A TEM study on the microstructure of spark plasma sintered ZrB_2-based composite with nano-sized SiC dopant

Sintering behavior of ZrB_2 ceramic with nano-sized SiC dopant was studied. ZrB_2-25 vol% nano-sized SiC was selected as the starting mixture to fabricate the composite. The manufacturing process was accomplished at 1800℃ for 5 min under 25 MPa via spark plasma sintering(SPS). The as-sintered sample reached a relative density of 99%. Besides the initial phases, namely ZrB_2 and SiC, the high-resolution X-ray diffraction(HRXRD) was used to study the formation of an in-situ ZrC phase. The possible chemical interactions during the ZrC phase formation were scrutinized. The microstructure of the composite was studied by the field emission scanning electron microscopy(FESEM) and transmission electron microscopy(TEM). Elemental analysis through FESEM evaluations revealed the formation of amorphous phases, rich in Zr, C, Si, B, and O elements, which was in harmony with the thermodynamical assessments. TEM studies endorsed the formation of such phases, containing a glassy bed of Si–B–O with ZrC and C islands dispersed therein.     

Non-Minimum Phase Nonlinear System Predictive Control Based on Local Recurrent Neural Networks

Abstract: After a recursive multi-step-ahead predictor for nonlinear systems based on local recurrent neural networks isintroduced, an intelligent PID controller is adopted to correct the errors including identified model errors and accumulatederrors produced in the recursive process. Characterized by predictive control, this method can achieve a good controlaccuracy and has good robustness. A simulation study shows that this control algorithm is very effective.     

Chromosomal localization of a unique gene by non-autoradiographic in situ hybridization

During the past few years, several methods have been developed for the detection of specific nucleic acid sequences by in situ hybridization using non-radioactive labels such as fluorochromes, cytochemically detectable enzymes and electron-dense markers. These methods are preferable to autoradiography in terms of speed of performance and topological resolution. Their limited sensitivity, however, has so far restricted their use to the detection of repeated sequences. Here we report single gene detection with a procedure using 2-acetylaminofluorene (AAF)-modified probes, immunoperoxidase cytochemistry and reflection-contrast microscopy. We confirmed the autoradiographic data on the localization of the human thyroglobulin (Tg) gene to the distal end of the long arm of chromosome 8. A mixture of cosmid cHT2-derived subclones of the 3' part of the Tg gene, 22.3 kilobase pairs (kbp) in total, was used as a hybridization probe. This procedure can be used to map other unique sequences, if genomic clones are available from which clones with an appropriate amount of inserts can be isolated.     

Inheritance and expression ofEsterase-1 allozymes inPeromyscus leucopus

Summary We analyzed inheritance of 5Es-1 alleles inP. leucopus and found them to be co-dominant and segregating from a single autosomal locus, thereby verifying assumptions of Mendelian inheritance imfield data. We also described an allele that is silent in hemolysate, but is active in liver extract.Acknowledgment. Laboratory analysis was partially supported by a grant-in-aid (No. 0171-02-240-76) to Kaufman from the Research Foundation of State University of New York.     

The effect of daily evening isoproterenol administration on reproductive organ growth in male rats treated neonatally with testosterone propionate

Summary Daily evening injections of isoproterenol extended the period of high pineal N-acetyltransferase activity and retarded the growth of testes, seminal vesicles and prostate in rats treated neonatally with testosterone propionate.The authors are grateful to Mrs Marie Svobodová for her skillful technical assistance.     

The fate of injectant coal in blast furnaces: The origin of extractable materials of high molecular mass in blast furnace carryover dusts

The aim of the work was to investigate the fate of injectant coal in blast furnaces and the origin of extractable materials in blast furnace carryover dusts. Two sets of samples including injectant coal and the corresponding carryover dusts from a full sized blast furnace and a pilot scale rig have been examined. The samples were extracted using 1-methyl-2-pyrrolidinone (NMP) solvent and the extracts studied by size exclusion chromatography (SEC). The blast furnace carryover dust extracts contained high molecular weight carbonaceous material, of apparent mass corresponding to 10⁷?10⁸ u, by polystyrene calibration. In contrast, the feed coke and char prepared in a wire mesh reactor under high temperature conditions did not give any extractable material. Meanwhile, controlled combustion experiments in a high-pressure wire mesh reactor suggest that the extent of combustion of injectant coal in the blast furnace tuyeres and raceways is limited by time of exposure and very low oxygen concentration. It is thus likely that the extractable, soot-like material in the blast furnace dust originated in tars is released by the injectant coal. Our results suggest that the unburned tars were thermally altered during the upward path within the furnace, giving rise to the formation of heavy molecular weight (soot-like) materials.     

Fabrication and Properties of CoSm-Based Multilayer Thin Films

In recent years, SmCo series thin films have been found to be good candidates for fabricating integrated electromagnetic components and ultrahigh density magnetic recording media[1,2]. Up to now,intensive studies of such films have been carried out in order to obtain appropriate microstructure, crystallographic orientation and other properties. Substitution of Cu or Ni for Co in SmCo/Cr series films leads to a decrease of the saturation magnetization, magnetic switching volume, and to an increase of uniaxial anisotropy and coercivity[3-5].Various deposition conditions have also been investigated[6]. The large increase in coercivity for the annealed SmCo/Cr films is due to the growth of crystallitest[7,8]. In this article, we report a study of the deposition process,structure, and magnetic behavior of sputtered Sm (Co,Cu, Ti)/Cr series thin films.     

Low beta diversity of herbivorous insects in tropical forests

Recent advances in understanding insect communities in tropical forests have contributed little to our knowledge of large-scale patterns of insect diversity, because incomplete taxonomic knowledge of many tropical species hinders the mapping of their distribution records. This impedes an understanding of global biodiversity patterns and explains why tropical insects are under-represented in conservation biology. Our study of approximately 500 species from three herbivorous guilds feeding on foliage (caterpillars, Lepidoptera), wood (ambrosia beetles, Coleoptera) and fruit (fruitflies, Diptera) found a low rate of change in species composition (beta diversity) across 75,000 square kilometres of contiguous lowland rainforest in Papua New Guinea, as most species were widely distributed. For caterpillars feeding on large plant genera, most species fed on multiple host species, so that even locally restricted plant species did not support endemic herbivores. Large plant genera represented a continuously distributed resource easily colonized by moths and butterflies over hundreds of kilometres. Low beta diversity was also documented in groups with differing host specificity (fruitflies and ambrosia beetles), suggesting that dispersal limitation does not have a substantial role in shaping the distribution of insect species in New Guinea lowland rainforests. Similar patterns of low beta diversity can be expected in other tropical lowland rainforests, as they are typically situated in the extensive low basins of major tropical rivers similar to the Sepik-Ramu region of New Guinea studied here.