Preparation and characterization of doubly substituted microwave absorbing material by sol-gel technique for super high frequency applications

Rare earth Dy~(3+)and divalent Mn~(2+)elements substituting W-type hexagonal ferrites Ba_(1-x)Dy_xZn_2Fe_(16-y)Mn_yO_(27)(x=0,0.02,0.06,0.1 and y=0,0.1,0.3,0.5)were prepared by sol-gel method.The thermo-gravimetric analysis(TGA)and differential scanning calorimetry(DSC)was carried out to find the temperature at which single phase can be obtained.XRD patterns indicate the presence of the single phase for all the synthesized samples with the absence of any extra peak due to unreacted material and secondary phases.The occurrence of absorption bands at low wave numbers(563 and 446 cm~(-1)),can be assigned to the stretching vibration of metal and oxygen ions in FTIR spectra,which also confirms the single hexagonal phase for prepared material.The grains are of platelet like structure,which enhances the microwave absorption properties of hexagonal ferrites.The synthesized material exhibits the minimum reflection loss of-20.9 dB at 11.8 GHz frequency,which reflects the applications of this material in super high frequency devices.The microwave conductivity of the material increases with frequency.     

Structural and dielectric properties of doped ferrite nanomaterials suitable for microwave and biomedical applications

The sol–gel auto-combustion method was adopted to synthesize nanomaterials of single-phase X-type hexagonal ferrites with the composition of Sr2?xGdxNi2Fe28?yCdyO46 (x=0.00, 0.02, 0.04, 0.06, 0.08, 0.10 and y=0, 0.1, 0.2, 0.3, 0.4, 0.5). The structural properties were carried out by XRD analysis and the lattice parameters show variation with the doping of Gd–Cd. The average particle size measured by TEM was in the range of 8–10 nm which is beneficial in obtaining suitable signal-to-noise ratio in recording media and biomedical applications. The room temperature resistivity enhanced with the increase of the dopant concentration. The increase in resistivity indicates that the synthesized materials can be considered good for the formation of the multilayer chip inductors (MLCIs) as well as for the reduction of eddy current losses. The dielectric constant decreased with the increase in the frequency which is the general reported trend of the hexagonal ferrites and can be explained on the basis of Koop?s theory and Maxwell–Wagner polarization-model. The abnormal dielectric behavior indicates the formation of small polarons in the material. The maximum value of tangent loss at low frequencies reflects the application of these materials in medium frequency devices (MF).     

(√3)细分曲面的误差界

给出了(√3)细分曲面和其k次细分后控制网之间的误差界估计.误差界是用初始控制点序列的一阶向前极大差分和常数表示的.采用的方法是对四边形细分框架中已有技术的推广.     

硫酸中香蕉皮还原低品位锰矿的浸出行为及动力学模型

Manganese was leached from a low-grade manganese ore (LGMO) using banana peel as the reductant in a dilute sulfuric acid medium. The effects of banana peel amount, H₂SO₄ concentration, reaction temperature, and time on Mn leaching from the complex LGMO were studied. A leaching efficiency of ~98% was achieved at a leaching time of 2 h, banana peel amount of 4 g, leaching temperature of 120°C, manganese ore amount of 5 g, and sulfuric acid concentration of 15vol%. The phase, microstructural, and chemical analyses of LGMO samples before and after the leaching process confirmed the successful leaching of manganese. Furthermore, the leaching process followed the shrinking core model and the leaching rate was controlled by a surface chemical reaction (1 ? (1 ? x)1/3 = kt) mechanism with an apparent activation energy of 40.19 kJ·mol?1.