财政性科技经费监管体系探析

我国初步建立了财政性科技经费监管体系,但是在监督主体、监督制度等方面还存在缺陷,科技经费监督出现诸多问题。建立要加强宏观层面的统筹规划,建立由政府、承担单位和外部主体上下联动、横向联合的立体监督体系。     

利用SRTM数据修测高山区地貌的探讨

在高海拔区域测制地形图,如青藏高原地区,所获取的遥感影像局部存在着大范围的高山阴影或云雪覆盖,造成立体观测地貌困难的现象,探讨应用SRTM数据对这类特殊区域地貌进行修测补绘。介绍了数据处理的作业过程,并对实验区SRTM与SPOT5影像立体测图成果进行实验对比分析,成果符合要求。     

Optimal investment problem for an insurer and a reinsurer

This paper studies the optimal investment problem for an insurer and a reinsurer. The basic claim process is assumed to follow a Brownian motion with drift and the insurer can purchase proportional reinsurance from the reinsurer. The insurer and the reinsurer are allowed to invest in a risk-free asset and a risky asset. Moreover, the authors consider the correlation between the claim process and the price process of the risky asset. The authors ?rst study the optimization problem of maximizing the expected exponential utility of terminal wealth for the insurer. Then with the optimal reinsurance strategy chosen by the insurer, the authors consider two optimization problems for the reinsurer: The problem of maximizing the expected exponential utility of terminal wealth and the problem of minimizing the ruin probability. By solving the corresponding Hamilton-Jacobi-Bellman equations, the authors derive the optimal reinsurance and investment strategies, explicitly. Finally, the authors illustrate the equality of the reinsurer's optimal investment strategies under the two cases.     

Effects of Strain Rate,Temperature and Grain Size on the Mechanical Properties and Microstructure Evolutions of Polycrystalline Nickel Nanowires: A Molecular Dynamics Simulation

Through molecular dynamics(MD)simulation,the dependencies of temperature,grain size and strain rate on the mechanical properties were studied.The simulation results demonstrated that the strain rate from 0.05 to 2 ns~(–1 )affected the Young’s modulus of nickel nanowires slightly,whereas the yield stress increased.The Young’s modulus decreased approximately linearly;however,the yield stress firstly increased and subsequently dropped as the temperature increased.The Young’s modulus and yield stress increased as the mean grain size increased from 2.66 to6.72 nm.Moreover,certain efforts have been made in the microstructure evolution with mechanical properties association under uniaxial tension.Certain phenomena such as the formation of twin structures,which were found in nanowires with larger grain size at higher strain rate and lower temperature,as well as the movement of grain boundaries and dislocation,were detected and discussed in detail.The results demonstrated that the plastic deformation was mainly accommodated by the motion of grain boundaries for smaller grain size.However,for larger grain size,the formations of stacking faults and twins were the main mechanisms of plastic deformation in the polycrystalline nickel nanowire.     

广西高技术产业科技创新能力评价研究

文章在分析广西高技术产业发展现状基础上,构建高技术产业科技创新能力评价指标体系,运用熵值法,基于2015—2019年面板数据对广西高技术产业的创新能力进行实证研究.研究表明:广西高技术产业创新能力在西部五省中处于较低水平;广西高技术创新产出实力略低于创新投入实力,创新技术吸收实力仍相对较弱;广西高技术四大行业创新能力存在差异,即电子及通信设备制造产业科技创新投入和产出效果最好,医药制造业和电子通信及装备制造业创新投入高,创新产出评分偏低,医疗仪器设备及仪器仪表制造产业和计算机及办公设备制造产业创新吸收能力很弱.基于以上结论,文章从加大创新资源投入、推动创新平台建设、加强人才队伍建设等方面提出了对策建议.     

中国和美国信贷冲击跨境溢出效应的比较研究

本文构建了基于符号约束识别的GVAR模型,并用以考察中国和美国的信贷市场冲击对全球41个国家的不同溢出效应.研究结果表明,中国紧缩性信贷市场冲击对本国实体经济有显著的负效应,但仅限于短中期;而美国信贷冲击对本国乃至全球经济都具有相当大且持久的负影响.中国信贷冲击的跨国效应较小,且主要通过贸易渠道.中国信贷市场的本国冲击能解释中国产出近10%的波动,但无论是本国效应还是跨境传导,总需求冲击仍是驱动中国经济周期波动的最主要力量.     

三维打印器件后处理液研究

分析了不同的填充强化剂(后处理A液)、不同的后处理B液基料、后处理B液中水性环氧乳液的掺量及后处理液浸泡时间对石膏基打印器件耐水性、抗压强度、尺寸偏差、表面微观结构的影响.结果表明:经纳米硅超硬固化剂处理后的打印器件抗压强度大幅提高,纳米硅超硬固化剂最适宜作为后处理A液;水性聚氨酯乳液PU-202B最适宜作为后处理B液的基料;后处理B液中加入水性环氧乳液,处理后打印器件的抗压强度增加、吸水率降低,但水性环氧乳液含量增加到一定程度后会出现尺寸偏差;后处理A、B液最佳浸泡时间分别为130 s和35 s;先浸泡后处理A液、后浸泡后处理B液的打印器件具有抗压强度高、吸水率小、表面较光滑、不脱粉等优良性能.     

大学生羞怯与手机成瘾倾向:孤独感的中介作用

为探讨大学生羞怯与手机成瘾倾向的关系,考察孤独感在大学生羞怯与手机成瘾倾向之间的中介作用。采用羞怯量表、UCLA孤独量表得分第三版和大学生手机成瘾倾向量表对在贵州省8所高校抽取的1 147名大学生进行调查。结果显示:大学生羞怯量表得分、孤独感量表与手机成瘾倾向量表得分显著正相关(r=0.27,r=0.29,均P<0.001),羞怯量表得分和孤独感量表得分显著正相关(r=0.49,均P<0.001);羞怯和孤独感均可显著正向预测大学生手机成瘾倾向(均P<0.001),孤独感在大学生羞怯与手机成瘾倾向之间的部分中介作用成立。     

苏南经济社会发展与高等应用型技术教育对策研究

分析高等应用型技术教育中面临的诸多挑战,探讨行之有效的人才培养对策。