Meet-Cloud for Secure and Accurate Distribution of Negative Messages in Vehicular Ad hoc Network

Keeping Vehicular Ad hoc Network(VANET) from attacks requires secure and efficient distribution of information about bad entities. Negative messages are pieces of information that define the negative attributes of vehicles. By formally defining the negative message, we observe that accuracy is essential for its efficient distribution. We formally define the coverage percentage and accurate coverage percentage to describe the availability and distribution efficiency of negative message. These two metrics can jointly evaluate the performance of a distribution method. To obtain both high coverage percentage and high accurate coverage percentage, we propose meet-cloud, a scheme based on meet-table and cloud computing to securely and accurately distribute negative messages in VANET. A meet-table in a Road Side Unit(RSU) records the vehicles it encounters. All meettables are sent to cloud service to aggregate a global meet-table. The algorithm for distributing and redistributing negative messages are designed. Security analysis shows that meet-cloud is secure against fake and holding on to negative message attacks. Simulations and analysis demonstrate that meet-cloud is secure under denial of service and fake meet-table attacks. The simulation results also justify that meet-cloud outperforms the RSU broadcast and epidemic model.     

仿生非光滑花纹沟对轮胎抗滑水性能的影响

以205/55R16乘用车轮胎为研究对象,采用计算流体动力学建立了考虑胎面花纹变形的轮胎滑水分析模型;以气-液二相流数值模型分析了轮胎的滑水性能,并将临界滑水速度仿真值与NASA滑水速度预测值及轮胎发生滑水时力平衡下的速度进行对比.在此基础上,引入仿生减阻理念,研究了夹角为60°、高度为0.6mm的仿生对称V形结构对花纹沟排水量和水流阻力的影响,并将其结构特征信息等效移植到接地区轮胎花纹沟底,进行了仿生花纹轮胎的滑水性能分析.结果表明:所建滑水分析模型可用来分析轮胎滑水时的流体运动特性;相对原花纹轮胎,仿生非光滑花纹沟轮胎通过提高接地区花纹沟内水流速度,降低了胎面动水压力,提高了临界滑水速度.     

A Layer-Stripping Method for 3D Near-Surface Velocity Model Building Using Seismic First-Arrival Times

In order to improve the efficiency of 3D near-surface velocity model building, we develop a layer-stripping method using seismic first-arrival times. The velocity model within a Common Mid-Point (CMP) ...     

乡村振兴绩效评价:意义、维度与路径

2018年,中共中央、国务院印发《中国乡村振兴战略规划(2018-2022年)》,全面部署和布局乡村振兴战略.文章基于政府绩效评价的理念和方法,构建乡村振兴绩效评价指标体系,明确评价维度,为实现乡村振兴、城乡融合发展提供价值导向、度量体系和动力工具.该评价维度包涵资源投入、过程监管、目标实现情况和社会满意度四个方面.文章指出,相关单位以绩效评价推进乡村振兴时应注重顶层设计,强化部门协同,构建评价体系,引入第三方评价主体,凸显农民获得感.     

Speeding Up the GVW Algorithm via a Substituting Method

Journal of Systems Science and Complexity - The GVW algorithm is an efficient signature-based algorithm for computing Gröbner bases. In this paper, the authors consider the implementation of...     

具有Logistic增长项的两种群竞争Keller-Segel模型的稳定性分析

应用线性化方法研究两种群竞争的Keller-Segel模型常数平衡解的个数及其稳定性问题.     

Predicting Initial Formation Temperature for Deep Well Engineering with a New Method

With the progress of science and technology, human beings explore the energy under-ground with thousands of meters. As a thermophysical parameter, initial formation temperature (IFT) plays an essential...     

三维打印器件后处理液研究

分析了不同的填充强化剂(后处理A液)、不同的后处理B液基料、后处理B液中水性环氧乳液的掺量及后处理液浸泡时间对石膏基打印器件耐水性、抗压强度、尺寸偏差、表面微观结构的影响.结果表明:经纳米硅超硬固化剂处理后的打印器件抗压强度大幅提高,纳米硅超硬固化剂最适宜作为后处理A液;水性聚氨酯乳液PU-202B最适宜作为后处理B液的基料;后处理B液中加入水性环氧乳液,处理后打印器件的抗压强度增加、吸水率降低,但水性环氧乳液含量增加到一定程度后会出现尺寸偏差;后处理A、B液最佳浸泡时间分别为130 s和35 s;先浸泡后处理A液、后浸泡后处理B液的打印器件具有抗压强度高、吸水率小、表面较光滑、不脱粉等优良性能.     

基于风廓线雷达的降水云分类方法在海南地区的应用

将风廓线雷达用于热带降水云体进行垂直探测,可以实时对热带地区降水云体进行较准确分类.通过对海口地区降水云系特征(2017年1月～12月)进行统计分析,提出一套基于风廓线雷达探测数据(回波强度、垂直速度和速度谱宽)的热带降水云体分类方法.以该方法为基础,结合天气雷达等观测资料,对2017年发生在海口地区的两次降水过程展开详细分析.结果表明:风廓线雷达具备较好体现降水云体垂直结构的能力,相比于天气雷达,风廓线雷达探测数据可以更精细地描述降水云系的变化趋势;相比于传统降水分类方案,采用以风廓线雷达探测数据为基础的分类方案可以提高对复杂降水类型识别的正确率;风廓线雷达可以更好地描述快速过境的高空微弱对流系统.     

正交试验优化手性镍催化不对称反应条件研究

用正交试验法优化手性镍催化二乙基锌对α，β不饱和酮的不对称麦克尔加成反应条件，优化后的不对称麦克尔加成反应的一般条件为：低温(近反应溶剂冰点)，常压，非质子非极性溶剂(环己烷)．