团簇Co3FeP异构化反应的热力学与动力学研究

为了寻找团簇Co₃FeP的稳定性、结构和内部作用力等规律，利用密度泛函理论，在B3LYP/Lanl2dz的量化水平下对团簇Co₃FeP进行理论计算，得到5种优化构型，并从化学反应热力学与动力学的角度对其异构化反应中的反应物、过渡态和生成物进行了讨论分析。结果表明，所有构型均为C1对称且构型的空间结构对其熵值有影响；构型的稳定性主要由金属原子与非金属原子所决定，并且在常温常压下构型1^（3）、2^（3）和3^（3）可以稳定存在，是大部分异构化反应的最终产物。因此，在实际材料的开发中，不仅需要注意金属原子与非金属原子之间的作用力以确保构型的稳定性，还应首先考虑对稳定构型1^（3）、2^（3）和3^（3）进行相关研究。     

复合跟踪微分器在电容式位移传感器中的应用

针对从含噪原始信号中提取位置以及速度信息,经典跟踪微分器存在不能很好兼顾相位滞后和噪声放大问题、参数多,调试复杂等不足.在跟踪微分器等效线性分析基础上,提出复合形式跟踪微分器,用于电容式位移传感器位置信号跟踪以及速度信号估计,通过MATLAB\SIMULINK仿真以及实验平台测试,结果表明:在跟踪频率1 Hz、幅值1含噪声正弦信号中,复合跟踪微分器能光滑逼近原始位置信号,且能有效进行速度估计,相较于经典跟踪微分器,复合跟踪微分器跟踪相位滞后小0.03 rad,能更好兼顾跟踪信号相位滞后及速度信号噪声放大.     

大学生勤工助学体验性学习实践模式探索

以北京联合大学的大学生勤工助学体验性学习实践为例,通过课题研究,探讨了适用于高校大学生勤工助学体验性学习实践的模式。     

基于曼哈顿距离构建非参数Q矩阵修正方法

将被试得分、理想反应距离和被试得分异常原理相结合,并加入属性计分下的被试得分特性,开发了用于多级评分情境下属性计分曼哈顿距离法(SA-MD),在不同条件下验证了SA-MD的稳定性和适宜性.通过模拟研究和实证研究表明:(i)从逻辑推导出SA-MD用于多级评分情境下Q矩阵修正更合理;(ii)在多种条件中,SA-MD 均有较优的修正效果,适用范围更广,稳定性更高;(iii)当小样本测验进行Q矩阵修正时,使用SA-MD方法可获得更优的效果.     

An Economic Model-Based Matching Approach Between Buyers and Sellers Through a Broker in an Open E-Marketplace

A broker in an open e-marketplace enables buyers and sellers to do business with each other. Although a broker plays an important role in e-marketplaces, theory and guidelines for matching between buyers and sellers in multi-attribute exchanges are limited. Therefore, a challenge for a broker’s responsibility is how to maximize a buyer’s total satisfaction degree as its goals under the consideration of trade-off between a buyer’s buying quantity and price paid to a seller, and other attributes. To solve this challenge, this paper proposes an economic model-based matching approach between a buyer’s requirements and a seller’s offers. The major contributions of this paper are that (i) a broker can model a seller’s price policy as per a buyer’s buying quantity through communication between a broker and a seller; (ii) due to each buyer’s different quantity demand, a broker models a buyer’s satisfaction degree as per a buyer’s buying quantity based on communication between a broker and a buyer; and (iii) to carry out a broker’s matching processes, an objective function and a set of constraints are generated to help a broker to maximize a buyer’s total satisfaction degree. Experimental results demonstrate the good performance of the proposed approach.     

Study on the Centralization Strategy of the Blood Allocation Among Different Departments within a Hospital

By far, the researches on how to distribute blood products among different departments in hospital have not been further studied, though the problem of blood shortage and wastage that caused by improper blood allocation is severe, which may endanger patient’s lives and impose considerable costs on hospitals. In order to solve this problem, this paper mainly studies on how to distribute the blood items among different departments within a hospital and investigates the allocation approach with the novel management method by centralizing the inventory of several different departments. By integrating the blood inventory requirements of some departments, the hospital could reduce the rate of blood shortage and wastage effectively, release the pressure of the occupancy of resources and reduce the bullwhip effect of blood products. This paper illustrates the centralization principle in hospital and formulates the mixed integer programming model to work out the optimal allocation network scheme and the optimal inventory setting for every department. And the results of the numerical example demonstrate that this centralization method could considerably reduce blood shortage and wastage in hospital by about 72% and 90% respectively. Furthermore, it could decrease the total cost by about 108,540 RMB a month on blood supply chain management in the hospital and improve the effect of some certain surgeries by transfusing the fresh blood to patients.     

Effects of Strain Rate,Temperature and Grain Size on the Mechanical Properties and Microstructure Evolutions of Polycrystalline Nickel Nanowires: A Molecular Dynamics Simulation

Through molecular dynamics(MD)simulation,the dependencies of temperature,grain size and strain rate on the mechanical properties were studied.The simulation results demonstrated that the strain rate from 0.05 to 2 ns~(–1 )affected the Young’s modulus of nickel nanowires slightly,whereas the yield stress increased.The Young’s modulus decreased approximately linearly;however,the yield stress firstly increased and subsequently dropped as the temperature increased.The Young’s modulus and yield stress increased as the mean grain size increased from 2.66 to6.72 nm.Moreover,certain efforts have been made in the microstructure evolution with mechanical properties association under uniaxial tension.Certain phenomena such as the formation of twin structures,which were found in nanowires with larger grain size at higher strain rate and lower temperature,as well as the movement of grain boundaries and dislocation,were detected and discussed in detail.The results demonstrated that the plastic deformation was mainly accommodated by the motion of grain boundaries for smaller grain size.However,for larger grain size,the formations of stacking faults and twins were the main mechanisms of plastic deformation in the polycrystalline nickel nanowire.     

Fuzzy Views on Black-Litterman Portfolio Selection Model

In this paper, views of investor are described in fuzzy sets, and two fuzzy Black-Litterman models are constructed with fuzzy views and fuzzy random views respectively. In the models, expected returns and uncertainty matrix of views are redefined and the views are formulated by fuzzy approaches suitably. Then the models are tested with data from Chinese financial markets. Empirical results show that the fuzzy random views model performs the best, and both the fuzzy models are better than the traditional ones, demonstrating that the fuzzy approaches can contain more information in the views and measure the uncertainty more correctly.     

架空地线电磁感应电流计算与仿真分析

对架空地线电磁感应电流产生的机理进行分析,利用ATP-EMTP上搭建不同电压等级的架空线路模型,并计算光纤复合架空地线(Optical Fiber Composite Overhead Ground Wire, OPGW)上的电磁感应电流,分析了影响OPGW上感应电流大小的因素,为实测及利用此感应电流进行感应取电提供参考依据.     

SAR图像并行拼接方法研究与实现* 〖HT4K〗——基于改进完全二叉树模型

随着SAR成像技术的快速发展，SAR图像覆盖的地域范围与成像精度也在迅速增长，这对SAR图像拼接工作的实时性提出了挑战;文章对SAR图像序列特征进行深入分析，提出了采用基于分割的完全二叉树模型进行SAR图像的并行拼接，并使用MPI点对点通信方式对之进行了不同数量机群规模下的实现；对比实验证明，基于该方法的并行拼接工作比传统并行拼接方法在降低拼接时耗上更加有效，且并行拼接后的完整图像效果良好.