改善20CrMnTiH淬透性的研究

莱钢特钢厂20CrMnTiH钢材成分波动较大,淬透性带HRC8～10,范围较大,制约了齿轮钢质量的进一步提高.通过研究,发现铸坯中心偏析尤其是碳偏析为主要问题.通过工艺优化采取各项措施,尤其增加电磁搅拌后,中心碳偏析得到明显改善;C控制在0.19%～0.20%的炉次达到了95.6%;淬透性带控制在HRC6内的达到了92.1%;在HRC4内的达到了86.2%;提高了产品质量,满足了用户需求.     

热连轧精轧机组温度模型的改进

从实际生产数据入手,研究了温度模型设定精度的现状及设定精度与各影响因素之间的关系,同时还消化了原来的温度模型程序并将其移植到微机上.经大量的离线统计回归分析,提出了一个行之有效的温度模型改进方案.该改进方案的思路同样适合其他热轧生产线.     

辨析企业人才的"留"与"流"

论述了辨证认识与处理好人才的“留”与“流”的关系，指出了只有做好人才管理工作，慎重地考虑人才的留用，才能使企业长期、持续、健康、稳定地发展。     

绿豆子叶衰老过程中线粒体膜对几种氨基酸的透性

采用线粒体膨胀技术就不同衰老程度的绿豆子叶线粒体膜对氨基酸的透性进行了测定，结果表明，随着绿豆子叶的衰老，离体线粒体膜在脯氨酸、丝氨酸和甘氨酸等渗溶液中的膨胀率从２ｄ龄至５ｄ龄子叶逐渐下降，５ｄ龄时，线粒体结构与功能已受到明显破坏，文中对膨胀率下降的原因进行了讨论。     

复线电气化区段施工感应电对人体的危害及防护对策

感应电会对人体造成伤害。从电磁感应和静电感应原理入手，分析了产生感应电的过程，并就如何防止感应电的危害提出了防护对策，有一定实用价值。     

A High Speed Detection Scheme for Point Targets in a Multitarget Environment

The purpose of this paper is to develop a high speed detection scheme for moving and / or stationary point targets in a multitarget environment as registered in an IR image sequence. An iterative approximate 3-D line searching algorithm based upon the geometric representation of lines (for non-maneuvering targets in space) in a 3-D space is derived. The convergency of the algorithm is proved. An analysis is performed of the theoretical detection performance of the algorithm. The statistical experiment results show high effectiveness and computational efficiency of the algorithm in the case of low SNR. The idea may be employed to satisfy the real-time processing requirement of an IR system.     

对提高施工中光缆接续质量的探讨

通过分析影响光缆接续质量的因素，从减少本征影响、克服技术因素、优化综合处置、减弱和避开环境影响4方面针对性地提出了实际施工中应采取的施工方法，以控制和减小不利影响，提高光缆工程的接续质量，为建设高质量传输线路提供有力保证。     

Radar Imaging Based on Iterative Algorithms

It has long been realized that the problem of radar imaging is a special case of image reconstruction in which the data are incomplete and noisy. In other fields, iterative reconstruction algorithms have been used successfully to improve the image quality. This paper studies the application of iterative algorithms in radar imaging. A discrete model is first derived, and the iterative algorithms are then adapted to radar imaging. Although such algorithms are usually time consuming, this paper shows that, if the algorithms are appropriately simplified, it is possible to realize them even in real time. The efficiency of iterative algorithms is shown through computer simulations.     

大型喷浆机器人的灵巧度分析

灵巧度是衡量机器人运动失真程度的重要参数。对机器人灵巧度评价指标进行了对比研究 ,结合大型喷浆机器人自由度较多的特点 ,用雅可比矩阵的条件数对喷浆机器人的灵巧度进行了分析。结果表明 ,大型喷浆机器人在不同形位下的条件数都很小 ,具有较好的运动灵巧度。     

基于遗传算法的导弹稳定控制回路参数设计方法

本文利用遗传算法（ＧＡ）来优化设计控制系统参数。文中在简要阐述遗传算法的机理及实现的基础上，将遗传算法应用于Ｘ型导弹的弹上稳定回路的参数设计，仿真结果表明了所提方法的可行及有效性。