍相对较弱;广西高技术四大行业创新能力存在差异,即电子及通信设备制造产业科技创新投入和产出效果最好,医药制造业和电子通信及装备制造业创新投入高,创新产出评分偏低,医疗仪器设备及仪器仪表制造产业和计算机及办公设备制造产业创新吸收能力很弱.基于以上结论,文章从加大创新资源投入、推动创新平台建设、加强人才队伍建设等方面提出了对策建议.