光纤色散与OFDL信号处理

光纤色散对OFDL器件功能的影响并不总能忽略。对OFDL陷波器,在现有器件水平下,由于色散ND只能达到30dB左右,远低于测量系统的限制(>55dB)。利用陷波器,也可以测量光纤色散、该方法具有步骤简便、对器件要求低、精度高等优点。     

傅里叶变换红外光声光谱法在纺织上应用

本文叙述了傅里叶变换红外光声光谱法(FTIR-PAS)的基本原理及其在纺织上应用。研究了组合浆料中变性聚乙烯醇的定量测定、涤棉混纺纤维中涤纶的定量测定、苎麻及甲壳素经碱处理后的光谱性质的变化。研究结果表明,以变性聚乙烯醇C=O基团的伸缩振动1570cm~(-1)吸收峰可作为定量测定变性聚乙烯醇的依据。以涤纶分子结构中羰基伸缩振动1725cm~(-1)峰高与纤维分子结构中碳氢键伸缩振动2915cm~(-1)峰高的比值,可定量测定涤棉混纺纤维中涤纶含量。苎麻经碱处理后,非晶谱带898cm~(-1)度明显增加,晶区谱带1430cm~(-1)强度明显下降,其变化程度取决于碱浓度。甲壳素的酰胺吸收峰1555cm~(-1)随碱处理浓度、温度和时间的增加而下降。与常规的红外吸收光谱法相比较,傅里叶变换红外光声光谱法具有无损快速的优点,适宜于制作困难的试样。     

界面处理和冷却条件对玻璃纤维与聚丙烯界面结合的影响 I.不同界面处理对界面剪切强度的影响

通过测定,得出马来酸酐改性聚丙烯（ＭＰＰ）是提高玻璃纤维与聚丙烯树脂界面剪切强度的关键因素,而偶联剂的变化对体系界面剪切强度的影响较少,用仪器分析证实了酸酐基团与玻璃纤维表面发生化学反应的实质,以及当界面存在改性聚丙烯时,应选择Ａ－１７４ＴＭ硅烷偶联剂处理增强聚丙烯的玻璃纤维,而不是传统的Ａ－１１００ＴＭ硅烷偶联剂。     

界面处理和冷却条件对玻璃纤维与聚丙烯界面结合的影响 Ⅱ.不同冷却速度对界面剪切强度的影响

通过对玻璃纤维与聚丙烯界面剪切强度的测量,以及对其界面结晶形态的观测,发现界面产生横晶的充分条件是界面存在较强的相互作用和样品的缓慢冷却。提出了横晶形成机理,并推断横晶的形成会导致玻璃纤维与聚丙烯树脂界面结合强度的明显下降。用观测到的横晶与基体球晶的冲击线进一步证实了横晶形成机理     

光盘表面结构的软模板复制及图案化氧化锌薄膜的纳米压印制备

模板的制备和选择在纳米压印技术中非常重要. 采用廉价的光盘为模板, 利用聚二甲基硅氧烷(PDMS)浇铸到光盘表面, 分离后复制得到光盘的负形结构. 采用纳米压印技术, 以PDMS 软模板作为印章对氧化锌纳米溶胶进行直接压印, 实现了氧化锌薄膜的表面图案化, 经煅烧后得到晶态氧化锌薄膜.     

带边值问题二阶泛函微分方程的非负解

本文利用Leray-Schauder择型一定理研究了带边值问题二阶泛函微分方程的非负解的存在性.     

Effects of the Water in Mixed Solvent on the Epoxidation Reaction of Propylene with TS-1 Catalyst

The epoxidation reaction of propylene and hydrogen peroxide with zeolite catalyst containing titanium-silicalite (TS-1)has been studied, and the reaction in the mixed solvent of water/methanol has been discussed. It is shown that the selective of epoxidation propylene decreases while the selective of propylene glycol increases, when the water content increases in the mixed solvent of me thanol/water.     

Influence of Spinning Technology on Dye Uptake of Modified Polypropylene Fiber

By adding small amount of olefin polymer additive, the dyeability of polypropylene fiber can be improved. Research results show that the improvement of dyeing performance of modified PP fiber is mainly due to the formation of looser structure of PP matrix and the micro-channels among additive particles in blended fiber. The dye uptake of drawn fibers decreases with drawing ratios obviously and changes with temperature of heat plate and heat roller a little.     

Study on the Model of Thermal Channel Spinning Process for PET Polymer

A mathematical model to describe the TCS process inPET high-speed melt-spinning is established.The de-velopment of crystallinity,molecular orientation andmorphological features of high-speed-spun PET fiberin TCS process is investigated at take-up speeds rangingfrom 3600-4400 m/min and thermal channel tempera-tures ranging from 160-200℃ by simulation.The pro-files of tensile force,running velocity,temperature,bi-refringence,crystallinity and diameter in the TCS spin-line for various process conditions are obtained.Thepredicted results using this model are compared with themeasured crystallinty,diameter and birefringence.Theresults indicate that they are in fairly good agreement.The"necking point"in the TCS spinline can be predictedby this model,and its position changes with the corre-sponding process parameters such as take-up speed andthermal channel temperature.It is found that the neck-ing point moves towards the spinneret when the take-upspeed or the thermal channel temperature increases.     

无源光纤网中动态TDMA的一种改进方案

上行方向的多址接入控制是无源光纤网（ＰＯＮ）中的一个关键问题。提出了一种改进的动态ＴＤＭＡ（时分多址联接）的具体实现方案,使上行业务的平均等待时延与光网络单元（ＯＮＵ）中的缓冲器长度大大缩短,系统性能明显改善,同时在测距上也提出了一种新算法。并提出了一种与传统方法不同的等效分析法对多队列的排队系统的平均等待时延作了具体的分析,给出了模拟结果。