Influence of high deformation on the microstructure of low-carbon steel

Low-carbon steel sheets DC04 used in the automotive industry were subjected to cold rolling for thickness reduction from 20% to 89%. The desired thickness was achieved by successive reductions using a rolling mill. The influence of thickness reduction on the microstructure was studied by scanning electron microscopy. Microstructure evolution was characterized by the distortion of grains and the occurrence of the oriented grain structure for high cold work. A mechanism of grain restructuring for high cold work was described. The occurrence of voids was discussed in relation with cold work. The evolution of voids at the grain boundaries and inside the grains was also considered. To characterize the grain size, the Feret diameter was measured and the grain size distribution versus cold work was discussed. The chemical homogeneity of the sample was also analyzed.     

Optimization of the Chemical Composition of Cast Iron Used for Casting Ball Bearing Grinding Disks

The chemical composition of cast iron used for casting ball bearing machining disks was varied to optimize the properties such as castability, hardenability, and durability in ball machining. The cast iron characteristics were most strongly dependent on the Ni content and the carbon saturation degree, So. This paper describes the types of test specimens, the working conditions, and the experimental results. The increase of the degree of carbon saturation reduces the tendency to form shrinkholes in the castings. The decrease in the Ni content negatively affects the final hardening treatment. A way to control solidification defects in cast iron, by reducing the Ni content, has been verified on cast disks.     

Boundary layer flow and heat transfer of a micropolar fluid near the stagnation point on a stretching vertical surface with prescribed skin friction

The steady laminar mixed convection boundary layer flow and heat transfer of a micropolar fluid near the stagnation point on a stretched vertical surface with prescribed skin friction were considered. The governing partial differential equations were transformed into a system of ordinary differential equations, which were then solved numerically using the shooting method. Results for the stretching velocity, the local Nusselt number, the temperature, and the velocity profiles are presented for various values of the mixed convection parameter λ and material parameter K when the Prandtl number is equal to 1. Both assisting (heated plate) and opposing (cooled plate) flow regions are considered. It is found that dual solutions exist for both assisting and opposing flows.     

Magnetohydrodynamic flow over a moving plate in a parallel stream with an induced magnetic field

A viscous boundary layer flow of an electrically-conducting fluid over a moving flat plate in a parallel stream with a constant magnetic field applied outside the boundary layer parallel to the plate was investigated. The governing system of partial differential equations was transformed to ordinary differential equations using a similarity transformation. The similarity equations were then solved numerically using a finite-difference scheme known as the Keller-box method. Numerical results of the skin friction coefficient, velocity profiles, and the induced magnetic field profiles were obtained for some values of the moving parameter, magnetic parameter, and reciprocal magnetic Prandtl number. The results indicate that dual solutions exist when the plate and the fluid move in the opposite directions up to a critical value of the moving parameter, whose value depends on the value of the magnetic parameter.     

Alteration of the serine protease PRSS56 causes angle-closure glaucoma in mice and posterior microphthalmia in humans and mice

Angle-closure glaucoma (ACG) is a subset of glaucoma affecting 16 million people. Although 4 million people are bilaterally blind from ACG, the causative molecular mechanisms of ACG remain to be defined. High intraocular pressure induces glaucoma in ACG. High intraocular pressure traditionally was suggested to result from the iris blocking or closing the angle of the eye, thereby limiting aqueous humor drainage. Eyes from individuals with ACG often have a modestly decreased axial length, shallow anterior chamber and relatively large lens, features that predispose to angle closure. Here we show that genetic alteration of a previously unidentified serine protease (PRSS56) alters axial length and causes a mouse phenotype resembling ACG. Mutations affecting this protease also cause a severe decrease of axial length in individuals with posterior microphthalmia. Together, these data suggest that alterations of this serine protease may contribute to a spectrum of human ocular conditions including reduced ocular size and ACG.     

Promising psyllium-based composite containing TiO2 nanoparticles as aspirin-carrier matrix

Composite nanomaterials represent a new trend in the biomedical field. Coupling inorganic/organic constituents with non-toxicity/biocompatibility properties leads to develop the new systems having special characteristics that can be used in various bio-applications. This paper describes the preparation and characterization of psyllium-based composites containing TiO2 nanoparticles in order to develop new therapeutic strategies for aspirin drug delivery. The structural characteristics of obtained materials were investigated by FTIR spectroscopy. The UV–vis spectrophotometric analysis was performed to evaluate the aspirin release behavior under different pH conditions at 37 1C. Combining psyllium(as an excellent source of fiber) with TiO2 inorganic unit(as vehicle of aspirin) it was found that polymeric-TiO2networks have promising potential for controlled aspirin release as therapeutic agent.     

Multiple ADH genes are associated with upper aerodigestive cancers

Alcohol is an important risk factor for upper aerodigestive cancers and is principally metabolized by alcohol dehydrogenase (ADH) enzymes. We have investigated six ADH genetic variants in over 3,800 aerodigestive cancer cases and 5,200 controls from three individual studies. Gene variants rs1229984 (ADH1B) and rs1573496 (ADH7) were significantly protective against aerodigestive cancer in each individual study and overall (P = 10(-10) and 10(-9), respectively). These effects became more apparent with increasing alcohol consumption (P for trend = 0.0002 and 0.065, respectively). Both gene effects were independent of each other, implying that multiple ADH genes may be involved in upper aerodigestive cancer etiology.     

Similarity solutions for the mixed convection flow over a vertical plate with thermal radiation

The steady laminar boundary layer flow adjacent to a vertical plate with prescribed surface temperature immersed in an incompressible viscous fluid, where the effect of thermal radiation was taken into consideration, was investigated. The governing partial differential equations were transformed into a system of ordinary differential equations using similarity transformation, before being solved numerically by the shooting method. Both assisting and opposing buoyant flows were considered. It is found that dual solutions exist for both cases. Moreover, numerical results show that the heat transfer rate at the surface decreases in the presence of the radiation effect.     

Perpendicular switching of a single ferromagnetic layer induced by in-plane current injection

Modern computing technology is based on writing, storing and retrieving information encoded as magnetic bits. Although the giant magnetoresistance effect has improved the electrical read out of memory elements, magnetic writing remains the object of major research efforts. Despite several reports of methods to reverse the polarity of nanosized magnets by means of local electric fields and currents, the simple reversal of a high-coercivity, single-layer ferromagnet remains a challenge. Materials with large coercivity and perpendicular magnetic anisotropy represent the mainstay of data storage media, owing to their ability to retain a stable magnetization state over long periods of time and their amenability to miniaturization. However, the same anisotropy properties that make a material attractive for storage also make it hard to write to. Here we demonstrate switching of a perpendicularly magnetized cobalt dot driven by in-plane current injection at room temperature. Our device is composed of a thin cobalt layer with strong perpendicular anisotropy and Rashba interaction induced by asymmetric platinum and AlOx interface layers. The effective switching field is orthogonal to the direction of the magnetization and to the Rashba field. The symmetry of the switching field is consistent with the spin accumulation induced by the Rashba interaction and the spin-dependent mobility observed in non-magnetic semiconductors, as well as with the torque induced by the spin Hall effect in the platinum layer. Our measurements indicate that the switching efficiency increases with the magnetic anisotropy of the cobalt layer and the oxidation of the aluminium layer, which is uppermost, suggesting that the Rashba interaction has a key role in the reversal mechanism. To prove the potential of in-plane current switching for spintronic applications, we construct a reprogrammable magnetic switch that can be integrated into non-volatile memory and logic architectures. This device is simple, scalable and compatible with present-day magnetic recording technology.