左Clifford双半环的性质与结构

定义了双半环的分配格和带双半环。利用这两个定义以及左Clifford半群的性质,给出了左双环和左Clifford双半环的定义,并得到了双半环是左双环的充分必要条件和双半环是左Clifford双半环的充分必要条件。     

PI-强LU富足半群

通过对C-L^U-富足半群的刻画,给出了PI-强L^U富足半群的结构定理。     

财政性科技经费监管体系探析

我国初步建立了财政性科技经费监管体系,但是在监督主体、监督制度等方面还存在缺陷,科技经费监督出现诸多问题。建立要加强宏观层面的统筹规划,建立由政府、承担单位和外部主体上下联动、横向联合的立体监督体系。     

利用SRTM数据修测高山区地貌的探讨

在高海拔区域测制地形图,如青藏高原地区,所获取的遥感影像局部存在着大范围的高山阴影或云雪覆盖,造成立体观测地貌困难的现象,探讨应用SRTM数据对这类特殊区域地貌进行修测补绘。介绍了数据处理的作业过程,并对实验区SRTM与SPOT5影像立体测图成果进行实验对比分析,成果符合要求。     

Effects of Strain Rate,Temperature and Grain Size on the Mechanical Properties and Microstructure Evolutions of Polycrystalline Nickel Nanowires: A Molecular Dynamics Simulation

Through molecular dynamics(MD)simulation,the dependencies of temperature,grain size and strain rate on the mechanical properties were studied.The simulation results demonstrated that the strain rate from 0.05 to 2 ns~(–1 )affected the Young’s modulus of nickel nanowires slightly,whereas the yield stress increased.The Young’s modulus decreased approximately linearly;however,the yield stress firstly increased and subsequently dropped as the temperature increased.The Young’s modulus and yield stress increased as the mean grain size increased from 2.66 to6.72 nm.Moreover,certain efforts have been made in the microstructure evolution with mechanical properties association under uniaxial tension.Certain phenomena such as the formation of twin structures,which were found in nanowires with larger grain size at higher strain rate and lower temperature,as well as the movement of grain boundaries and dislocation,were detected and discussed in detail.The results demonstrated that the plastic deformation was mainly accommodated by the motion of grain boundaries for smaller grain size.However,for larger grain size,the formations of stacking faults and twins were the main mechanisms of plastic deformation in the polycrystalline nickel nanowire.     

广西高技术产业科技创新能力评价研究

文章在分析广西高技术产业发展现状基础上,构建高技术产业科技创新能力评价指标体系,运用熵值法,基于2015—2019年面板数据对广西高技术产业的创新能力进行实证研究.研究表明:广西高技术产业创新能力在西部五省中处于较低水平;广西高技术创新产出实力略低于创新投入实力,创新技术吸收实力仍相对较弱;广西高技术四大行业创新能力存在差异,即电子及通信设备制造产业科技创新投入和产出效果最好,医药制造业和电子通信及装备制造业创新投入高,创新产出评分偏低,医疗仪器设备及仪器仪表制造产业和计算机及办公设备制造产业创新吸收能力很弱.基于以上结论,文章从加大创新资源投入、推动创新平台建设、加强人才队伍建设等方面提出了对策建议.     

高温作用后砂岩物理力学性质阈值温度的确定——基于机器学习算法

通过采用机器学习算法，提出了高温作用后砂岩物理力学性质变化的阈值温度的确定方法。基于Python语言，利用K-Means、SVM算法，实现了对样本数据的分类和聚类，确定了阈值温度区间，验证了二分类法的合理性和准确性.结果表明，砂岩样本的阈值温度区间为400~600 ℃，阈值温度上下砂岩的物理力学性质存在显著差异，体现为阈值温度区间以下的岩样物理力学性质较为分散，而阈值温度区间以上的岩样物理力学性质较为集中.     

三维打印器件后处理液研究

分析了不同的填充强化剂(后处理A液)、不同的后处理B液基料、后处理B液中水性环氧乳液的掺量及后处理液浸泡时间对石膏基打印器件耐水性、抗压强度、尺寸偏差、表面微观结构的影响.结果表明:经纳米硅超硬固化剂处理后的打印器件抗压强度大幅提高,纳米硅超硬固化剂最适宜作为后处理A液;水性聚氨酯乳液PU-202B最适宜作为后处理B液的基料;后处理B液中加入水性环氧乳液,处理后打印器件的抗压强度增加、吸水率降低,但水性环氧乳液含量增加到一定程度后会出现尺寸偏差;后处理A、B液最佳浸泡时间分别为130 s和35 s;先浸泡后处理A液、后浸泡后处理B液的打印器件具有抗压强度高、吸水率小、表面较光滑、不脱粉等优良性能.     

Pilot Study on Nanofiltration Combined with Ozonation and GAC for Advanced Drinking Water Treatment

IntroductionThe conventional process for surface water treatment,which consists of flocculation, sedimentation and filtrationcurrently, had been applied inproducingdrinkingwater formany years. Although this process can remove turbidityand bacteria in surface water effectively, only about from20% to 30% of natural organic matter ( NOM) can beeliminated. When the purified water is disinfected bychlorination, these NOMs may react with chlorine. As aresult some dis…