缀板加强冷弯薄壁C形钢受压极限承载力研究

为研究缀板加强冷弯薄壁C形钢受压构件的受力性能,采用ANSYS软件建立其非线性有限元模型,并与试验破坏特征、极限承载力进行对比,验证建模方法的正确性. 研究缀板间距及偏心距对缀板加强冷弯薄壁C形钢在轴压及单向偏心受压作用下的极限承载力及屈曲模态的影响规律. 结果表明：随缀板间距减小,C形钢的屈曲变形由畸变屈曲逐步转为局部屈曲,轴心受压及偏心受压构件极限承载力逐渐增高;随偏心距增大,偏心受压构件的极限承载力逐渐降低;建议缀板加强冷弯薄壁C形钢轴压、偏压构件的缀板间距分别取λ/3、λ/4（λ为屈曲半波长度）. 基于缀板加强冷弯薄壁C形钢的受力特点及直接强度法,提出缀板加强冷弯薄壁C形钢构件轴压及偏压极限承载力的修正公式,并验证了公式的准确性.     

日本核安全措施的现状

去年10月12日,核安全委员会发表了1989年核安全年报.为了回答民众对切尔诺贝利事故激发的不断增长的核电站安全的关心,该报告就"核电站的故障与失灵和吸取教训等"问题,着重审查了日本核电站安全保障的概念以及它们与故障、失灵的关系.该报告也提出了当代大事件(故障、失灵和其他事件)的详细     

Genetic Diversity in Populations of Sepiella maindroni Using 16S rRNA Gene Sequence Analysis

Part of the 16S rRNA gene is amplified with PCR and sequenced for 5 populations of common Chinese cuttlefish Sepiella maindroni:three from the South China Sea,one from East China Sea and one from Japan.The result shows that a total of 5 nucleotide positions are found to have gaps or insertions of base pairs among these individuals,and 13 positions are examined to be variable in all the sequences,which range from 494 to 509 base pairs.All of the individuals are grouped into 7 haplotypes (h1-h7).No marked genetic difference is osberved among those populations.All of the individuals from Nagasaki belong to h1 and the h3 haplotype is found only in the coastal waters of China.A→←G transition in Nucleotide 255 is suggested to be taken as a kind of genetic marker to identify the populations distributed in East-South China Sea and the Nagasaki waters of Japan.     

A UDDI Based Shared Resources Management Mechanism in Virtual Enetrprises .

Service and information resources are two kinds of major shared resources in virtual enterprises, where, service resources include third party‘s service resources and enterprise‘s legacy service resources, and information resources include database resources and file resources. Since service and information resources have distributed, autonomic, remotely bound as well as some other similar characteristics, an implementation mechanism on managing shared resources based on UDDI are presented. XML instances are used to describe resources authorization information, WSDLbased special XML instance represents information resource metadata, and these XML instancesare referenced by tModel for realizing the purpose of managing shared resources metadata based on UDDI.     

Comparison of metallogenesis and resource potential on the eastern margin of the Jiangnan Upheaval between south Anhui (Wannan) and northeast Jiangxi (Gandongbei) provinces

The southern and northern parts of the eastern margin of the Jiangnan Upheaval, located in the northeast of Jiangxi Province (Gandongbei) and the south of Anhui Province (Wannan) share many similar characteristics of basement composition and structural evolution. However, the two areas have very different metal endowments and ranges of deposit types. The aim of this paper is to compare the metallogenic conditions of the two areas in order to analyze the reasons for these differences and to estimate the preliminary resource potential of the studied areas. It is concluded that difference of the crust-mantle interactions, especially the Yanshanian magmatism in the two areas, is the main reason resulting in difference in the ore-forming processes between Wannan and Gandongbei. The resource potential of Gandongbei is significantly greater than that of Wannan.     

INFLUENCE OF NON-PROCESS ELEMENTS ON REED PULP''''S CHARACTERS DURING OXYGEN DELIGNIFICATION

INTRODUCTIONOxygen delignification is widely used in many bleached pulp-grade operation to diminish the levels of residual lignin in kraft[1]. The chemistry of oxygen delignification has undergone a renaissance in the last decade.Although the chemical structure and reactivity of residual lignin play a role in its effective removal, a variety of metal ions, frequently refers to as non-process elements(NPEs), they are either originated in pulp or introduced are also suggested to strongly a…     

Swelling Studies of Chitosan-Gelatin Films Cross-Linked by Sulfate

0　IntroductionChitosanisadeacetylatedderivativeofchitin ,containinginitsstructure glucosamineandacetylglucosamine joinedthroughβ (1→ 4 )linkages.ItisinsolubleinwaterandcommonorganicsolventsbutsolubleatapHunder 6 .5acidicmedia.Duetoitsexcellentbiodegradableandbiocompatiblecharacter,chi tosanhasbeenexaminedextensivelyinthepharmaceuticalindus tryforitspotentialinthedevelopmentofdrugdeliverysys tems[1 ,2 ] .Gelatinisabiodegradablepolymerofwidesafety ,pro ducedfromcollagen ,themostabundantprote…     

Fabrication of homogeneously dispersed graphene/Al composites by solution mixing and powder metallurgy

Graphene-reinforced aluminum (Al) matrix composites were successfully prepared via solution mixing and powder metallurgy in this study. The mechanical properties of the composites were studied using microhardness and tensile tests. Compared to the pure Al alloy, the graphene/Al composites showed increased strength and hardness. A tensile strength of 255 MPa was achieved for the graphene/Al composite with only 0.3wt% graphene, which has a 25% increase over the tensile strength of the pure Al matrix. Raman spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy, and transmission electron microscopy were used to investigate the morphologies, chemical compositions, and microstructures of the graphene and the graphene/Al composites. On the basis of fractographic evidence, a relevant fracture mechanism is proposed.     

Microstructure and corrosion behavior of Al<Subscript>3</Subscript>Ti/ADC12 composite modified with Sr

In this study, we investigated the effect of the addition of Sr (0wt%, 0.1wt%, 0.2wt%, and 0.3wt%) on the microstructure and corrosion behavior of Al₃Ti/ADC12 composite by optical microscopy, X-ray diffraction, scanning electron microscopy, and energy diffraction spectroscopy. The results reveal that the α-Al phases were nearly spherical and 40 μm in size and that the eutectic Si phases became round in the composite when the Sr content reached 0.2wt%. The Al₃Ti particles were distributed uniformly at the grain boundary. The results of the corrosion examination reveal that the Al₃Ti/ADC12 composite exhibited a minimum corrosion rate of 0.081 g·m–2·h–1 for an Sr content of 0.2wt%, which is two thirds of that of unmodified composite (0.134 g·m–2·h–1). This improved corrosion resistance was due to galvanic corrosion, which resulted from the low area ratio of the cathode to anode regions. This caused a low-density corrosion current in the composite, thereby yielding optimum corrosion resistance.     

Effect of Ce addition on microstructures and mechanical properties of A380 aluminum alloy prepared by squeeze-casting

The effect of cerium (Ce) addition on the eutectic Si, β-Al₅FeSi phase, and the tensile properties of A380 alloy specimens prepared by squeeze-casting were studied by optical microscopy (OM), scanning electron microscopy (SEM), and X-ray diffraction (XRD). The experimental results showed that Ce more effectively modified the eutectic Si and refined the β-Al₅FeSi. The refinement effect significantly increased under a specific pressure of 100 MPa with the addition of Ce from 0.1wt% to 0.9wt%. In contrast, the average length and the aspect ratio of the eutectic Si and β-Al₅FeSi exhibited their optimal values when the content of the added Ce was greater than 0.5wt%. Needle-like Al8Cu4Ce was precipitated with the addition of excessive Ce; hence, the mechanical properties of A380 gradually decreased with increasing Ce content in the range from 0.3wt% to 0.9wt%.