铸造工艺仿真设计前处理及过程处理应用技术

以应用ProCAST和MAGMAsoft 2款软件为例，针对铸造工艺仿真设计前处理和过程处理每个环节的主要内容与使用方法进行了较为详细地归纳、分析和总结。提出了处理过程的技术路线，并系统地介绍了每项应用内容的操作平台与使用步骤，从而为高效地应用铸造工艺仿真设计提供理论和技术支持。     

Effects of Strain Rate,Temperature and Grain Size on the Mechanical Properties and Microstructure Evolutions of Polycrystalline Nickel Nanowires: A Molecular Dynamics Simulation

Through molecular dynamics(MD)simulation,the dependencies of temperature,grain size and strain rate on the mechanical properties were studied.The simulation results demonstrated that the strain rate from 0.05 to 2 ns~(–1 )affected the Young’s modulus of nickel nanowires slightly,whereas the yield stress increased.The Young’s modulus decreased approximately linearly;however,the yield stress firstly increased and subsequently dropped as the temperature increased.The Young’s modulus and yield stress increased as the mean grain size increased from 2.66 to6.72 nm.Moreover,certain efforts have been made in the microstructure evolution with mechanical properties association under uniaxial tension.Certain phenomena such as the formation of twin structures,which were found in nanowires with larger grain size at higher strain rate and lower temperature,as well as the movement of grain boundaries and dislocation,were detected and discussed in detail.The results demonstrated that the plastic deformation was mainly accommodated by the motion of grain boundaries for smaller grain size.However,for larger grain size,the formations of stacking faults and twins were the main mechanisms of plastic deformation in the polycrystalline nickel nanowire.     

ρ~0→π~ π~-衰变的么正计算和ρ~0极化插入的虚部

本文给出了ρ~０→π~＋π~－衰变的么正计算及其衰变率和ρ~２极化插入的关系．ρ~０极化插入的虚部是用维度积分的方法来计算．极化插入虚部的计算方法是普适的．     

Structure of astacin and implications for activation of astacins and zinc-ligation of collagenases.

Astacin, a digestive zinc-endopeptidase from the crayfish Astacus astacus L., is the prototype for the 'astacin family', which includes mammalian metallo-endopeptidases and developmentally regulated proteins of man, fruitfly, frog and sea urchin. Here we report the X-ray crystal structure of astacin, which reveals a deep active-site cleft, with the zinc at its bottom ligated by three histidines, a water molecule and a more remote tyrosine. The third histidine (His 102) forms part of a consensus sequence, shared not only by the members of the astacin family, but also by otherwise sequentially unrelated proteinases, such as vertebrate collagenases. It may therefore represent the elusive 'third' zinc ligand in these enzymes. The amino terminus of astacin is buried forming an internal salt-bridge with Glu 103, adjacent to His 102. Astacin pro-forms extended at the N terminus, as observed for some 'latent' mammalian astacin homologues, did not exhibit this 'active' conformation, indicating an activation mechanism reminiscent of trypsin-like serine proteinases.     

快干型复合淀粉粘合剂的研制

在改性淀粉中加入适量聚乙烯醇和脲醛树脂等水溶性高聚物，并加入适量填和催化干剂，可制得稳定性好，粘接强度高，干燥时间短而成本低谦的复合淀粉粘剂。     

平面汞膜电极恒电位阳极溶出极限电流方程式的推导和实验验证

本文推导出膜电极恒电位阳极溶出极限电流方程式,以平面厚汞膜电极对该式进行了实验验证。实验结果与理论式基本相符。     

基于强跟踪滤波器估计的最优融合方法

在分布式雷达数据处理模式中 ,数据融合是获得较精确的目标轨迹的主要环节。为克服卡尔曼滤波器对初始值敏感、鲁棒性差和对机动目标跟踪性能差的缺陷 ,通过利用各传感器的观测数据 ,采用强跟踪滤波器对目标进行跟踪 ,以改善目标状态估计的精度。对判定源于同一目标的状态估计值 ,给出了一种估计状态线进行性组合的最优融合准则。得出了实际数据的实验结果。     

磁致伸缩换能器的编、查表计算法

本文简述定义两个新系数对Camp公式进行变换,以编制磁致伸缩换能器谐振尺寸和频率设计计算用表的方法,分别举例说明利用该表进行考虑修正和不考虑修正的换能器计算的方法。     

一种改进的实信号IFFT算法

由于重量轻、体积小、功耗低、功能强的小卫星工作在无人干预的低温 ,高辐射的空间环境中 ,因此星上计算机系统必须满足集成度高、寿命长、可靠性高、抗辐射能力强的要求。针对立体测绘小卫星的特点 ,我们设计了满足上述要求的集集中控制与分布控制优点于一身的星上计算机系统 ,对其可靠性进行了分析 ,并对提高其可靠性应采取的关键技术进行了简要的论述。     

多变量随机系统的辨识软件IDMR

软件IDMR是用于辨识离散时间多变量随机系统的有效工具,它同时还使用辨识结果给出系统输出仿真。本文介绍IDMR的结构和功能及其特点,并对使用方法和运行操作进行了说明。