Template/surfactant free and UV light irradiation assisted fabrication of Mn-Co oxides composite nanorings: Structure and synthesis mechanism

A facile, green, cost effective, and template or surfactant free strategy via a two-step route i.e. UV irradiation followed by dissolution-growth for the controlled synthesis of Mn-Co composite nanorings at room temperature was proposed. The nanorings structures and the process were systematically studied via TEM, HRTEM, EDX and XRD. Bir-MnO_2 nanosheets first formed through the direct photolysis of KMnO_4 under UV light irradiation. This was followed by a dissolution-growth process via the dissolution of Bir-MnO_2 nanosheets by the generated H~+ from the redox reaction between the added Co(NO_3)_2 and residual KMnO_4, as well as the accompanied formation of CoOOH, and Mn-Co composite nanorings. It was found that a balance between the dissolution and growth rate was needed. Suitable pH, KMnO_4 presence and the starting nanosheets like Bir-MnO_2 were the key factors for the formation of nanorings. The obtained Mn-Co nanorings/TiO_2 showed enhanced efficiency for the catalytic oxidation of HCHO. Based on the above understandings, it is believed that the developed dissolution-growth method can be adopted for the designing and preparation of other Mn-Co composite nanostructures which can be further applied for environmental pollution remediation.     

Robust Adaptive Multi-Switching Synchronization of Multiple Different Orders Unknown Chaotic Systems

Multi-switching synchronization(MSS) of multiple different orders unknown chaotic(UC)systems confines hacking in the digital transmission process. Similarly, the suppression of undesirable chattering increases synchronization performance. This paper proposes a new robust synchronization control(RASC) technique and discusses the MSS of multiple different orders UC systems. This controller accomplishes(i) quick convergence,(ii) reduces the transient oscillations, and(iii) the rate of convergence decreases in the vicinity of the origin that causes the suppression of chattering. Analysis based on the Lyapunov direct method assures this convergence behavior with any positive values of the feedback gains. This work also provides parameters updated law that estimates the true values of unknown parameters. Numerical examples of five UC systems different orders are simulated. The computer based graphical results validate the efficiency and performance of the proposed RASC technique and the synchronization strategy when compare to peer works. In the simulation, the proposed synchronization strategy successfully recovers an encrypted received image on a communication channel.The article suggests some future research problems to extend the use of the proposed work.     

Effect of Graphene Nanoplatelets addition on mechanical properties of pure aluminum using a semi-powder method

In recent years, graphene has attracted considerable research interest in all fields of science due to its unique properties. Its excellent mechanical properties lead it to be used in nano-composites for strength enhancement. This paper reports an Aluminum–Graphene Nanoplatelets(Al/GNPs)composite using a semi-powder method followed by hot extrusion. The effect of GNP nano-particle integration on tensile, compressive and hardness response of Al is investigated in this paper. It is demonstrated that 0.3 wt% Graphene Nanoplatelets distributed homogeneously in the matrix aluminum act as an effective reinforcing filler to prevent deformation. Compared to monolithic aluminum(in tension), Al–0.3 wt% GNPs composite exhibited higher 0.2% yield strength(+14.7%), ultimate tensile strength(+11.1%) and lower failure strain( -40.6%). Surprisingly, compared to monolithic Al(in compression), Al–0.3 wt% GNPs composite exhibited same 0.2% compressive yield strength and lower ultimate compression strength(- 7.8%),and lower failure strain(- 20.2%). The Al–0.3 wt% GNPs composite exhibited higher Vickers hardness compared to monolithic aluminum(+11.8%).Scanning electron microscopy(SEM), Energy-Dispersive X-ray Spectroscopy(EDS) and X-ray diffraction(XRD) were used to investigate the surface morphology, elemental percentage composition, and phase analysis, respectively.     

Advances in Electrospun Nanofiber Yarns

In order to increase the application area of nanofibers, electrospun nanofiber yarns have drawn attention of many researchers around the globe. Once the production method of nanofiber yarn is mature enough to be universally accepted, many new gates of applications will open to the world. In this review, different electrospinning techniques of electrospun nanofiber yarns are divided into needle electrospinning and needleless electrospinning. Considering yarn twist as an important mechanism, needle electrospinning technique is further categorized into mechanical, electrical and field flow twisting methods. Moreover, parameters influencing the mechanical properties of electrospun nanofiber yarns are investigated. Methods of improving mechanical properties of nanofiber yarns are addressed, including hot-water-bath treatment, addition of carbon nanotubes(CNTs) and introducing regulators. Finally, applications of electrospun nanofiber yarns in different fields of smart textile and bioengineering are summed-up. In summary, challenges encountered in the industrialization of nanofiber yarns and future prospects are anticipated.     

Spider mites (Acari: Tetranychidae) of Saudi Arabia: two new species,new records and a key to all known species

A total of 18 spider mite species belonging to 10 genera of the family Tetranychidae (Acari: Prostigmata) are reported from different provinces of Saudi Arabia (SA). Among these, two new species, Sonotetranychus madinahensis sp. nov. and Tetranychus salicornicus sp. nov., belonging to the subfamily Tetranychinae are described and illustrated. Also, five genera and 11 species are new to the mite fauna of SA. The distribution and host data of all recorded species in the current study are provided. A key to all spider mite species of SA is provided as well as a key to the species of the armenychus species group of the genus Tetranychus Dufour, based on males.

www.zoobank.org/urn:lsid:zoobank.org:pub:C41BB3ED-99D5-4DCF-B557-09526FA7D56B     

Proliferation status defines functional properties of endothelial cells

Homeostasis of solid tissue is characterized by a low proliferative activity of differentiated cells while special conditions like tissue damage induce regeneration and proliferation. For some cell types it has been shown that various tissue-specific functions are missing in the proliferating state, raising the possibility that their proliferation is not compatible with a fully differentiated state. While endothelial cells are important players in regenerating tissue as well as in the vascularization of tumors, the impact of proliferation on their features remains elusive. To examine cell features in dependence of proliferation, we established human endothelial cell lines in which proliferation is tightly controlled by a doxycycline-dependent, synthetic regulatory unit. We observed that uptake of macromolecules and establishment of cell–cell contacts was more pronounced in the growth-arrested state. Tube-like structures were formed in vitro in both proliferating and non-proliferating conditions. However, functional vessel formation upon transplantation into immune-compromised mice was restricted to the proliferative state. Kaposi’s sarcoma-associated herpes virus (KSHV) infection resulted in reduced expression of endothelial markers. Upon transplantation of infected cells, drastic differences were observed: proliferation arrested cells acquired a high migratory activity while the proliferating counterparts established a tumor-like phenotype, similar to Kaposi Sarcoma lesions. The study gives evidence that proliferation governs endothelial functions. This suggests that several endothelial functions are differentially expressed during angiogenesis. Moreover, since proliferation defines the functional properties of cells upon infection with KSHV, this process crucially affects the fate of virus-infected cells.     

Mutations in lectin complement pathway genes COLEC11 and MASP1 cause 3MC syndrome

3MC syndrome has been proposed as a unifying term encompassing the overlapping Carnevale, Mingarelli, Malpuech and Michels syndromes. These rare autosomal recessive disorders exhibit a spectrum of developmental features, including characteristic facial dysmorphism, cleft lip and/or palate, craniosynostosis, learning disability and genital, limb and vesicorenal anomalies. Here we studied 11 families with 3MC syndrome and identified two mutated genes, COLEC11 and MASP1, both of which encode proteins in the lectin complement pathway (collectin kidney 1 (CL-K1) and MASP-1 and MASP-3, respectively). CL-K1 is highly expressed in embryonic murine craniofacial cartilage, heart, bronchi, kidney and vertebral bodies. Zebrafish morphants for either gene develop pigmentary defects and severe craniofacial abnormalities. Finally, we show that CL-K1 serves as a guidance cue for neural crest cell migration. Together, these findings demonstrate a role for complement pathway factors in fundamental developmental processes and in the etiology of 3MC syndrome.     

Identification of an S5n allele in Oryza rufipogon Griff. and its effect on embryo sac fertility

Oryza rufipogon exhibits abundant genetic diversity and contains many elite genes. In this work, a total of 441 accessions of O. rufipogon were genetically examined using the functional marker S5n, revealing that 18 accessions carried the S5n allele with a heterozygous genotype (S5nS5i/j). Of these accessions, 14 were from Guangdong Province, 2 from Guangxi Zhuang Autonomous Region, 1 from Hainan Province and 1 from Jiangxi Province. Further sequence analysis spanning both sides of the deletion in S5n allel...     

Contrasting origins of the upper mantle revealed by hafnium and lead isotopes from the Southeast Indian Ridge

The origin of the isotopic signature of Indian mid-ocean ridge basalts has remained enigmatic, because the geochemical composition of these basalts is consistent either with pollution from recycled, ancient altered oceanic crust and sediments, or with ancient continental crust or lithosphere. The radiogenic isotopic signature may therefore be the result of contamination of the upper mantle by plumes containing recycled altered ancient oceanic crust and sediments, detachment and dispersal of continental material into the shallow mantle during rifting and breakup of Gondwana, or contamination of the upper mantle by ancient subduction processes. The identification of a process operating on a scale large enough to affect major portions of the Indian mid-ocean ridge basalt source region has been a long-standing problem. Here we present hafnium and lead isotope data from across the Indian-Pacific mantle boundary at the Australian-Antarctic discordance region of the Southeast Indian Ridge, which demonstrate that the Pacific and Indian upper mantle basalt source domains were each affected by different mechanisms. We infer that the Indian upper-mantle isotope signature in this region is affected mainly by lower continental crust entrained during Gondwana rifting, whereas the isotope signature of the Pacific upper mantle is influenced predominantly by ocean floor subduction-related processes.