Thickness-related synchronous increase in strength and ductility of ultrafine-grained pure aluminum sheets

To explore the specimen size effect of mechanical behavior of ultrafine-grained (UFG) materials with different structures, UFG Al sheets processed by equal channel angular pressing (ECAP) were selected as target materials and the dependency of tensile behavior on sheet thickness (t) was systematically investigated. The strength and ductility of ECAPed UFG Al sheets were improved synchronously as t increased from 0.2 to 0.7 mm, and then no apparent change occurred when t reached to 0.7 and 1.0 mm. The corresponding microstructure evolved from dislocation networks in equiaxed grains into the walls and subgrains and finally into the dominated cells in elongated grains or subgrains. Meanwhile, dense shear lines (SLs) and shear bands (SBs) were clearly observed and microvoids and cracks were initiated along SBs with the increase of t. These observations indicated that the plastic deformation of UFG Al sheets was jointly controlled by shear banding, dislocation sliding, and grain-boundary sliding. Furthermore, the propagation of SBs became difficult as t increased. Finally, the obtained results were discussed and compared with those of annealed UFG Al and UFG Cu.     

New Develoopment of the Basic Theory of Extenics

In this paper,the new development of three basic theories of Extenics,incluing basic-element theory,extension set theory and extension logic theory ,has been introduced.And the new theoretical frame of Extenics has also been set forth.     

《从藏东康区住宅形式谈藏族住宅建筑艺术的沿革》

从藏东康区的多种住宅形式概述藏族住宅建筑艺术的沿革。     

图像相关方法中采用多种子区进行位移测量

在图像相关位移测量方法中一般采用正方型子区搜索中心点的位移.当测量靠近裂纹或缺陷部位的位移时中心型子区失去效果,为了解决这一问题提出了非中心型子区的方法.证明了方法的有效性.认为在相关搜索时测量点既可选定在子区的中心位置,也可选定在非中心位置.进而提出了将测量点确定在子区角点的多种子区的方法.除通常的中心型子区外,至少还有4种子区可以采用,分别是右下角型、左下角型、右上角型和左上角型,这4种子区不但适用于表面裂纹或缺陷部位的位移测量,而且增加了图像有效信息的提取面积.     

LIDAR基本原理及其在电力勘测中的应用

机载LIDAR系统作为新一代的航空遥感系统集成了DGPS、IMU、激光扫描仪、航空数码相机、中心控制单元等设备,具有十分广泛的用途。本文首先介绍了机载LIDAR系统的原理及组成,最后就机载LIDAR系统在电力勘测设计中的应用进一步作了探讨和叙述。     

范德华力：生物学家、化学家、工程师和物理学家手册

分子间的范德华力是十分微弱的，但可以说普遍的存在着，在很多体系中起着巨大的作用，在物理学、化学、生物学等学科中得到了广泛的研究。但怎样计算范德华力？如何考虑各种条件对范德华力的影响？     

栗瘿蜂与中华长尾小蜂的消长规律

栗瘿蜂在定区域内呈周期性发生，十年左右暴发一次，大发生持续２～３年，可自然“消退”。影响栗瘿蜂发生的计导因素是奇生性天敌，中华长尾小蜂是最主要的天故种群，两者相辅助相承、相互制约。它们之比称益害比，益害比低时，栗瘿蜂虫直线上升，址对大发生；益害比１ⅱ：５左右时，可抑制栗瘿蜂大发生，仍造成一定的为害；益害比在１：５以上时，可控制栗瘿蜂的发生。益害比可作为栗瘿蜂发生预测指标。     

An ERP study for the degrees of the difficulty in visual search

The present study mainly probed the relationships between ERP components and the degrees of difficulty in visual search. Three experimental and one controlled conditions were randomly selected. Results showed that the P1, N1, and P2 amplitudes and latencies had no significant differences among the three experimental and one controlled conditions, and the ERP waveforms of low perceptual load of visual search were different from that of high perceptual load. These results might indicate that the latencies and amplitudes of initial P1, N1 and P2 in high and low perceptual load conditions were almost the same. The ERP waveforms of parallel search were very different from that of serial search, and the ERP waveforms of serial search were very similar. The P3 amplitudes increased as the degrees of the difficulty in visual search decreased.     

(Mn1-xCox)65Ge35(x=0.2～0.5)合金的磁热效应

在氩气的保护下用熔炼法制备了(Mn1-xCox)65Ge35系列合金,通过X射线衍射和振动样品磁强计研究了样品的结构和磁熵变.结果表明,(Mn1-xCox)65Ge35系列合金在Co含量x=0.2时,样品为正交结构,磁矩反铁磁排列; 当Co含量0.2≤x≤0.5时,样品为六角结构,磁矩铁磁排列.随着Co含量的增加,合金的居里温度在250～302K范围内变化.在低磁场(0-1.5T)下,(Mn1-xCox)65Ge35系列合金的最大等温磁熵变为1.7J·kg-1·K-1.