粉末冶金陶瓷模工艺中的快速脱蜡新技术

粉末冶金陶瓷模工艺是一种先进的过净形成形工艺．本文报道该工艺中一种新的脱蜡技术．采用快速加热、管径集中热量和定向导热传热综合方法，在陶瓷模和大部分蜡模材料处于较低温度下，使蜡模材料来不及发生显著的热膨胀而直接蒸发，得到脱蜡干净、外形完整的陶瓷模．     

机立窑鼓风机采用调速装置的探讨

介绍了机立窑鼓风机调速装置的工作原理和工作效果．提出了风机的选型原则。     

Structure of astacin and implications for activation of astacins and zinc-ligation of collagenases.

Astacin, a digestive zinc-endopeptidase from the crayfish Astacus astacus L., is the prototype for the 'astacin family', which includes mammalian metallo-endopeptidases and developmentally regulated proteins of man, fruitfly, frog and sea urchin. Here we report the X-ray crystal structure of astacin, which reveals a deep active-site cleft, with the zinc at its bottom ligated by three histidines, a water molecule and a more remote tyrosine. The third histidine (His 102) forms part of a consensus sequence, shared not only by the members of the astacin family, but also by otherwise sequentially unrelated proteinases, such as vertebrate collagenases. It may therefore represent the elusive 'third' zinc ligand in these enzymes. The amino terminus of astacin is buried forming an internal salt-bridge with Glu 103, adjacent to His 102. Astacin pro-forms extended at the N terminus, as observed for some 'latent' mammalian astacin homologues, did not exhibit this 'active' conformation, indicating an activation mechanism reminiscent of trypsin-like serine proteinases.     

大尺寸YBa2Cu3O7—δ超导体的研制

利用固相反应法成功地制备了直径为100mm,厚为5mm的大尺寸YBa_2Cu_3O_(7-δ)超导体。在通氧,930℃热处理45min后,超导体的上限转变温度为94K,零电阻温度为92K。x射线衍射进行物相定性,扫描电镜进行形貌和超导电性关系的对比观察。选区电子衍射给出YBa_2Cu_3O_(7-δ)超导体的晶格参数为a=0.348nm,b=0.377nm,c=0.716nm,属于正交晶系。     

基于B/S模式的年度考核管理系统的设计与实现

本文阐述了新疆师范大学年度考核管理系统的功能、设计与实现。     

A Study on the Design for Object-Oriented Adaptive Decision-Making Teams

1 .ＩＮＴＲＯＤＵＣＴＩＯＮＩｎＣ3Ｉｓｙｓｔｅｍｓ,ｒｅｃｅｉｖｉｎｇ ,ｔｒａｎｓｍｉｓｓｉｏｎ ,ｐｒｏｃｅｓｓｉｎｇａｎｄｄｉｓｐｌａｙｏｆｉｎｆｏｒｍａｔｉｏｎａｒｅｄｅｖｅｌｏｐｅｄｃｏｎｃｅｒｎｉｎｇｔｈｅｄｅ ｃｉｓｉｏｎｍａｋｉｎｇｏｆｃｏｍｍａｎｄｅｒｓ.Ｔｈｅｒｅｆｏｒｅ,ｔｈｅｍａｊｏｒｔａｓｋｏｆａＣ3Ｉｓｙｓｔｅｍｉｓｆｏｃｕｓｅｄｏｎｄｅｃｉｓｉｏｎｍａｋｉｎｇ.Ｗｉｔｈｔｈｅｒａｐｉｄｄｅｖｅｌｏｐｍｅｎｔｏｆｃｏｍｍｕｎｉｃａｔｉｏｎａｎｄｎｅｔｗｏｒｋ ,ｔｅａｍｄｅｃｉｓ…     

浅谈高等医学院校物理实验室管理与建设

确立实验技术人员的地位和作用,加强对其综合素质进行培养;努力改善实验教学环境和条件,建立完善的制度,是高等医学院校物理实验室建设管理的重要环节.本文结合我校实际谈一些体会.     

基于强跟踪滤波器估计的最优融合方法

在分布式雷达数据处理模式中 ,数据融合是获得较精确的目标轨迹的主要环节。为克服卡尔曼滤波器对初始值敏感、鲁棒性差和对机动目标跟踪性能差的缺陷 ,通过利用各传感器的观测数据 ,采用强跟踪滤波器对目标进行跟踪 ,以改善目标状态估计的精度。对判定源于同一目标的状态估计值 ,给出了一种估计状态线进行性组合的最优融合准则。得出了实际数据的实验结果。     

A Novel Polymethyl Methacrylate （PMMA）TiO2 Nanocomposite and Its Thermal and Photic Stability

A new kind of polymethyl methacrylate （PMMA）-TiO2 nanocomposite was synthesized through polymerization. The thermal and photic stability of this PMMA TiO2 nanocomposites were investigated. The as prepared samples were characterized by scanning electron microscopy （SEM）, UV-Vis spectroscopy, differential thermal analysis （DTA） and the photo-induced weight loss, The results show that the photostability of the PMMA-TiO2 nanocomposite is higher than that of the pure PMMA under UV-light irradiation, The weight loss of the pure PMMA reaches 30 % after 300 h UVirradiation, while the composite only 0.3% under the identical experimental condition. The glass transition temperature （TR） of pure PMMA is only 80℃, while the Tg of the composite reaches 258℃. Compared with pure PMMA, the thermal stability of the composite is greatly enhanced.     

综合(指导)类科技期刊发展现状及对策思考

文章分析了目前我国综合(指导)类科技期刊存在的主要问题,提出了综合(指导)类科技期刊要走出困境必须采取的对策措施。