多重网络中的创意扩散模型研究

基于线上线下多种渠道的创意扩散研究是企业管理的新兴研究热点之一.为此,引入多重网络理论与传播动力学理论,考虑工作中线下沟通、工作中通过企业社交媒体在线沟通及非工作时间电子沟通三种渠道,构建多种渠道构成的多重网络中的创意扩散模型.研究创意在多重网络中持续扩散的阈值条件,并对创意在多重网络中的扩散过程进行仿真实验.结果表明:1)当员工在单位时间内通过以上各渠道沟通的平均次数较接近时,在多重网络中创意扩散的速度较快,创意扩散的范围较广;2)与匀质网络相比,当非工作时间电子沟通子网络是无标度网络时,在多重网络中创意扩散的速度较快,扩散的范围较广;3)增大子网络层间创意扩散的相互促进作用对整个多重网络中创意的有效扩散有积极影响.     

共享自动驾驶汽车使用意愿模型及其影响因素

为了构建共享自动驾驶汽车(shared autonomous vehicles，SAV) 的使用意愿模型并分析其影响因素，通过使用时机和使用频率来体现公众对SAV的使用意愿；采用验证性因子分析将态度潜变量转化为潜变量得分，以此将态度潜变量引入传统的有序Logit模型；提出SAV使用意愿的有序Logit模型构建方法，并建立基于个人属性、通勤特征、态度潜变量的SAV使用意愿模型.研究发现:是否使用过滴滴拼车、工作单位停车费、自动驾驶态度对使用时机和3种价格(1，2，3元/km) 下的使用频率有显著影响；使用过滴滴拼车、工作单位收取停车费、支持自动驾驶的群体倾向于频繁地、更早地使用SAV出行；公众期望以1元/km或 2元/km即不超过目前滴滴拼车的价格使用SAV.     

General mechanisms of drought response and their application in drought resistance improvement in plants

Plants often encounter unfavorable environmental conditions because of their sessile lifestyle. These adverse factors greatly affect the geographic distribution of plants, as well as their growth and productivity. Drought stress is one of the premier limitations to global agricultural production due to the complexity of the water-limiting environment and changing climate. Plants have evolved a series of mechanisms at the morphological, physiological, biochemical, cellular, and molecular levels to overcome water deficit or drought stress conditions. The drought resistance of plants can be divided into four basic types-drought avoidance, drought tolerance, drought escape, and drought recovery. Various drought-related traits, including root traits, leaf traits, osmotic adjustment capabilities, water potential, ABA content, and stability of the cell membrane, have been used as indicators to evaluate the drought resistance of plants. In the last decade, scientists have investigated the genetic and molecular mechanisms of drought resistance to enhance the drought resistance of various crops, and significant progress has been made with regard to drought avoidance and drought tolerance. With increasing knowledge to comprehensively decipher the complicated mechanisms of drought resistance in model plants, it still remains an enormous challenge to develop water-saving and drought-resistant crops to cope with the water shortage and increasing demand for food production in the future.     

利用SRTM数据修测高山区地貌的探讨

在高海拔区域测制地形图,如青藏高原地区,所获取的遥感影像局部存在着大范围的高山阴影或云雪覆盖,造成立体观测地貌困难的现象,探讨应用SRTM数据对这类特殊区域地貌进行修测补绘。介绍了数据处理的作业过程,并对实验区SRTM与SPOT5影像立体测图成果进行实验对比分析,成果符合要求。     

循环作用对马蹄寺石窟群岩体性能的影响

马蹄寺石窟群地处河西走廊中部,气候条件十分恶劣。由于常年受到温度、湿度、酸碱盐等作用的影响,石窟岩体性能出现了不同程度的劣化现象。通过开展室内模拟试验,研究以上多种恶劣环境的循环作用对于岩体抗压强度、波速、质量的影响规律,同时使用X射线衍射仪(X-ray diffraction,XRD)、X射线荧光光谱(X-ray fluorescence,XRF)和扫描电子显微镜(scanning electron microscope,SEM)对循环作用过程中样品的矿物组分、元素含量和微观形貌进行分析研究。研究结果表明,循环作用使样品中的长石类矿物和方解石含量降低,黏土类矿物含量增加,胶结程度下降,孔隙逐渐发展成为横向微裂隙,导致样品的性能出现不同程度的劣化现象。循环作用对岩体性能的影响程度从大到小依次为冻融循环、耐盐循环、耐碱循环、耐酸循环和温湿循环。     

迹为整数的3×3阶正交矩阵的谱

讨论了3×3阶正交矩阵的特征值和迹的关系,证明了迹为整数的3×3阶正交矩阵的谱可由迹确定,为应用广泛的3×3阶正交矩阵的谱的计算提供了简单实用的方法.     

An Economic Model-Based Matching Approach Between Buyers and Sellers Through a Broker in an Open E-Marketplace

A broker in an open e-marketplace enables buyers and sellers to do business with each other. Although a broker plays an important role in e-marketplaces, theory and guidelines for matching between buyers and sellers in multi-attribute exchanges are limited. Therefore, a challenge for a broker’s responsibility is how to maximize a buyer’s total satisfaction degree as its goals under the consideration of trade-off between a buyer’s buying quantity and price paid to a seller, and other attributes. To solve this challenge, this paper proposes an economic model-based matching approach between a buyer’s requirements and a seller’s offers. The major contributions of this paper are that (i) a broker can model a seller’s price policy as per a buyer’s buying quantity through communication between a broker and a seller; (ii) due to each buyer’s different quantity demand, a broker models a buyer’s satisfaction degree as per a buyer’s buying quantity based on communication between a broker and a buyer; and (iii) to carry out a broker’s matching processes, an objective function and a set of constraints are generated to help a broker to maximize a buyer’s total satisfaction degree. Experimental results demonstrate the good performance of the proposed approach.     

基于修正斜压场的RC框架边节点剪切性能分析

为研究钢筋屈服强度和混凝土抗压强度对钢筋混凝土(RC)框架边节点剪切性能的影响规律,基于修正斜压场理论(MCFT),对某框架边节点的剪切应力-应变骨架曲线进行数值模拟,并与试验结果进行对比.在验证MCFT算法的精度后,研究钢筋屈服强度和混凝土抗压强度两个参数变化对RC框架边节点剪切应力-应变骨架曲线和峰值剪切应力的影响规律.结果表明:基于MCFT可以较好地模拟RC框架边节点的剪切应力-应变关系曲线; RC框架边节点的峰值剪切应力对混凝土抗压强度的变化更为敏感,但当试件的钢筋(HRB400)屈服应力下降幅度超过16.45%时,对钢筋屈服应力的变化更为敏感;当试件的钢筋(HRB400)屈服应力下降幅度超过10%时,节点发生钢筋滑移破坏,此时峰值剪切应力会大幅下降.     

Study on the Centralization Strategy of the Blood Allocation Among Different Departments within a Hospital

By far, the researches on how to distribute blood products among different departments in hospital have not been further studied, though the problem of blood shortage and wastage that caused by improper blood allocation is severe, which may endanger patient’s lives and impose considerable costs on hospitals. In order to solve this problem, this paper mainly studies on how to distribute the blood items among different departments within a hospital and investigates the allocation approach with the novel management method by centralizing the inventory of several different departments. By integrating the blood inventory requirements of some departments, the hospital could reduce the rate of blood shortage and wastage effectively, release the pressure of the occupancy of resources and reduce the bullwhip effect of blood products. This paper illustrates the centralization principle in hospital and formulates the mixed integer programming model to work out the optimal allocation network scheme and the optimal inventory setting for every department. And the results of the numerical example demonstrate that this centralization method could considerably reduce blood shortage and wastage in hospital by about 72% and 90% respectively. Furthermore, it could decrease the total cost by about 108,540 RMB a month on blood supply chain management in the hospital and improve the effect of some certain surgeries by transfusing the fresh blood to patients.     

Effects of Strain Rate,Temperature and Grain Size on the Mechanical Properties and Microstructure Evolutions of Polycrystalline Nickel Nanowires: A Molecular Dynamics Simulation

Through molecular dynamics(MD)simulation,the dependencies of temperature,grain size and strain rate on the mechanical properties were studied.The simulation results demonstrated that the strain rate from 0.05 to 2 ns~(–1 )affected the Young’s modulus of nickel nanowires slightly,whereas the yield stress increased.The Young’s modulus decreased approximately linearly;however,the yield stress firstly increased and subsequently dropped as the temperature increased.The Young’s modulus and yield stress increased as the mean grain size increased from 2.66 to6.72 nm.Moreover,certain efforts have been made in the microstructure evolution with mechanical properties association under uniaxial tension.Certain phenomena such as the formation of twin structures,which were found in nanowires with larger grain size at higher strain rate and lower temperature,as well as the movement of grain boundaries and dislocation,were detected and discussed in detail.The results demonstrated that the plastic deformation was mainly accommodated by the motion of grain boundaries for smaller grain size.However,for larger grain size,the formations of stacking faults and twins were the main mechanisms of plastic deformation in the polycrystalline nickel nanowire.