影响地表动态移动和变形的因素

以Knothe模型的函数为基础,对不同推进速度和不同时间影响系数下动态地表移动和变形进行研究.结果证明:提高开采速度有利于减小地表采动损害;时间影响系数c较小时,下沉迟缓,最大动态变形值较小,随着c的增大,地表动态变形值增大.     

Photonic integrated technology for multi-wavelength laser emission

We summarized the design, fabrication challenges and important technologies for multi-wavelength laser transmitting photonic integration. Technologies discussed include multi-wavelength laser arrays, monolithic integration and modularizing coupling and packaging. Fabrication technique requirements have significantly declined with the rise of reconstruction-equivalent-chirp and second nanoimprint mask technologies. The monolithic integration problem between active and passive waveguides can be overcome with Butt-joint and InP array waveguide grating technologies. The dynamic characteristics of multi-factors will be simultaneously measured with multi-port analyzing modules. The performance of photonic integration chips is significantly improved with the autoecious factors compensation packaging technique.     

膜生物反应器处理工业废水的应用研究

介绍了膜生物反应器的类型,并列举了膜生物反应器在不同行业中废水处理中的应用。     

Synthesis of a novel multi-SO3H functionalized strong Brønsted acidic ionic liquid and its catalytic activities for acetalization

The novel multi-SO3H functionalized strong Bronsted acidic ionic liquid has been prepared and its catalytic activities were investigated through the acetalization. The results showed that the novel catalyst was very efficient for the reaction with the average yield over 90% under solvent-free condition at room temperature. Operational simplicity, without need of any solvent, a small amount of usage, low cost of the catalyst used, high yields, applicability to large-scale reactions and reusability are the key features of this methodology. The novel catalyst also has great potential for the green process.     

Morphological control of zinc tricarbohydrazide perchlorate crystals: Theoretical and experimental study

The theoretical crystal-morphology of zinc tricarbohydrazide perchlorate (ZnCP) was studied using the morphology simulation software. The growth trends and surface characteristics were calculated using the Bravais-Friedel-Donnay- Harker (BFDH), Growth Morphology, and Equilibrium Morphology methods; these provide theoretical guidance for the choice of crystal-control reagents. On the basis of the simulations, experiments were carried out to study the effects of five different crystal-control reagents, including carboxymethylcellulose (A), polyacrylamide (B), dextrin (C), Tween 40 (D), and Tween 60 (E), in the control of the crystal-morphology of ZnCP. Mixtures of two reagents and higher temperatures were used to further optimize the ZnCP crystals. The results show that ZnCP crystals are well dispersed, and have a large apparent density and regular crystal-morphology under the control of a mixture of reagents A and E in a mass ratio of 1:4 at 80°C.     

两种消除Klebsiella pneumoniae重组型质粒的方法

对于工业发酵菌种肺炎克雷伯氏菌(Klebsiella pneumoniae),研究发现有两种消除其重组型质粒的有效方法,一种是连续传代培养,另一种是使用消除剂十二烷基硫酸钠(SDS)。对K.pneumoniae重组菌连续20代传代培养后,发现其质粒具有较高的消除率;而以0.2%SDS复合Ca2+处理K.pneumoniae重组菌,也能有效消除其重组型质粒,且该方法省却了反复的传代培养,能快速得到质粒消除菌,更具简便易操作性。消除了质粒的K.pneumoniae能再次接纳新的质粒,有效避免了因质粒不相容性带来的转化不成功,进而可用作宿主菌积累更多的生理性状。     

In-plane elastic stability of fixed parabolic shallow arches

The nonlinear behavior of fixed parabolic shallow arches subjected to a vertical uniform load is investigated to evaluate the in-plane buckling load.The virtual work principle method is used to establish the non-linear equilibrium and buckling equations.Analytical solutions for the non-linear in-plane symmetric snap-through and antisymmetric bifurcation buckling loads are obtained.Based on the least square method,an approximation for the symmetric buckling load of fixed parabolic arch is proposed to simplif...     

Nonlinear optical properties of graphene-based materials

Graphene,a two-dimensional carbon atom sheet,has attracted tremendous attention and research interest because of its exceptional physical properties.Graphene has high mobility and optical transparency,in addition to flexibility,robustness and environmental stability.The main focus so far has been on fundamental physics and electronic devices.However,because the linear dispersion of the Dirac electrons enables ultrawideband tunability,we believe its true potential lies in photonics and optoelectronics.In this review,we introduce recent advances in the nonlinear optical properties of graphene-based materials.The rise of graphene in nonlinear optics is shown by several recent results,ranging from saturable absorbers and the four-wave mixing effect to giant two-photon absorption,reverse saturable absorption and optical limiting.The relevant forms of the graphene-based materials include pure graphene,graphene oxide and graphene hybrids.     

A statistical method for genetic mapping of sterility genes that exhibit epistasis in remote hybridization of plants using molecular markers in an F2 population

Estimation of the position and effect of sterility genes is an important problem to be solved to understand the sterility mechanism in remote hybridization in plants.In this study,a maximum likelihood (ML) method was used for estimation of the position and effect of sterility genes that exhibit epistasis in an F 2 population using the distorted segregation of markers.The ML solutions for recombination fraction and viability were obtained via an expectation-maximization algorithm.The results of Monte Carlo simulations showed that the estimates of recombination fraction and viability were consistent with their true values.The bias and standard deviation of parameters indicated that a larger sample size,closer linkage and lower viability of sterile genes led to better estimates of the parameters involved.A subset of marker data of the F 2 population derived from a single cross between the rice japonica cultivar Nipponbare and the indica cultivar Kasalath was analyzed using this method.Eight sterility genes were identified on chromosomes 1,3,6,8 and 10,and significant epistasis was detected among four pairs of sterility genes.     

Super-plasticity of Zr<Subscript>64.80</Subscript>Cu<Subscript>14.85</Subscript>Ni<Subscript>10.35</Subscript>Al<Subscript>10</Subscript> bulk metallic glass at room temperature

Generally, bulk metallic glasses （BMGs） exhibit a very limited plastic deformation under a compression load at room temperature, often less than 2% before fracturing. In this letter, through an appropriate choice of BMGs＇ composition, an amorphous rod of Zr64.80Cu14.85Ni10.35Al10 with a diameter of 2 mm was prepared by using copper mold suction casting. X-ray diffraction and differential scanning calorimetry were utilized to determine its structure and thermal stability, and the uniaxial compression test was adopted to study its plastic deformation behavior at room temperature simultaneously. The results showed that the glass transition temperature and onset temperature of the exothermic reaction of the amorphous rod were 646 and 750 K, respectively, and its micro-hardness was 594.7 Hv. During compression, when the engineering strain and engineering stress arrived at 9.05% and 1732 MPa, respectively, i.e., the true strain and true stress reached 9.42% and 1560 MPa, respectively, the amorphous rod started to yield. After yielding, with the increase of load, the strain increased and the glass rod ulti- mately were compressed into flake-like form. Although the maximum engineering strain was larger than 70%, i.e., the maximum true strain exceeded by 120%, the amorphous specimen was not fractured, indicating that it has super-plasticity at room temperature. Through the appropriate choice of composition and optimization of the technological process, flexible BMG with super-plasticity at room temperature could be produced.