基于熵评价模态分解的雷达信号双谱特征识别

针对在低信噪比下雷达信号调制识别准确率低、抗噪性差的问题, 提出一种基于熵评价模态分解和双谱特征提取的识别方法。利用双谱可以抑制高斯噪声的特点, 分析了在低信噪比下进行信号调制识别的可行性并引入了噪声项。由于噪声项的干扰, 双谱在0 dB以下时, 噪声抑制效果变差, 提出了基于信息熵评价的经验模态化分解对信号进行预处理, 提高信噪比。最后, 设计了卷积神经网络分类器, 实现对不同调制类型信号的识别。仿真实验结果表明, 本文方法相比传统方法具有良好的抗噪性, 能够在低信噪比下对不同类型信号进行有效识别。     

有限交换p-群中加性码的计数

解决了有限交换p-群中加性码的两类计数问题,第一类计数问题是指求任意给定的有限交换p-群中任意类型码的数目,第二类计数问题是指求包含同一类型码的有限交换p-群的数目以及它们分别所含有的该类型码的数目.     

Studies on the Crystallization Properties and Morphology Structure of the Cationic Dyeable Polypropylene Fibers

The crystallization properties and morphology structure of the cationic dyeable polypropylene fibers which were produced by the blending spinning method were studied by making use of X-ray and scanning electron microscopy (SEM). It comes to the conclusions that the larger the crystallite size in the fibers is , the better the dycable properties of the fibers are and there is a little compatibility between the dyeable agent and polypropylene resin. And the dye-uptake of the fibers may be up to 90% because the dyeable agent can uniformly be scattered in polypropylene.     

Preparation of enantiomerically pure 1,1′-bi-2-naphthols from 85% cinchonine and 1,1′-bi-2-naphtholboric anhydride

A possibility of preparation of enantiomerically pure 1,1′-bi-2-naphthols using an impure cinchonine has been examined. The solid and the mother liquor formed from the reaction of 1,1′-bi-2-naphtholboric anhydride and 85% cinchonine in toluene could give optically pure (S)-(−)- and (R)-(+)-1,1′-bi-2-naphthol after acidification and kinetic crystallization, the overall yields were 40% and 28%, respectively. Supported by the National Natural Science Foundation of China (2937206) and the Natural Science Foundation of Hubei Province (93J27) Xiong Ying, born in 1971, Graduate student     

金瓷修复体双材料界面断裂强度有限元分析

建立金瓷修复体双材料界面裂纹扩展的有限元计算模型．首先利用有限元计算得到平面应力条件下裂纹尖端位移场，求出裂尖附近复应力强度因子主导区域内对应点的相对位移，再辅以传统计算方法得到衡量双材料抵抗断裂能力的复应力强度因子K，并利用双材料界面断裂有关理论和基本公式，求得相关的断裂力学参量，对计算结果进行了实验验证．分析表明，金瓷层厚比对金瓷裂纹开裂具有很大的影响，为进一步分析和研究金瓷修复体断裂行为提供了研究方法。     

LF钢水成分与温度控制模型

以钢水、渣、包衬为研究体系,建立了钢水成分与温度控制模型。温度控制精度在±3℃以内,在补加系数法的基础上考虑了合金的收得率,推导出合金添加计算公式,使计算精度进一步提高。     

长江江豚慢性皮肤炎症的初报

报道了刚捕获的营养不良的幼年长江江豚,在人工饲养环境中遭条件致病菌侵袭后,左侧胸鳍脓肿,溃烂,结果导致江豚严重脱水、消瘦.采取隔离观察,灌液和静脉注射左氧氟沙星是治疗的主要手段.     

任意二值随机序列的一个强极限定理

给出了任意二值随机序列随机稀疏的一个强极限定理的信息条件，是Borel强大数定理的推广。     

Recent progress in polymer-based gene delivery vectors

The gene delivery system is one of the three components of a gene medicine, which is the bottle neck of current gene therapy. Nonviral vectors offer advantages over the viral system of safety, ease of manufacturing, etc. As important nonviral vectors, polymer gene delivery systems have gained increasing attention and have begun to show increasing promising. In this review, the fundamental and recent progress of polymer-based gene delivery vectors is reviewed.     

球孢白僵菌对七种蚜虫的感染反应——时间-剂量-死亡率模型分析

通过以球孢白僵菌(Beauveria bassiana)菌株SGBB8601系列浓度的分生孢子悬液(10~4～10~8孢子/mL)对俄罗斯麦双尾蚜(Diuraphis noxia)、麦无网长管蚜(Metopolophium dirhodum)、麦长管蚜(Sitobion avenae)、麦二叉蚜(Schizaphis graminum)、玉米蚜(Rhopalosiphum maidis)、禾谷缢管蚜(R padi)和忽布疣额蚜(Phorodon humuli)等七种蚜虫的体表接种试验,运用时间-剂量-死亡率模型分析了该菌株作用于上述寄主的剂量、时间及其互作效应。所测菌株对所有蚜虫均具有毒力,接种后七日的LD_(50)为1.25×10~5～114.82×10~5孢子/mL,毒力因蚜种而异,双尾蚜和忽布疣额蚜最为敏感,玉米蚜与禾谷缢管蚜的敏感性相对较低,其余居间。这些结果表明所试菌株具有作为蚜虫微生物防治候选因子的潜势。本研究采用的分析方法较传统的Probit或Logit分析方法有显著的优越性,将时间和剂量效应的分析统一到一个模型中,使时间与剂量效应的互作评价成为可能。笔者介绍了该模型的生物学基础和建模步骤,并讨论了在生物学研究领域的应用前景。