Meet-Cloud for Secure and Accurate Distribution of Negative Messages in Vehicular Ad hoc Network

Keeping Vehicular Ad hoc Network(VANET) from attacks requires secure and efficient distribution of information about bad entities. Negative messages are pieces of information that define the negative attributes of vehicles. By formally defining the negative message, we observe that accuracy is essential for its efficient distribution. We formally define the coverage percentage and accurate coverage percentage to describe the availability and distribution efficiency of negative message. These two metrics can jointly evaluate the performance of a distribution method. To obtain both high coverage percentage and high accurate coverage percentage, we propose meet-cloud, a scheme based on meet-table and cloud computing to securely and accurately distribute negative messages in VANET. A meet-table in a Road Side Unit(RSU) records the vehicles it encounters. All meettables are sent to cloud service to aggregate a global meet-table. The algorithm for distributing and redistributing negative messages are designed. Security analysis shows that meet-cloud is secure against fake and holding on to negative message attacks. Simulations and analysis demonstrate that meet-cloud is secure under denial of service and fake meet-table attacks. The simulation results also justify that meet-cloud outperforms the RSU broadcast and epidemic model.     

Fe掺杂对BiTaO_4陶瓷样品介电和铁电特性的影响

为探究Fe掺杂对BiTaO4陶瓷样品介电特性和铁电特性的影响,采用传统固相烧结法制备了Bi Ta1-xFexO4-x(x=0,0.01,0.03)陶瓷样品,利用X线衍射仪和扫描电子显微镜对样品的晶体结构和表面形貌进行分析,利用精密阻抗分析仪和铁电分析仪对样品的介电性能和铁电性能进行检测.结果表明:Fe掺杂没有明显改变样品的晶体结构;随着Fe掺杂量的增加,样品的介电常数表现出较好的稳定性,介电损耗略有减小,且基本保持在tanδ=0.05以下,其漏电流先增大后减小,且掺杂样品均可得到比较完整的电滞回线.     

关于检查井沉降与解决措施的研究

基于我国检查井施工中出现的不均匀沉降及相关施工问题的实际情况,针对导致上述问题出现的各方面原因进行分析,就优化设计、规范开挖及回填施工、强化检查井的砌筑等方面提出了相应解决措施.以期为我国市政管线建设中的检查井设计及施工提供借鉴.     

A Layer-Stripping Method for 3D Near-Surface Velocity Model Building Using Seismic First-Arrival Times

In order to improve the efficiency of 3D near-surface velocity model building, we develop a layer-stripping method using seismic first-arrival times. The velocity model within a Common Mid-Point (CMP) ...     

Post李超代数结构的性质

通过post李超代数的定义, 讨论post李超代数结构的基本性质, 给出post李超代数的一些存在性结果, 并利用post李超代数可构造LR超代数和左对称超代数, 给出交换post李超代数结构的相关结果.     

乡村振兴绩效评价:意义、维度与路径

2018年,中共中央、国务院印发《中国乡村振兴战略规划(2018-2022年)》,全面部署和布局乡村振兴战略.文章基于政府绩效评价的理念和方法,构建乡村振兴绩效评价指标体系,明确评价维度,为实现乡村振兴、城乡融合发展提供价值导向、度量体系和动力工具.该评价维度包涵资源投入、过程监管、目标实现情况和社会满意度四个方面.文章指出,相关单位以绩效评价推进乡村振兴时应注重顶层设计,强化部门协同,构建评价体系,引入第三方评价主体,凸显农民获得感.     

Speeding Up the GVW Algorithm via a Substituting Method

Journal of Systems Science and Complexity - The GVW algorithm is an efficient signature-based algorithm for computing Gröbner bases. In this paper, the authors consider the implementation of...     

江苏省县域经济增长的趋同与差异分析

运用统计分析方法对江苏省2000~2011年县域经济增长的趋同与差异问题进行实证分析.结果表明,在这11年内出现了σ趋同,但不明显,且该阶段存在绝对β趋同;进一步分析发现,江苏省县域经济差距经历了先扩大后缩小的过程,特别是2007年以来,差距缩小的趋势明显.     

三维打印器件后处理液研究

分析了不同的填充强化剂(后处理A液)、不同的后处理B液基料、后处理B液中水性环氧乳液的掺量及后处理液浸泡时间对石膏基打印器件耐水性、抗压强度、尺寸偏差、表面微观结构的影响.结果表明:经纳米硅超硬固化剂处理后的打印器件抗压强度大幅提高,纳米硅超硬固化剂最适宜作为后处理A液;水性聚氨酯乳液PU-202B最适宜作为后处理B液的基料;后处理B液中加入水性环氧乳液,处理后打印器件的抗压强度增加、吸水率降低,但水性环氧乳液含量增加到一定程度后会出现尺寸偏差;后处理A、B液最佳浸泡时间分别为130 s和35 s;先浸泡后处理A液、后浸泡后处理B液的打印器件具有抗压强度高、吸水率小、表面较光滑、不脱粉等优良性能.